Hatco S-7 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hatco S-7 (40 Seiten) in der Kategorie Heizung. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
Electric Booster Water Heaters
Imperial “S”
Compact “C”
Mini-Compact “MC”
Series
Installation &
Operating Manual
I&W #07.05.001.00
This manual contains important safety information
concerning the maintenance, use and operation of this
product. Failure to follow the instructions contained in this
manual may result in serious injury. If you’re unable to
understand the contents of this manual, please bring it to
the attention of your supervisor. Do not operate this
equipment unless you have read and understood the
contents of this manual.
Este manual contiene importante información sobre
seguridad concerniente al mantenimiento, uso y
operación de este producto. Cualquier falla en el
seguimiento de las instrucciones contenidas en este
manual puede resultar en un serio daño. Si usted no
puede entender el contenido de este manual por
favor pregunte a su supervisor. No opere este
equipo al menos que haya leído y comprendido el
contenido de este manual.
Form No. EBOOSTERM-0406 i
CONTENTS
INTRODUCTION
Hatco Electric Booster Water Heaters are designed
for use with commercial dishwashers to boost the
temperature of the regularly available hot water,
usually 110°-150°F (43°-66°C) up to 180°F (82°C).
Water at 180°F (82°C) can be used as sanitizing
rinse water in commercial dishwashers in
accordance with Health Codes, NSF Standard #5
and plumbing codes.
All Hatco Booster Heaters are ready for electrical
and plumbing service connections, with a pre-set
ambient compensated immersion thermostat(s) and
a high temperature limit switch. The service area is
accessible from the front of the unit, permitting easy
installation.
This manual provides the installation, safety and
operating instructions for the Booster Heaters. We
recommend all installation, operating and safety
instructions appearing in this manual be read prior to
installation or operation of your Booster Heaters.
Safety instructions that appear in this manual after a
warning symbol and the words WARNING or
CAUTION printed in bold face are very important.
WARNING means there is the possibility of
serious personal injury or death to yourself or
others. means there is the possibilityCAUTION
of minor or moderate injury. CAUTION without the
symbol signies the possibility of equipment or
property damage only.
Hatco Electric Booster Water Heaters are a product
of extensive research and field testing. The
materials used were selected for maximum
durability, attractive appearance and optimum
performance. Every unit is thoroughly inspected and
tested prior to shipment.
Important Owner Information...............................i
Introduction ...........................................................i
Important Safety Information..............................1
Model Description................................................4
All Models........................................................4
Imperial Models “S” Series..............................4
Compact Models “C” Series ............................4
Mini-Compact Models “MC” Series .................4
Specications.......................................................5
Circuit Breaker & Fused Disconnect
Switch Sizes....................................................5
Sizing Chart for Low-Temp Dishmachines ......8
Booster Heater Sizing Chart .........................10
Capacity Charts.............................................14
Dimensions....................................................15
Installation ..........................................................16
Location.........................................................16
All Models......................................................17
Pressure & Temperature Relief Valves .........19
Pressure Reducing Valve..............................20
Temperature/Pressure Gauges .....................20
Blended Phosphate Water
Treatment System (Optional) ........................20
Plumbing Connections ..................................20
Electrical-All Sizes and Voltages...................25
Operation ............................................................26
System Start-up.............................................26
Shut Down.....................................................24
Maintenance .......................................................26
General..........................................................27
Accessories........................................................29
Troubleshooting .................................................30
Hatco Limited Warranty.....................................34
Authorized Parts Distributors ............Back Cover
IMPORTANT OWNER INFORMATION
Record the model number, serial number
(identication decal located on the unit), voltage and
purchase date of your Electric Booster Water Heater
in the spaces below. Please have this information
