Haier HSU-13VQA22 Bedienungsanleitung

Haier Klimaanlage HSU-13VQA22

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Haier HSU-13VQA22 (4 Seiten) in der Kategorie Klimaanlage. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

WARNING:

Use a cable of suitable length,Do not use tapped wires or an extension lead as this may cause

overheating, electric shocks, fire or explosion.

All the cables shall have got the local authentication certificate. During installation, when the

connecting cables break off, it must be assured that the grouding wire is the last one to be broken off.

If refrigerant gas leaks during installation, ventilate the area immediately.oxic gas may be produced

After completing installation, check for refrigerant gas leakage

When installing or relocating the air conditioner, be sure to bleed the refrigerant circuit to ensure

it is free of air, and use only the specified refrigerant (R32).

Make sure ground connection is correct and reliable.Do not earth the unit to a utility pipe, lightning

conductor or telephone earth lead. Imperfect earthing may result in electric shocks.

Be sure to install an earth leakage circuit explosion-proof breaker.

Do not use means to accelerate the defrosting process or to clean, other than those recommended by

the manufacturer.

The breaker of the air conditioner should be all-pole switch and explosion-proof. The distance

between its two contacts should not be no less than 3mm. Such means for disconnection must be

incorporated in the wiring.

Read the precautions in this manual

carefully before operating the unit. This appliance is filled with R32.

Ask your dealer or qualified personnel to carry out installation work.Do not attempt to install

the air conditioner yourself. Improper Installation may result in water leakage, electric shocks,

fire or explosion.

Keep this manual where the user can easily find it.

Install the air conditioner in accordance with the instructions in this installation manual

Be sure to use only the specified accessories and parts for installation work.

Install the air conditioner on a foundation strong enough to withstand the weight of the unit.

Electrical work must be performed in accordance with relevant local and national regulations

and with instructions in this installation manual,Be sure to use a dedicated power supply circuit

only. The wiring method should be in line with the local wiring standard.The type of connecting

wire is H07RN-F.

The appliance must be stored in a room without continuously operating ignition sources, the radius of

the storage area should be no less than 2.5 m (for example:open flames, an operating gas appliance

or an operating electric heater).

Do not pierce or burn.

Be aware that refrigerants may not contain an odour.

Comply with national gas regulations.

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the appliance.

Cleaning and user maintenance shall not be made by children.

The air conditioner can not be discarded or scrapped Randomly

Reusable mechanical connectors and flared joints are not allowed indoor.

If you need please contact

customer service personnel of Haier to scrap in order to obtain the correct disposal methods.

if the refrigerant comes into contact with fire,and explosion may be happen.

The appliance must be installed, operated and stored in a room with a floor area larger than 3m

The room should be well ventilated.

Read technical manual Operator’ manual operating instructions；

0011501394

Drawing for the installation of indoor and outdoor units

Optional parts for piping

Non-adhesive tape

Adhesive tape

Saddle (L.S) with screws

Connecting electric cable

for indoor and outdoor

Drain hose

Heating insulating material

Piping hole cover

The marks from to

in the gure are the

parts numbers.

The distance between

the indoor unit and the

oor should be more

than 2m.

Necessary Tools for Installation

Driver Torque wrench

(17mm,22mm,26mm)

Nipper

Reamer

Hacksaw Pipe cutter

Gas leakage detector or

soap-and-water solution

Hole core drill Flaring tool

Spanner(17,19 and 26mm) Knife

Measuring tape

Indoor Unit

Place, robust not causing vibration, where the body can be supported suf ciently.

Place, not affected by heat or steam generated in the vicinity, where inlet and outlet of the

unit are not disturbed.

Place, possible to drain easily, where piping can be connected with the outdoor unit.

Place, where cold air can be spread in a room entirely.

Place, nearby a power receptacle, with enough space around. (Refer to drawings).

Place where the distance of more than lm from televisions, radios, wireless apparatuses

and uorescent lamps can be left.

In the case of xing the remote controller on a wall, place where the indoor unit can

receive signals when the uorescent lamps in the room are lightened.

Outdoor Unit

Place, which is less affected by rain or direct sunlight and is suf ciently ventilated.

Place, possible to bear the unit, where vibration and noise are not increased.

Place, where discharged wind and noise do not cause a nuisance to the neighbors.

Place, where a distance marked is available as illustrated in the above gure.

Before inserting power plug into receptacle, check the voltage without fail.

The power source is the same as the corresponding name plate.

Install an exclusive branch circuit of the power.

A receptacle shall be set up in a distance where the power cable can be

reached.Do not extend the cable by cutting it.

Selection of Installation Place

Power Source

Arrangement of piping

directions

Rear left

Left Rear

right

Right

Below

Preparation

Please be subject to the actual product purchased ,

the above picture is just for your reference.

