Haier HSU-18LTA18 Bedienungsanleitung

Haier Klimaanlage HSU-18LTA18

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Haier HSU-18LTA18 (8 Seiten) in der Kategorie Klimaanlage. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
Please read this operation manual before using the air conditioner.
Keep this operation manual for future reference.
SPLIT TYPE ROOM AIR CONDITIONER
OPERATION MANUAL
0010589123
Contents
1
2-4
5
7
6-7
CAUTIONS
PARTS AND FUNCTIONS
OPERATION
MAINTENANCE
TROUBLE SHOOTING
HSU-09LTF17
HSU-12LTF17
HSU-18LTF17
HSU-24LTF17
HSU-09LTA17/18
HSU-12LTA18
HSU-18LTA18
HSU-24LTA18
HSU-09CTFW
HSU-12CTFW
HSU-18CTFW
HSU-24CTFW
HSU-09LTE18
HSU-12LTE18
HSU-18LTE18
HSU-12TCS2CN
HSU-19TCS2CN
HSU-12TCR2CN
HSU-19TCR2CN
HSU-12TCB2CN
HSU-19TCB2CN
HSU-22TFW1CN
HSU-18TCS2CN
HSU-12LTR18
HSU-12TFW3CN
HSU-19TFW3CN
HSU-12TCS3CN
HSU-19TCS3CN
HSU-12TCR3CN
HSU-19TCR3CN
HSU-12TCB3CN
HSU-19TCB3CN
HSU-22TFW1CN
HSU-18TCR2CN
HSU-09LTR18
HSU-24LTR18
HSU-18LTR18
HSU-09LTK17
HSU-12LTK17
HSU-18LTK17
HSU-09LFA18
HSU-12LFA18
HSU-18LFA18
HSU-24LFA18
10.
12. SWING LEFT/RIGHT button
13.
15. SLEEP button
14. HEALTH button
16.
18. POWER ON/OFF button
20. TEMP button
21.
TIME OFF/ON 22.
1. Mode display
1
2
3
4
5
9
10
11
12
13
14
15
16
17
8
22
23
24
25
19
20
21
18
7
6
HEALTH SLEEP
TIME
OFF
TIME
ON
SWING
2. Signal sending display
4. FAN SPEED display
5. LOCK display
6. TIMER OFF display
TIMER ON display
7. TEMP display
3. SWING display
LO MED HI AUTO
Display
circulated
8.Additional functions display
9. TURBO/QUIET button
FAN button
11. COOL button
FAN SPEED button
LOCK button
Control the lightening and extinguishing
of the indoor LED display board.
17. LIGHT button
19. DRY button
button
SWING UP/DOWNbutton
23.HEALTH AIR FLOW button
24.CANCEL/CONFIRM button
Function: Setting and cancel to the
timer and other additional functions.
25. RESET button
When the remote controller appears
abnormal, use a sharp pointed
article to press this button to reset
the remote.
（Healthy function is not available
for some units.）
Loading of the battery
1
2
3
4
Remove the battery cover;
Load the batteries as illustrated.
2 R-03 batteries, resetting key
(cylinder);
Be sure that the loading
is in line with the" + "/"-";
Load the battery,then put on the cover again.
The distance between the signal transmission head and the rece-
iver hole should be within 7m without any obstacle as well.
When electronic-started type fluorescent lamp or change- over
wireless telephone is installed in the
ver is apt to be disturbed in receiving the signals,
so the distance to the indoor unit should be shorter.
type fluorescent lamp or
room, the recei
Note:
Full display or unclear display during operation indicates the
ries have been used up. Please change batteries.
If the remote controller can't run normally during operation, please
reload several minutes later.
batte
remove the batteries and
TURBO/QUIET
1
Parts and Functions
Remote controller
Indoor Unit
Outdoor Unit
4
OUTLET
INLET
CONNECTING PIPING
AND ELECTRICAL WIRING
DRAIN HOSE
4
Display board
(adjust left and
ow)
Vertical blade
r ight air fl
Air Purifying FilterInlet (inside)
Emergency
Switch
Horizontal flap
(adjust up and down air flow
Don't adjust it manually)
Outlet
Inlet grille
Actual inlet grille may vary from the one shown in the
manual according to the product purchased
Display board
4
2
3
1
Operation mode indicator
(lights up when the compressor is on.)
Timer mode indicator
(Lights up whenTimer operation is selected.)
Power indicator
(Lights up when unit starts.)
Remote signal receiver
(A beeping sound is generated when a signal from remote controller isreceived.)
Display board
2
3
Signal receiver
1
Setting temp.display
2
3
Operation mode indicator
1
Display board 1
4
2
3
1
5
Operation mode indicator
(lights up when the compressor is on.)
Timer mode indicator
(Lights up whenTimer operation is selected.)
Power indicator
(Lights up when unit starts.)
Ambient temp display
When receiving the remote control signal, display the set temperature.
Remote signal receiver
(A beeping sound is generated when a signal from remote controller isreceived.)
2 3 4 5
(Manual adjustment of some units)
Operation mode FAN
COOL DRY
Remote controller
Operation mode
Remote controller
QUIET TURBOSLEEP HEALTH
Healthy function is not available for some units.
Operation
Air Flow Direction Adjustment
Base Operation
Remote controller
Emergency operation and test operation
Emergency Operation:
Use this operation only when the remote controller is defective
or lost, and with function of emergency running, air conditoner
can run automatically for a while.
When the emergency operation switch is pressed, the " Pi "
sound is heard once, which means the start of this operation.
When power switch is turning on for the first time and
emergency operation starts, the unit will run automatically in
the following modes:
It is impossible to change the settings of temp. and fan speed,It
is also not possible to operate in timer or dry mode.
Pi
1
TURBO/QUIET
HEALTH SLEEP
TIMER
OFF
TIMER
ON
SWING
1
2
2
Press FAN button. For each press, fan speed
follows:
Remote controller:
Press button
Every time the button is pressed, temp.setting
increase 1oC,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1oC,if kept depressed, it will
decrease rapidly
Select a desired temperature.
4.Fan speed selection
3.Select temp.setting
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
/
2. Select operation mode
COOL button:Cooling mode
FAN button: Faning mode
DRY button: Dehumidify mode
Display
circulated
changes as
LOW MED HI AUTO
3
3
4
temperature is below 16 o
C, do not use it in the
Test operation:
Use this switch in the test operation when the room
normal operation.
your finger from the switch: the cooling
Continue to press the test operation
switch for more than 5 seconds. After
you hear the "Pi" sound twice, release
Test operation switch is the same as emergency switch.
operation starts with the air flow speed "Hi".
Under this operation mode,the fan motor of indoor
unit will run in high speed.
Pi Pi
Room
temperature
Designated
temperature
Timer
mode
Fan
speed
Operation
mode
Above 23oC 26oC AUTO COOL
No
When adjusting the flap by hand,turn off the unit.
It is advisable not to keep horizontal flap at downward
position for a long time in COOLor DRY
otherwise, condensate water might occur.
mode ,
Vertical flap
Pos.1
(Auto swing)
1.Status display of air flow
2.Left and right air flow adjustment
Pos.1 Pos.2 Pos.3 Pos.4
Pos.5 Pos.6
For each press of button, remote controller
displays as follows :
remote controller:
Cautions:
Initial state
Pos.2 No initial state disaplayed on remote controller, the
vertical flap will be fixed on the current position
2
Remote
Controller Note
In DRY mode, when room temperature becomes lower
than temp.setting+2
o
C, unit will run intermittently at LOW
speed regardless of FAN setting.
In FAN operation mode , the unit will not operate in COOL or
HEAT mode but only in FAN mode, AUTO is not available in
FAN mode. And temp. setting is disabled. In FAN mode,
sleep operation is not available.
Operation
Mode
DRY
COOL
FAN
When humidity is high,condensate water might occur
at air outlet if all vertical louvers are adjust to left or right.
In COOL mode, the AC unit will emit air
Cool according to the remote setting on the
temperature display
The unit will return to ambient temperature after
a moment ago.
1. Unit start
Press ON/OFF
on the remote controller,
unit starts.
Note In some model: The remote has the button ,But the :
AC doesn’t have the left and right air flow auto adjustment function.
in this condition, change the direction of vertical blades manually.

