Hifonics Brutus BXS8D4 Bedienungsanleitung

Hifonics Subwoofer Brutus BXS8D4

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Hifonics Brutus BXS8D4 (3 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war fĂĽr 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Sealed enclosures offer a range of performance
proîšżles depending on the internal air volume.
Larger enclosures will have a smoother more
extended response while a small enclosure
will have increased output in a more focused
frequency range. Sealed enclosures are the
simplest to construct but do require that the box
be completely air tight.
• Use 3/4” MDF
• Make sure the woofer mounting panel is
full width and height
• Glue all mating surfaces
• Use wood screws
• Use silicone caulk on all internal joints
The internal volume of the
enclosure must be determined
to insure proper performance.
Simply measure height, width and
depth of enclosure you intend
to build. Subtract the material
thickness. Multiply these numbers
and divide by 1728 to get the
volume in cubic feet.
For enclosures with an angled
panel, measure the larger and
smaller depths, add these
together and divide by two. Use
this averaged depth.
Enclosure
Volume
D
H x W x D
1728
D1 + D2
2
Sealed
Vented
Enclosure types
Volume calculation
Subwoofer dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new subwoofers. High power audio
systems have the ability create sound levels above 130dB.
Extended exposure to high sound pressure levels can
cause hearing damage.
Always run any new wiring through safe areas that wont
interfere with the normal operation of the vehicle.
Congratulations on your choice of a Hifonics subwoofer.
This “Quick Start Installation” guide is meant to help you
“hook up” and play music. For more detailed information
on system setting, speaker and subwoofer conîšżguration,
and full speciîšżcations by model, visit the website at
Hifonics.com
It’s a good idea to conrm that you have purchased the
correct size subwoofers to îšżt your vehicle. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional. Be careful
as you go. Always disconnect the negative battery terminal
before starting any electrical work on the vehicle.
BXS8D4 BXS10D4 BXS12D4
Height 12.5” 13” 14.5”
Width 12.5” 13” 14.5”
Depth 9.0” 10” 10.25”
Vb 0.5 ft
30.65 ft30.75 ft3
F3 46 Hz 42 Hz 40 Hz
Qtc .866 .959 1.10
BXS8D4 BXS10D4 BXS12D4
Height 12.5” 13.5” 14.5”
Width 17.5” 18.5” 19.5”
Depth 1 5.5” 6.0” 6.0”
Depth 2 7.5” 8.0” 8.0”
Vb 0.5 ft30.65 ft30.75 ft3
F3 46 Hz 42 Hz 40 Hz
Qtc .866 .959 1.10
Before you start
Rectangular
Angled
Recommended enclosures
Enclosure construction
in(mm) A B C D
BXS8D4 8.43”(214) 2.77”(70) 7.17”(182) 0.57”(14.4)
BXS10D4 10.31”(262) 2.93”(74) 9.06”(230) 0.67”(17)
BXS12D4 12.28”(312) 3.00”(76) 10.59”(269) 0.96”(24)
A
B
D
C
Vented designs are NOT recommended. This
subwoofer is designed to perform in small
sealed enclosures.
Quick Start
Installation Guide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and speciîšżcally excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
www.maxxsonics.com HF BXS shallow wfr QSG 01 - rev1
A Low pass îšżlter will allow only
the bass frequencies to reach the
woofer making for a more natural
transition to the higher frequency
drivers. Check your amplier’s
manual for details.
We recommend using an
electronic subsonic îšżlter. This will
help to protect the woofer from
extreme low frequency distortion.
Many ampliîšżers are equipped
with this type îšżlter. Check your
amplier’s manual for details.
This subwoofer is equipped with
quick disconnect type terminals.
Use crimp type terminals or solder
the wire directly to the terminals.
Depending on the number of woofers you intend to use,
you can conîšżgure the wiring to provide the best impedance
load for your system. Below are some examples. Consult
your amplier’s manual for recommendations.
Low Pass (LPF)
Subsonic
Conîšżgurations
Connections
Subwoofer specicationsCrossovers
Wiring
BXS8D4
BXS10D4
BXS12D4
4 4
82.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
4 4
2
10Hz 100Hz 1000Hz
10Hz 100Hz 1000Hz
BXS8D4 BXS10D4 BXS12D4
NomZ 2 x 4 2 x 4 2 x 4 Ohm
Sd .021 .034 .047 sqM
Revc 6.20 6.90 7.05 Ohm
BL 11.04 14.14 15.38 TxM
Vas 12.19 27.55 53.98 Liters
Cms 192.42 168.01 171.14 um/N
Mms 76.26 130.81 174.42 Grams
Fs 41.5 33.95 29.13 Hz
Qms 4.660 5.440 6.928
Qes 1.010 0.963 0.952
Qts 0.830 0.819 0.837
no 0.081 0.108 0.135 %
SPL@1W 82 83 86 dB
Xmax 8.2 8.7 9.0 mm
RMS 200 300 300 Watts
Peak 400 600 600 Watts


Produktspezifikationen

Marke: Hifonics
Kategorie: Subwoofer
Modell: Brutus BXS8D4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hifonics Brutus BXS8D4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Subwoofer Hifonics

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung fĂĽr -Kategorien-