Hikoki G23SCY2 Bedienungsanleitung
Hikoki
Slijpmachine
G23SCY2
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikoki G23SCY2 (41 Seiten) in der Kategorie Slijpmachine. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/41
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/hikoki/g23scy2/html/bg1.png)
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Model
Modèle
Modelo G 23SCY2 Disc Grinder
Meuleuse
Amoladora angular
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the power tool. Please keep this manual available for other
users and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation de cet outil motorisé peut entraîner la mort INCORRECTE OU DANGEREUSE
ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil
motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización de esta herramienta eléctrica puede resultar INAPROPIADA O PELIGROSA
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para
que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual debe
ser guardado en un lugar seguro.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/hikoki/g23scy2/html/bg2.png)
2
English
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the power
tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/hikoki/g23scy2/html/bg3.png)
3
English
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the infl uence of drugs, alcohol or
medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off -position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools with your fi nger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may aff ect the
power tool’s operation.
If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier
to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the power tool for operations diff erent
from those intended could result in a hazardous
situation.
5) Service
a) Have your power tool serviced by a
qualifi ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is
maintained.
SAFETY WARNINGS COMMON FOR
GRINDING OPERATIONS
a) This power tool is intended to function as a
grinder. Read all safety warnings, instructions,
illustrations and specifi cations provided with
this power tool.
Failure to follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
b) Operations such as sanding, wire brushing,
polishing or cutting-off are not recommended to
be performed with this power tool.
Operations for which the power tool was not designed
may create a hazard and cause personal injury.
c) Do not use accessories which are not specifi cally
designed and recommended by the tool
manufacturer.
Just because the accessory can be attached to your
power tool, it does not assure safe operation.
d) The rated speed of the accessory must be at
least equal to the maximum speed marked on the
power tool.
Accessories running faster than their rated speed can
break and fl y apart.
e) The outside diameter and the thickness of your
accessory must be within the capacity rating of
your power tool.
Incorrectly sized accessories cannot be adequately
guarded or controlled.
Produktspezifikationen
Marke: | Hikoki |
Kategorie: | Slijpmachine |
Modell: | G23SCY2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hikoki G23SCY2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Slijpmachine Hikoki
![Hikoki](/images/pdf_free.png)
25 August 2024
![Hikoki](/images/pdf_free.png)
25 August 2024
![Hikoki](/images/pdf_free.png)
5 August 2024
![Hikoki](/images/pdf_free.png)
4 August 2024
![Hikoki](/images/pdf_free.png)
2 August 2024
![Hikoki](/images/pdf_free.png)
31 Juli 2024
![Hikoki](/images/pdf_free.png)
26 Juli 2024
![Hikoki](/images/pdf_free.png)
24 Juli 2024
![Hikoki](/images/pdf_free.png)
24 Juli 2024
Bedienungsanleitung Slijpmachine
- Slijpmachine SilverCrest
- Slijpmachine Cotech
- Slijpmachine Makita
- Slijpmachine Bosch
- Slijpmachine Parkside
- Slijpmachine Vonroc
- Slijpmachine AEG
- Slijpmachine Black And Decker
- Slijpmachine Cocraft
- Slijpmachine FERM
- Slijpmachine Ryobi
- Slijpmachine Skil
- Slijpmachine Trotec
- Slijpmachine Eibenstock
- Slijpmachine Hilti
- Slijpmachine Bort
- Slijpmachine DeWalt
- Slijpmachine Einhell
- Slijpmachine Worx
- Slijpmachine Hitachi
- Slijpmachine Hyundai
- Slijpmachine Hazet
- Slijpmachine Kress
- Slijpmachine Max
- Slijpmachine Metabo
- Slijpmachine Stanley
- Slijpmachine Güde
- Slijpmachine Scheppach
- Slijpmachine Workzone
- Slijpmachine United Office
- Slijpmachine Meec Tools
- Slijpmachine Dremel
- Slijpmachine Proxxon
- Slijpmachine Westfalia
- Slijpmachine Silverline
- Slijpmachine Florabest
- Slijpmachine Baumr-AG
- Slijpmachine Genesis
- Slijpmachine ABB
- Slijpmachine Dolmar
- Slijpmachine Bavaria
- Slijpmachine Brüder Mannesmann
- Slijpmachine Milwaukee
- Slijpmachine Toolcraft
- Slijpmachine Fein
- Slijpmachine Craftsman
- Slijpmachine Powerplus
- Slijpmachine Alpha Tools
- Slijpmachine Ozito
- Slijpmachine Kawasaki
- Slijpmachine Solo
- Slijpmachine Ridgid
- Slijpmachine Ergofix
- Slijpmachine Gamma
- Slijpmachine Global
- Slijpmachine Goon
- Slijpmachine Bunn
- Slijpmachine Meister Craft
- Slijpmachine Yamato
- Slijpmachine Victoria Arduino
- Slijpmachine RIKON
- Slijpmachine Einhell Bavaria
- Slijpmachine Rodcraft
Neueste Bedienungsanleitung für -Kategorien-
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024