Hama Joy Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hama Joy (42 Seiten) in der Kategorie powerbank. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/42
E
F
D
GB
NL
PL
CZ
RUS
Operating Instructions
Bedienungsanleitung
Mode d‘emploi
Instrucciones de uso
Руководство по эксплуа циита
Gebruiksaanwijzing
Instrukcja obsługi
Návod k použití
Návod na použitie
Manual de utilizare
13000 mAhPo Pawer ck oy”J
SK
RO
00
137494
2
Thank you for choosing a Hama product.
Take your time and ad the following instructions and information completely. Please keep thesere
instructions in a safe place for future ference. If you sell the device, please pass these operatingre
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specic hazards
and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
Power ck, 13000 mAhPa
Micro-USB charging/connecting cable
These operating instructions
3. Safety Notes
The product is intended for private, non-commercial use only.
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
Keep this product, as all electrical products, out of the ach of children!re
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits given in the specications.
Do not open the device or continue to operate it if it becomes damaged.
Dispose of packaging material immediately according to locally applicable gulations.re
Since the battery is integrated and cannot be moved, you will need to dispose of the product asre
a whole. Do this in compliance with the legal quirements.re
Do not modify the product in any way. Doing so voids the warranty.
4. Operation
4.1 Charging the Power Pack
Begin charging the power pack by connecting the included Micro-USB charging/connecting cable
to the power pack’s Micro-USB ( ) input and to a suitable USB charger. Please fer toIN 5 V/2.1 A re
the operating instructions for the USB charger used.
Charging begins and ends automatically.
Charge the wer ck fully before using it for the rst time.Po Pa
GOperating instruction
3
Note – Capacity
The capacity is always shown when the wer ck is charging.Po Pa
Each status LED corresponds to 25% of the capacity. When an LED is permanently illuminated, this
indicates that this capacity level has already been ached. The wer ck is charged to at leastre Po Pa
75% if three LEDs are illuminated, and the fourth is ashing.
If all four status LEDs light up, the full capacity is available.
Press the button of the wer ck to switch it on and to check its current capacity.Po Pa
To switch the wer ck off, press and hold the button until the status LEDs go out.Po Pa
Warnung – Battery
Only use suitable charging devices or USB connections for charging.
As a rule, do not charge devices or USB connections that are defective and do not try to pair themre
yourself.
Do not overcharge the product or allow the battery to completely discharge.
Avoid storing, charging or using batteries in extreme temperatures.
When stored over a long period of time, batteries should be charged gularly (at least every threere
months).
4.2 Charging terminal devices
Connect the included Micro-USB charging/connecting cable to the USB port on the power pack
( ) and to the Micro-USB port on your terminal device (mobileOUT 1 5V/2.1A / OUT 2 5V/2.1A
phone, smartphone, etc.).
The Micro-USB charging/connecting cable included may not be suitable for the USB connection on
your terminal device. In this case, use the USB cable that was included with your terminal device.
To start charging, press the button of the wer ck. The status LEDs show the maining capacityPo Pa re
when the wer ck is charging.Po Pa
The current battery status of your terminal device will appear on this device.
Press the button of the wer ck to stop charging and to switch it off. The status LEDs shouldPo Pa
switch off.
The wer ck will automatically switch off if it is not connected to a terminal device.Po Pa
Warning – Connecting terminal devices
Before connecting a terminal device, check whether the power output of the charger can
supply sucient power for the device.
Ensure that the total power consumption of the connected terminal device does not exceed
2100 mA.
Please fer to the instructions in the operating manual of your terminal device.re
It is essential that you observe these specications and the safety instructions garding there
power supply of your devices.
The power pack must not be charged and discharged at the same time!


Produktspezifikationen

Marke: Hama
Kategorie: powerbank
Modell: Joy

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hama Joy benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung powerbank Hama

Bedienungsanleitung powerbank

Neueste Bedienungsanleitung für -Kategorien-