Read this manual before installation

Explain suf ciently the operating means to the user according to this manual

Installation Manual of Room Air Conditioner

No. Accessory parts

Remote controller

R-03 dry battery

Mounting plate

Number

articles

Accessory parts

Note:

Accessory parts may vary from each model,

pls refer to the actual parts.

Check Items for Test Run

Put check mark in boxes

Gas leak from pipe connecting?

Heat insulation of pipe connecting?

Are the connecting wirings of indoor and outdoor rmly

Is the connecting wiring of indoor and outdoor rmly xed?

Is drainage securely carried out?

Is the earth line securely connected?

Is the indoor unit securely xed?

Is power source voltage abided by the code?

Is there any noise?

Is the lamp normally lighting?

Are cooling and heating (when in heat pump) performed normally?

Is the operation of room temperature regulator normal?

Please kindly explain to our customers how to operate

through the instruction manual.

Check for Installation and Test Run

inserted to the terminal block?

Screw Plastic cap

4X25

Screw

4X12

more than

20cm

more than

20cm

more than 10cm

more than30cm

more than 60cm

PUTTY

POWER USED

Attention must

be paid to the

rising up of

drain hose

more than 30cm

more than 60cm

The models adopt HFC free refrigerant R32

H SU - 1 0 VTH 2 1 (0 3 ) / VTK2 1 HSU-19VTK21

HSU-19VTH21

H SU - 1 3 VTH 2 1 (0 3 ) / VTK2 1

HSU-09LPA03

HSU-10LPA03

HSU-13/19LPB21

HSU-13/19LPC21

HSU-13/19LPA21

HSU-10LPA21

HSU-10LPB21

HSU-10LPC 21

new-1P new-1.5P

440 203

148

HSU-10VXA21 HSU-13VQA22

HSU-13VQC22HSU-13VXA21

HSU-10XSV32

HSU-13XSV32

HSU-12TURBOCOOL(PA)

HSU-18TURBOAQUA

HSU-18UVCOOL(SMART)(INV)(PB)

HSU-18CAE(INV)

Drawing of pipe

C D

①

②③ ④

Inverter

Models

HSU-18UVC OOL( SMART )(INV)(P

2(L) 3(C)

2(L) 3(C)1(N)

1(N)

2(L) 3(C)1(N)

B )

HSU-12CLEANCOOL( INV)(TC)

HSU-12CAE(INV)

HSU-12ANTIRUST COOL( INV)(TH)

HSU-12ENERGYCOOL( INV)(TR)

HSU-18CLEANCOOL( INV)(TC)

HSU-18ANTIRUST COOL(INV)(TH)

HSU-18ENER GY COOL( INV)(TR)

HSU-18CAE(INV)

①

HSU-24CLEANCOOL( INV)(TC)

HSU-24ANTIRUST COOL( INV)(TH)

HSU-24ENER GY COOL( INV)(TR)

HSU-24CAE(INV)

HSU-24TURBOCOOL(PA )

①

elbac rewoP

3G1.5

3G2.5

Connect

wi re

4G1.5 4G2.5

HSU-18AQUACOOL(PC)

HSU-18TURBOAQUA

HSU-12TURBOCOOL(PA)

HSU-18TURBOCOOL(PA)

③

Power cable 3G1.5

3G2.5

Connect w ire 3G1.5 3G2.5

Non-Inverter

Models

Terminal

Models

Terminal

Models

Terminal

Models

Terminal

Models

Non-Inverter

③

Power cable 3G1.0 Terminal

Models

3G2.5 Terminal

Models

Connect wire

3G1.0 4G2.5

Models

HSU-25LPA21

HSU-10VTH21/VTK21

HSU-19VTH21/VTK21

HSU-25VTH21

HSU-25VQA22/VQB22/VQC22

HSU-10LPA21

HSU-13/19LPA21

HSU-13/19LPB21

HSU-13 LPA21-1

HSU-13 LPB21-1

HSU-10LPB21

HSU-10VQA22 /VQB22/VQC22

HSU-13VQA22/VQB22/VQC22

HSU-13VTH21/VTK21

③

①

②

-mod10/12

P(Q):A-502mm,B-261mm,C-184mm,D-113mm,E-43.4mm

(

HSU-12TURBOCOOL(PA)

)

-mod18

P(Q):A-550mm,B-281mm,C-195mm,D-128mm,E-41mm

( HSU-18AQUACOOL(PC)/HSU-18UVCOOL(SMART)(INV)(PB)/

HSU-18TURBOCOOL(PA))

-mod22-25

P: A-644mm,B-285mm,C-175mm,D-166mm,E-41mm

(

HSU-24TURBOCOOL(PA)