available when calling Hatco for service assistance.
Model No. ________________________________
Serial No. ________________________________
Voltage __________________________________
Date of Purchase __________________________
Business 8:00 a.m. to 5:00 p.m.
Hours: Central Standard Time
(Summer Hours: June to September
8:00 a.m. to 5:00 p.m. C.D.T.
Monday through Thursday
8:00 a.m. to 2:30 p.m. C.D.T. Friday)
Telephone: (800) 558-0607; (414) 671-6350
Fax: (800) 690-2966 (Parts & Service)
(414) 671-3976 (International)
Additional information can be found by visiting our
web site at www.hatcocorp.com
24-Hour 7-Day Parts & Service
Assistance available in the
United States and Canada by
calling (800) 558-0607.
Form No. EBOOSTERM-0406
1
IMPORTANT SAFETY INFORMATION
WARNINGS
To avoid personal injury or damage to
equipment, the booster heater must be
installed by qualified, trained installers.
Installation must conform to all local
electrical and plumbing codes. Check with
your local plumbing and electrical inspectors
for proper procedures and codes.
To avoid any injury or damage to the booster
heater turn the power OFF at the disconnect
switch/circuit breaker and allow to cool
before performing any maintenance or
adjustments.
For proper electrical installation conforming
to local electrical codes and the National
Electrical Code (N.E.C.), consult a licensed
electrical contractor.
To avoid injury or damage to dishwashing
equipment do not connect Hatco Electric
Booster Water Heaters to domestic
(consumer) dishmachines or other domestic
utilized equipment.
To avoid any injury or damage to equipment
and to assure proper operation do not
connect an expansion tank of any type to
booster heater water lines.
To avoid personal injury or damage to the
Hatco Electric Booster Water Heater, only use
plumbing material suitable for a minimum
water temperature of 200°F (93°C). Materials
used must meet National Sanitation
Foundation (NSF) specications and all local
plumbing codes and regulations.
To avoid personal injury or damage to the
unit aftermarket covers must not be placed
on or over the booster heater. Doing so can
cause temperature and moisture build-up
resulting in premature failure and electrical
shock.
It is essential to recognize that even though a
water heater may be properly installed
initially and approved, there always exists the
possibility that unknowing individuals might
alter or change the installation in a manner
that would render it unsafe. Therefore, it is
important that all safety programs provide
some mechanism to assure that these
installations are inspected periodically.
WARNINGS
Hatco has always endorsed the use of safety
equipment when using a booster water heater
or storage-type water heater. Hatco booster
heaters are shipped with a
temperature/pressure relief valve at no extra
charge. This valve must be installed into the
marked opening provided in the tank. Valves
supplied by Hatco are designed for high
temperature commercial operation. Do not
substitute Hatco supplied valves with valves
designed for domestic operation.
Temperature/pressure protective equipment
should not be less than a combination
temperature/pressure relief valve certied by
a nationally recognized testing laboratory
that maintains periodic inspection of the
production of this equipment and meets the
requirements for Relief Valves and Automatic
Shutoff Devices for Hot Water Supply
Systems, ANSI Z21.22-1979. The
temperature/pressure relief valve must be
marked with a minimum set pressure not to
exceed the marked hydrostatic test pressure
of the booster heater as noted on the unit
specications.
To avoid personal injury or damage to the
equipment make sure the dishtable is strong
enough to support the weight of the booster
heater and water when installing with slide
mounting brackets.
To avoid personal injury or damage to the
equipment, follow standard welding
procedures when attaching sliderails to
bottom of dishtable.
Water in the unit is very hot. Wear protective
gloves and proper attire when operating to
avoid injury.
To assure proper operation and avoid a
possible unsafe condition, the booster heater
must be installed in a horizontal position with
the base parallel to the oor and the inlet
connection at the lowest point.
This product contains berglass, a product
known to the state of California to cause
cancer, birth defects or other reproductive
harm.
To avoid any injury or damage do not install
the unit in an area where ammable liquids or
combustible vapors are present.
IMPORTANT! Read the following important safety instructions to avoid personal injury or
death, and to avoid damage to the equipment or property.

Produktspezifikationen

Marke: Hatco
Kategorie: Heizung
Modell: S-7

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hatco S-7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Heizung Hatco

Bedienungsanleitung Heizung

Neueste Bedienungsanleitung für -Kategorien-