Hertz SPL Show SP 4.900 Bedienungsanleitung

Hertz Empfänger SPL Show SP 4.900

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hertz SPL Show SP 4.900 (1 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - elettromedia.com
hertz-audio.com
All Specifications Subject to Change Without Notice_22.A
1. Up to 85% efficiency thanks to ADC (Advanced D-Class) output stage
2. USS (Universal Speakers Simulators) allows SP 4.900 to work with head units
featuring the “speaker load detection” circuit
3. 160 W RMS x 4 (4Ω) with ultra-compact size 211.6 x 130 x 49 / 8.3 x 5.1 x 1.9
(mm/inch)
4. IP55 aluminium chassis for maximum protection against humidity and external
agents
5. No cooling fan to prevent internal accumulation of dirt
6. Sealed power cord, line inputs and speaker outputs to prevent oxidation
7. Crossovers filters and controls on a single side to facilitate calibration when the
product is installed
SP 4.900
D-CLASS FOUR CHANNEL AMPLIFIER
1000 W
A205 mm 8.07 in.
B211.6 mm 8.33 in.
C107 mm 4.212 in.
D130 mm 5.118 in.
E49 mm 1.929 in.
POWER SUPPLY
Nominal power supply voltage 11 15 VDC ÷
Pulse Operating voltage 6 16 VDC÷
Idling current 1.1 A
Idling current when off 0.03 mA
Consumption @ 14.4 VDC, MIN load
impedance (Max Musical Power) 50 A
Remote IN 6 15 VDC (9 mA)÷
DC-REM - Remote Turn on by SPK DC
from OUTPUT BTL speakers 3.5 7 VDC÷
AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0,02%
Damping factor @ 1 kHz, 4Ω, 2 VRMS 200
Bandwidth @ -3 dB 10 Hz 35 kHz÷
S/N ratio (A weighted @ 1 V Input) 105 dBA
Pre-In sensitivity 0.6 6 VRMS ÷
Speaker-In sensitivity 2.2 22 VRMS÷
Minimum load impedance
@ 4Ch: 2Ω
@ 3Ch: 2Ω + 2Ω + 4Ω
@ 2Ch: 4Ω
Output power (RMS) @14.4 VDC, 1% THD:
4Ch 160 W x 4 (4Ω)
4Ch 250 W x 4 (2Ω)
3Ch 160 W x 2 (4Ω) + 500 W x 1 (4Ω)
3Ch 250 W x 2 (2Ω) + 500 W x 1 (4Ω)
2Ch 500 W x 2 (4Ω)
INPUTS / OUTPUTS / FILTERS
Inputs Pre IN / Speaker IN
Ch 1-2 Filters:
Full
Hi-pass: 50 5k Hz @ 12 dB/Oct÷.
Lo-pass: 50 5k Hz @ 12 dB/Oct.÷
Ch 3-4 Filters:
Full
Hi-pass: 50 5k Hz @ 12 dB/Oct÷.
Lo-pass: 50 5k Hz @ 12 dB/Oct.÷
Bass Boost 45Hz (adjustable) OUT 3 -4 (0 8 dB) [LP = ON only]÷
CEA SPECIFICATION
Output power @
1% THD+N, 14.4 V 145 W x 4 Ch
SN ratio (ref. 1 W output) 81 dBA
SIZE / WEIGHT
Max size (mm/inch) 211.6 x 130 x 49 8.33 x 5.118 x 1.929/
Weight (kg/lbs) 2.15 4.74/
GENERAL
IP Rating IP55
Operating Temperature Range 0°C (32°F) to 55°C (131°F)
Sealed connectors
Maximum versatility
E

Produktspezifikationen

Marke: Hertz
Kategorie: Empfänger
Modell: SPL Show SP 4.900

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hertz SPL Show SP 4.900 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Hertz

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-