)

-mod10/13 X

:A-502mm,B-261mm,C-170mm,D-110mm,E-52mm

-mod12/15

T:A-500mm,B-261mm,C-175mm,D-107mm,E-42mm

(

HSU-12CLEANCOOL(INV)(TC)/HSU-12ANTIRUSTCOOL(INV)(TH)

/HSU-12ENERGYCOOL(INV)(TR) )

-mod18

T:A-548mm,B-283mm,C-170mm,D-126mm,E-55mm

( HSU-18CLEANCOOL(INV)(TC)/HSU-18ANTIRUSTCOOL(INV)(TH)

/HSU-18ENERGYCOOL(INV)(TR))

-mod22-24

T:A-644mm,B-285mm,C-175mm,D-166mm,E-41mm

( HSU-24CLEANCOOL(INV)(TC)/HSU-24ANTIRUSTCOOL(INV)(TH)

/HSU-24ENERGYCOOL(INV)(TR))

HSU-12CAE(INV)

0.6P

HSU-13LPA21-1

HSU-13LPB21-1

HSU-13LPC21-1

HSU-13VXA21

Inverter ①

①

Power cable 3G1.0 Terminal

Models

Terminal

Models

Connect wire G1.0

Models

HSU-10VXA21

①

HSU-10VQA22/VQB22/VQC22

HSU-13VQA22/VQB22/VQC22

HSU-19VQA22/VQB22/VQC22

HSU-09CPRA03 T

HSU- 12CP RA03T HSU- 18CP RA03T

HSU- 18CPR A03T

HSU- 09CPR A03T

HSU -12C PRA03T

HSU-18TurboCool(PA)

HSU-12TurboCool(NM)

HSU-24TurboCool(PA)

③

②

HSU-18TurboCool(PA)

HSU-24TurboCool(PA)

:A-500mm,B-251mm,C-195mm,D-98mm,E-35mm

HSU-18K(FIX)

HSU-12K(FIX)

500138 138

286

HSU-25VTH21

HSU-25LPA21

HSU-25VQA22

HSU-25VQC22

369

new-2P12

HSU-24TURBOCOOL(PA)

HSU-25VQA22/VQB22/VQC22

HSU-24K(FIX)

590 115

115

new-40

329

HSU-24CAE(INV)

490 165

165

new-2P20

329

HSU-25VQA22

HSU-25VQC22

6/6.35mm(1/4 )

9/9.52mm(3/8 ) 12/12.7mm(1/2 )

6/6.35mm(1/4 )

-mod09

P:A- 424.2mm,B-230mm,C-130mm,D-110mm,E-50mm

-mod12P

(

HSU-12TurboCool(NM)

)

Produktspezifikationen

Marke:	Haier
Kategorie:	Klimaanlage
Modell:	HSU-13VQA22

Brauchst du Hilfe?

Wenn Sie Hilfe mit Haier HSU-13VQA22 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Klimaanlage Haier

Haier AC48FS1ERA Bedienungsanleitung

8 Oktober 2024

Haier AU482FIERA(DC) Bedienungsanleitung

6 Oktober 2024

Haier AB48HC1ERA Bedienungsanleitung

5 Oktober 2024

Haier AS12GB2HRA Bedienungsanleitung

5 Oktober 2024

Haier HM-07C03 Bedienungsanleitung

4 Oktober 2024

Haier HWR06XC5 Bedienungsanleitung

2 Oktober 2024

Haier HPU-24H03/NAF Bedienungsanleitung

30 September 2024

Haier AP36KC1ERA Bedienungsanleitung

27 September 2024

Haier HBU-48HJ03 Bedienungsanleitung

19 September 2024

Haier Flexis AS82FFAHRA Bedienungsanleitung

17 September 2024

Bedienungsanleitung Klimaanlage

Neueste Bedienungsanleitung für -Kategorien-

MundoClima MUCSR-H3 Bedienungsanleitung

16 Oktober 2024

Duux DXMA10 North Bedienungsanleitung

16 Oktober 2024

Duux DXAC04 Bedienungsanleitung

16 Oktober 2024

LG HS-H076QPA0 Bedienungsanleitung

16 Oktober 2024

Klarstein Vita Pure 2G Bedienungsanleitung

16 Oktober 2024

Einhell BMK 2400E Bedienungsanleitung

15 Oktober 2024

Qlima P 126 Bedienungsanleitung

15 Oktober 2024

Amana PTC093K35AXXX Bedienungsanleitung

15 Oktober 2024

Amana AMAP121AB-2 Bedienungsanleitung

15 Oktober 2024

Amana PTC173J35AXXX Bedienungsanleitung

15 Oktober 2024