Glemm CSL 308 Bedienungsanleitung

Glemm Speaker CSL 308

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Glemm CSL 308 (1 Seiten) in der Kategorie Speaker. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
20.1
Di󰀨usore acustico operante a 100V e destinato ad impianti di lodi󰀨usione.
L’alta qualità dei componenti utilizzati per la sua realizzazione garantisce
un’ottima resa acustica.
L’installazione di questo prodotto deve essere e󰀨ettuata esclusivamente da
tecnici specializzati, competenti di impanti elettrici e di sonorizzazione.
In caso di installazione o collegamenti errati il produttore non si assume
alcuna responsabilità per danni a persone o cose.
Riferitevi alla gura sottostante per il corretto collegamento dei
cavi. Prima di procedere con l’installazione assicuratevi che
l’amplicatore sia spento. Durante il funzionamento sui morsetti
di collegamento è presente una tensione a 100V che potrebbe
essere pericolosa.
Conservate il manuale di istruzioni per utilizzi futuri. Utilizzate la sta󰀨a in
dotazione per il corretto posizionamento a parete o so󰀩tto.
Collegamento
Questo di󰀨usore opera a tensione costante ed è idoneo quindi al
collegamento ad impianti 100V. Abbiate cura di collegare il morsetto nero del
di󰀨usore alla presa “COM” dell’amplicatore, mentre il morsetto rosso del
di󰀨usore andrà connesso alla presa 100V dell’amplicatore.
Nel caso dobbiate collegare più di󰀨usori, dopo aver vericato la potenza
totale, potrete connetterli all’amplicatore con un collegamento in “parallelo”
(g.1).
Ricordatevi di valutare la corretta sezione dei cavi da utilizzare in relazione
alla distanza dei di󰀨usori dall’amplicatore.
Considerate correttamente la potenza dei di󰀨usori e
dell’amplicatore al quale sono collegati: la somma
della potenza dei di󰀨usori non deve superare la potenza
dell’amplicatore.
Conformità, garanzia e assistenza
II marchio CE indica che il prodotto è conforme ai requisiti essenziali delle
direttive europee e relative norme ad esso applicabili.
Il prodotto è coperto da garanzia in base alle vigenti normative nazionali ed
Europee.
Per le condizioni complete di garanzia e per e󰀨ettuare richieste di assistenza
visitate il sito internet: www.glemm.eu
Vi suggeriamo anche di procedere alla registrazione del prodotto, loggandovi
nell’area riservata del sito. Avrete così la possibilità di ricevere aggiornamenti
e informazioni sui nostri articoli.
Audio speaker operating 100V and intended for PA SYSTEM. The high
quality of the components used for its construction guarantees an excellent
acoustic performance.
The installation of this product must be carried out exclusively by specialized
technicians, skilled in electric and audio systems.
In case of wrong installation or connections, the manufacturer doesn’t take
any responsibility for damages to people or objects.
Refer to the below picture for correct cable connection. Before
starting the installation, make sure that the amplier is o󰀨.
During operation on the connection terminals there is a tension
of 100V, which could be dangerous.
Keep the instruction manual for future reference. Use the included bracket for
correct wall or ceiling placement.
Connection
This speaker operates with constant tension and is therefore suitable for
connection to 100V systems. Make sure to connect the speaker’s black
terminal to the “COM” socket of the amplier, while the speaker’s red terminal
is to be connected to the 100V socket of the amplier.
If you need to connect more than one speaker, after checking the total power,
you can connect them to the amplier with a “parallel” connection (g.1).
Remember to consider the correct section of the cables, according to the
distance of the speakers from the amplier.
Consider carefully the power of the speakers and of the
amplier to which they are connected: the total power of the
speakers must not exceed the amplier’s power.
Compliance, warranty and service
The CE brand indicates that the product complies with the essential
requirements of the applicable European directives and related standards.
The product is covered by warranty according to current national and
European regulations.
For complete warranty conditions and for technical service requests visit the
website: www.glemm.eu
We also suggest to register your product, by logging into the website’s
private area. In this way you will have the possibility to receive updates and
information on our items.
Caratteristiche tecniche / Technical specications
Potenza Massima / RMS
Max power/ RMS power
12W / 6W RMS
Altoparlante / Speaker Woofer 4”
Impedenza / Impedance
Tensione / voltage
---
100V
Risposta in frequenza
Frequency response
18 Hz - 18 KHz
Sensibilità
Sensitivity
92 dB
Foro da incasso / Mounting hole 12,5 cm
Dimensioni / Dimensions 150 x 150 x 100 mm (l x h x p)
Peso / Weight 0,76 Kg
PRODOTTO DA / PRODUCED BY:
KARMA ITALIANA Srl
Via Gozzano 38/bis
21052 Busto Arsizio (VA)
www.karmaitaliana.it
Lo smaltimento del prodotto deve
essere e󰀨ettuato conferendolo
ad un apposito centro di raccolta
di󰀨erenziata (Dir. 2012/19/UE).
www.glemm.eu
The manufacturer, in order to improve its products, reserves the right to modify the characteristics
whether technical or aesthetic, at any time and without notice.
Il fabbricante, allo scopo di migliorare i propri prodotti, si riserva il diritto di modicarne le
caratteristiche siano esse tecniche o estetiche, in qualsiasi momento e senza alcun preavviso.
g.1
Esempio: Casse = 41W Ampli = 100W
Example: Speakers = 41W Ampli = 100W
OK !
com
100V
15W 10W 10W 6W
154 - Made in P.R.C.
ABS
WHITE
VOLT
100
W
12
MAGNETIC
GRID

Produktspezifikationen

Marke: Glemm
Kategorie: Speaker
Modell: CSL 308

Brauchst du Hilfe?

Wenn Sie Hilfe mit Glemm CSL 308 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Speaker Glemm

Bedienungsanleitung Speaker

Neueste Bedienungsanleitung für -Kategorien-