Godex DT4L Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Godex DT4L (40 Seiten) in der Kategorie Etikettendrucker. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
DT SERIES USER MANUAL
USER MANUAL
VERSION
ISSUE DATE
P/N
: DT series
: Rev. G.3
: 2020.03.06
: 920-014211- 00
DT series User Manual
FCC COMPLIANCE STATEMENT
FOR AMERICAN USERS
This equipment has been tested and found to comply with the limits for a CLASS A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at own expense.
EMS AND EMI COMPLIANCE STATEMENT
FOR EUROPEAN USERS
This equipment has been tested and passed with the requirements relating to
electromagnetic compatibility based on the standards EN55022:2010 Class A,
EN61000-3-2:006/A2:2009, EN61000-3-3:2008 and EN55024:1998/A1:2001/A2:2003, IEC
61000-4-2:2008 series, The equipment also tested and passed in accordance with the
European Standard EN55022 for the both Radiated and Conducted emissions limits.
DT SERIES
TO WHICH THIS DECLARATION RELATES
IS IN CONFORMITY WITH THE FOLLOWING STANDARDS
IEC 60950-1:2005(2nd Edition)+Am 1:2009, GB9254-2008 (Class A ) ; GB17625. 1-2003;
GB4943.1-2011, EN55022:2010 Class A, EN61000-3-2:006/A2:2009, EN61000-3-3:2008 and
EN55024:1998/A1:2001/A2:2003, IEC 61000-4-2:2008 series, UL 60950-1,2nd
Edtion,2007- -27, UL 60950-1,1st Edition,2007- -31, CSA C22.2 No.60950-1-07,2nd 03 10
Edition, 2007-03, CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07, CFR 47, Part 15
WARNING
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
此为 产品,在生活环境中,该产品可能造成无线电干扰,在这种情况下Class A
可能需要用户对其干扰采取切实可行的措施。
DT series User Manual
Safety instructions
Please read the following instructions carefully.
1. Keep the equipment away from humidity.
2. Before you connect the equipment to the power outlet, please check the voltage of the
power source.
3. Make sure the printer is off before plugging the power connector into the power jack.
4. It is recommended that you connect the printer to a surge protector to prevent possible
transient overvoltage damage.
5. Be careful not to get liquid on the equipment to avoid electrical shock.
6. For safety and warranty reasons, ONLY qualified service personnel should open the
equipment.
7. Do not repair or adjust energized equipment under any circumstances.
CAUTION
Danger of explosion if battery is incorrectly replaced
Replace only with the equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Only use with power supply adapter model: WDS060240P (9A).
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Specifications are subject to change without notice.

Produktspezifikationen

Marke: Godex
Kategorie: Etikettendrucker
Modell: DT4L
USB Anschluss: Ja
WLAN: Nein
Breite: 168 mm
Tiefe: 218 mm
Gewicht: 1440 g
Steuerung: Tasten
Übertragungstechnik: Kabelgebunden
Höhe: 166 mm
AC Eingangsspannung: 100 - 240 V
AC Eingangsfrequenz: 50 - 60 Hz
Anzahl USB 2.0 Anschlüsse: 1
Display: Nein
Farbe: Nein
RS-232 port: 1
Maximale Auflösung: 203 x 203 DPI
Druckgeschwindigkeit: 7 lpm
Eingebauter Prozessor: Ja
Vertikaler Druck: Ja
Flash-Speicher: 8 MB
Drucktechnologie: Direkt Wärme
Druckgeschwindigkeit (metrisch): 177 mm/sek
Maximale Druckgröße: 108 x 1727 mm
Seitenbeschreibungssprachen: EZPL, GDPL, GEPL, GZPL
Druckfarben: Schwarz
Maximum Druckweite: 54 mm
integrierte Barcodes: 1D, 2D, Code 11, Code 39, Code 49, Code 93, Code-128 Codabar Library, EAN128, GS1 DataBar, Industrial 2/5, Interleaved 2/5, UPC-A, UPC-E
Optionale Konnektivität: Ethernet, Serial (RS-232), USB 2.0
Mindestdrucklänge: 4 mm
Maximum Druckerhöhe: 1727 mm
Gedrehtes Drucken: Ja
Textausrichtung: Center, Justify
Textstil: Bold, Horizontal lines, Italic, Normal
Ethernet/LAN: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Godex DT4L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten