Gorenje ECT 68 Bedienungsanleitung

Gorenje Ofen ECT 68

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gorenje ECT 68 (14 Seiten) in der Kategorie Ofen. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/14
Instructions for use, mounting and connection 31
Built-in ceramic-glass cooktop GB IE MT
Dear customer !
The built-in ceramic-glass cooktop is intended for
household use only.
Materials used for packaging are nature friendly
and may be recycled, deposited or destroyed
without any threats to the environment.
In order to recognize these features, all packing
materials are marked with relevant symbols.
Once your appliance has become obsolete and
you do not intend to use it any longer, take
adequate care not to litter the environment.
Deposit your old appliance with the authorized
depot dealing with used household appliances.
Instructions for use
Instructions for use have been prepared for the
user, and describe the particulars and handling of
the appliance. These instructions apply to
different models from the same family of
appliances, therefore you may find information
and descriptions that may not apply to your
particular appliance.
Installation instructions
The appliance should be connected to the power
supply in accordance with the instructions from
the chapter "Electrical connections" and in line
with the standing regulations and standards.
The connections should be carried out by a
qualified personnel only.
Rating plate
The rating plate with basic information is located
underneath the appliance.
Fire hazard protection
Appliances are allowed to be mounted on one
side next to a high kitchen cabinet, the height of
which may exceed that of the appliance. On the
opposite side however, only a kitchen cabinet of
equal height as the appliance is allowed.
Built-in ceramic-glass cooktop..................... 31
Important warnings ...................................... 32
Connection to the power supply .................. 32
Basic adjustment of sensors to the ambience
Installation diagram
Mounting the built-in cooktop ..................... 33
Caution !
Dimensions of the built-in hob opening
Installation procedure
Ceramic-glass cooktop.................................. 34
Cookware ....................................................... 35
Energy saving tips
Glass ceramic hob control elements............. 36
Control panel
Control elements
Automatic cooking mode
Blocking the hob operation
Timer function
Limited time of operation
Safety functions and error display
Cleaning and maintenance of ceramic-glass
hob .................................................................. 43
Technical information................................... 44
Instructions for use, mounting and connection
32
Important warnings
xThe appliance may be built-in and connected to the
power supply only by a qualified technician.
xParticular areas of the cooktop surface (adjacent to
the hotplates) are hot during operation. Prevent the
children to hang around the appliance and warn them
properly against the danger of burns.
xHot oil ignites readily, so be sure have the
preparation of such food (fries) under constant
control.
xHotplates may not be left in operation empty, without
any dishes on top.
xNever use the appliance for heating the ambience.
xNever use the ceramic-glass cooktop as a working
surface. Sharp objects may damage the cooktop
surface.
xPreparation of food in aluminum or plastic cookware
is not allowed. Never place any plastic objects or
aluminum foil upon the cooktop surface.
xIn case any other appliances are plugged in the
electric mains close to the cooktop, prevent the
contact of the plug cable with the hot cooking zones.
xNever keep any flammable or temperature sensitive
objects, like cleaning agents, sprays, detergents, etc.,
below the appliance.
xNever use cracked or broken ceramic-glass cooktop.
In case you notice any visible cracks on the surface,
cut the power supply immediately.
xIn case of any malfunctions, disconnect the appliance
from the power supply and call service department.
xDo not use high-pressure steam cleaner or hot
steam to clean the appliance.
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead it
shall be handed over to the applicable collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed
of correctly, you will help prevent potential
negative consequences for the environment and
human health, which could otherwise be caused
by inappropriate waste handling of thisproduct.
For more detailed information about recycling of
this product, please contact your local city office,
your household waste disposal service or the shop
where you purchased the product.
Connection to the power supply
xConnections may be carried out by a qualified
technician only. The earthing protection must comply