Produktspezifikationen

Marke: Haier
Kategorie: Klimaanlage
Modell: HSU-18LTA18

Brauchst du Hilfe?

Wenn Sie Hilfe mit Haier HSU-18LTA18 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Klimaanlage Haier

Haier

Haier AC48FS1ERA Bedienungsanleitung

8 Oktober 2024
Haier

Haier AU482FIERA(DC) Bedienungsanleitung

6 Oktober 2024
Haier

Haier AB48HC1ERA Bedienungsanleitung

5 Oktober 2024
Haier

Haier AS12GB2HRA Bedienungsanleitung

5 Oktober 2024
Haier

Haier HM-07C03 Bedienungsanleitung

4 Oktober 2024
Haier

Haier HWR06XC5 Bedienungsanleitung

2 Oktober 2024
Haier

Haier HPU-24H03/NAF Bedienungsanleitung

30 September 2024
Haier

Haier AP36KC1ERA Bedienungsanleitung

27 September 2024
Haier

Haier HBU-48HJ03 Bedienungsanleitung

19 September 2024
Haier

Haier Flexis AS82FFAHRA Bedienungsanleitung

17 September 2024

Bedienungsanleitung Klimaanlage

Neueste Bedienungsanleitung für -Kategorien-

MundoClima

MundoClima MUCSR-H3 Bedienungsanleitung

16 Oktober 2024
Duux

Duux DXMA10 North Bedienungsanleitung

16 Oktober 2024
Duux

Duux DXAC04 Bedienungsanleitung

16 Oktober 2024
LG

LG HS-H076QPA0 Bedienungsanleitung

16 Oktober 2024
Klarstein

Klarstein Vita Pure 2G Bedienungsanleitung

16 Oktober 2024
Einhell

Einhell BMK 2400E Bedienungsanleitung

15 Oktober 2024
Qlima

Qlima P 126 Bedienungsanleitung

15 Oktober 2024
Amana

Amana PTC093K35AXXX Bedienungsanleitung

15 Oktober 2024
Amana

Amana AMAP121AB-2 Bedienungsanleitung

15 Oktober 2024
Amana

Amana PTC173J35AXXX Bedienungsanleitung

15 Oktober 2024