with the standing regulations.
xConnection terminals are revealed when the
connection box cover is removed.
xPrior any attempted connection check that the
voltage indicated on the rating plate is in line with your
home power supply.
xThe rating plate is located underneath the appliance.
xThe appliance is manufactured for use with the
power supply voltage AC 230 V.
xThe electric wiring should be equipped with a circuit
breaker able to isolate the appliance from the mains
in all points, with the distance between terminals of at
least 3 mm in open position. This may be done by
means of fuses, safety switches, etc.
xThe connection should be selected in accordance
with the declared charge capacity of the mains and
the fuse power.
xSuch appliances are allowed to be mounted on one
side next to a high kitchen cabinet, the height of
which may exceed that of the appliance. On the
opposite side however, only a kitchen cabinet of
equal height as the appliance is allowed.
xUpon the completion of installation, live wires and
isolated cables must be adequately protected against
accidental touching.
xDistance between the cooktop surface and the
cooking hood must be such as indicated in the
instructions for use of the hood.
x Kitchen cabinets may not be mounted underneath
the built-in ceramic-glass cooktop.
Basic adjustment of sensors to the
ambience
Upon each connection to the power supply the
sensors of the appliance are automatically
adjusted to the environment to ensure their
proper function. All displays indicate the sign "-".
Once the successful adjustment is completed it is
signaled with a beep, all displays are switched off
and your cooktop is ready for use. During the
adjustment procedure the sensors must be free
of any objects, otherwise the adjustment
procedure will be interrupted until such objects
are removed from the sensor surface. During this
period the regulation of the cooktop is impossible.
ATTENTION !
Before attempting any repairs on the appliance,
disconnect the power supply. In accordance with
the mains voltage the appliance should be
connected in line with the attached diagram. The
earthing wire (PE) must be connected to the
terminal marked with the earthing symbol .
The connection cable must lead through the relief
safety device, protecting it from accidental pulling
out. Upon the completion of installation switch all
the hotplates on for about 3 minutes to check the
proper functioning.
Instructions for use, mounting and connection 33
Installation diagram
NOTE: In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the
others they are stored at a designated place within the box. These boxes have the connection screws
already in open position so they need not be unscrewed. During the tightening procedure you will hear a
faint “click”, meaning that the tightening screw should be fastened tightly all the way
Connection may be carried out by means of:
rubber coated connection cables, model H05 RR-F 4x1,5 with yellow-green earthing cable;
PVC insulated connection cables, model H05 VV-F 4x1,5 with yellow-green earthing cable; or
any other suitable cables.
Mounting the built-in cooktop
Caution !
x To avoid any possible hazard, the appliance
may be installed by qualified personnel only.
x Panels and furniture lining of the kitchen
cabinet receiving the hob must be treated with
temperature resistant adhesives (100°C),
otherwise they might be discoloured or
deformed because of inadequate temperature
resistance.
x The cooking hob is intended for building into the
worktop above the kitchen element of 600 mm
width or more.
x After the installation of built-in hob make sure
that there is free access to the two fixing
elements in front.
x Suspended kitchen elements above the
cooktop must be installed at such distance to
provide enough room for comfortable working
process.
x The distance between the worktop and the
hood must be at least such as indicated in the
instructions for installation of the kitchen hood,
but in no case it may be less than 650 mm.
x The smallest distance between the edge of the
appliance and the adjacent high kitchen
cabinet is 40 mm.
x The use of hard wood decorative borders
around the worktop behind the appliance is
allowed, in case the minimum distance remains
as indicated on the installation illustrations.
x Minimum distance between the built-in cooktop
and rear wall is indicated at the illustration for
the installation of the built-in cooktop.
x The appliance may be installed in any worktop
with a thickness from 30 mm to 50 mm.


Produktspezifikationen

Marke: Gorenje
Kategorie: Ofen
Modell: ECT 68

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gorenje ECT 68 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ofen Gorenje

Bedienungsanleitung Ofen

Neueste Bedienungsanleitung für -Kategorien-