Gigaset C610A TRIO Bedienungsanleitung

Gigaset Telefon C610A TRIO

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gigaset C610A TRIO (1 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

G IGASET HELPLINE: 0845 0318190

Quick Start Guide

Pack contents

If you have purchased a model

with multiple handsets the

package should contain two bat-

teries, a battery cover, a belt clip

and a charging cradle 9 with

mains adapter J for each addi-

tional handset.

34 5

1one Gigaset C610A base

2one mains adapter

3one Gigaset C610H handset

4one phone cord

5two batteries

6one battery cover

7one belt clip

8one user guide

plus one quick start guide

9 J

Connecting the base station

¤First connect

the mains

adapter 1.

¤Then connect

the telephone

jack 2 and

insert the

cables into the

cable ducts.

Please note:

uThe mains

adapter must always be connected, as the phone will not operate without a

mains connection.

uOnly use the mains adapter and phone cord supplied. Pin connections on tele-

phone cables can vary.

uThe LED display should light up at the base station. If not, please

ensure the power lead is fully inserted.

Connecting the charging cradle (if included)

¤Plug the mains adapter into the plug

socket 2.

¤Connect the flat plug from the mains

adapter 1.

If you need to disconnect the plug from the charg-

ing cradle, press the release button 3 and discon-

nect the plug 4.

Final check list

To ensure your product is set up correctly please check the

following

uHave you used phone cord supplied 

uHave you fully inserted the power cable into base station 

uHave you inserted batteries correctly 

uHave you charged the batteries for 10 hours 

uHave you set up Date/Time 

PLEASE NOTE:

For a dial tone press the call button c for approx. 2 seconds. Short press opens

redial list.

Message Indication Key f on handset will flash to indica

te one or all of the following

events:

umissed calls (if caller ID is enabled for your line numbers will be shown)

unew messages on the answering machine (also indicated by flashing message

counter on base station)

unew Text messages (SMS) received

If you have problems setting up or operation this product please call

GIGASET HELPLINE

0845 0318190

Issued by

Gigaset Communications GmbH

Frankenstr. 2a. D-46395 Bocholt

Rights of modification reserved.

www.gigaset.com

A31008-M2325-L101-2-7643

Preparing the handset

Initial charging and discharging of the batteries

The correct charge level can only be displayed if the batteries are first fully charged

and discharged.

¤Insert the batteries the right

way round.

The polarity is indicated in/on

the battery compartment.

¤First insert the battery cover at

the top a.

¤Then press the cover b until it

clicks into place.

If you need to open the battery cover, for

instance to replace the batteries, place

your fingertip in the cavity on the casing

and pull the battery cover upwards.

¤Place the handset in the base/charging cradle for

10 hours.

¤Then remove the handset

from the base/charging cradle

and do not replace it until the

batteries are fully discharged.

10 h

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming

calls, and so that the alarm can be used.

Date/Time

Date:

14.10.2009

Time:

00:00

Date/Time

Date:

31.01.2011

Time:

00:00

¤Press the key below §Time§ on the

screen display to open the input

field.

The Date/Time submenu is shown on

the display.

¤The active input position flashes.

Enter day, month and year as an

8-digit number via the keypad,

e.g.  4 Q

2Q

for 14/10/2011.

Calls Time

Press the right or left control key to

change the input position and cor-

rect an entry.

¤Enter the hours and minutes as

four digit numbers via the keypad,

e.g. QM5 for 07:15 am.

Change the input position with

the control key if necessary.

¤Press down on the control key to switch to the

time input field.

Setting the date and time

Display in idle status

uReception signal between the base and handset:

– good to poor: Ð i Ñ Ò

– no reception: | flashes

Green: Eco Mode activated

uÃ: answering machine is activated

uBattery charge status:

–yy {{ (empty to full)

–y flashes red: batteries almost empty

–xyx{x{(charging)

uINT 1: Internal name of the handset

If Eco Mode+ is activated, the ¼ icon is displayed in

the top left (see chapter “ECO DECT” of user manual.

¤Press the key below §Save§ on the display

screen to confirm your entry.

The display shows Saved. You will hear a con-

firmation tone and the handset will automat-

ically return to idle status.

Back Save

Date/Time

Saved

i Ã ¤V

07:15

INT 1 14 Oct

Calls SMS

Frequently asked questions

Q: There is no dial tone.

A: Press call button for 2 seconds (long press) to obtain dial tone. A short press opens

the redial list.

Q: The line is crackling / not clear.

A: Have you used the new line cable provided? Please do not use an old cable.

Q: Message indicator flashing on handset and I cannot retrieve my message.

A: Message indicator will flash to indicate missed call as well as new message or text

message.

Please check it is not indicating a new missed call or text message.

Q: The caller ID is not functioning.

A: Have you subscribed to this service (CLIP) from your provider?

Q: Can I record my own announcement on the answer machine.

A: Yes. Please refer to Chapter

“Operating the answer machine of the Gigaset C610A base station”

of your user manual (p. 47).

Q: The display is not clear.

A: The display is protected by a plastic film, please make sure you have removed the

protective film.

Q: The handset is not registered.

A: If your handset is not registered, please refer to Chapter “Registering handsets”

of your user manual (p. 55) to instructions how to register handsets manually.

For more QUESTIONS AND ANSWERS please refer to chapter “Service (Customer

Care)” of user manual (p. 69).

Version: 21.06.2013

Produktspezifikationen

Marke:	Gigaset
Kategorie:	Telefon
Modell:	C610A TRIO
Bildschirmdiagonale:	1.8 Zoll
Anzahl der Farben des Displays:	65536 Farben
Freisprecheinrichtung:	Ja
SMS (Kurznachrichtendienst):	Ja
Anrufer-Identifikation:	Nein
Wecker:	Ja
Ladegerät:	Ja
Produktfarbe:	Schwarz
Akku-/Batterietyp:	AAA
Befestigungstyp:	Wand
Eingebautes Display:	Ja
Gleichstrom-Anschluss (DC):	Ja
Lautstärkeregler:	Digital
Schnellstartübersicht:	Ja
Mikrofon Stummschaltung:	Ja
Telefonbuch Kapazität:	150 Eintragungen
Anrufbeantworter:	Ja
Anklopfen:	Ja
Anruf halten:	Ja
Anrufumleitung:	Ja
Wahlwiederholung:	Ja
Display:	TFT
Typ:	DECT-Telefon
Plug & Play:	Ja
Anzahl Melodien:	21
Abmessungen des Mobilteils (BxTxH):	49 x 27.5 x 149 mm
Anzahl enthaltener Handsets:	3
Basisstation:	Ja
Gesprächszeit:	12 h
Bereitschaftszeit:	180 h
Anzahl unterstützter Akkus/Batterien:	2
VIP Gruppenfunktion:	Ja
VIP-Gruppe mit eigener Melodie:	Ja
Rufnummernübermittlung (CLIP):	Ja
Batterieladeanzeige:	Ja
Textzeilen:	6 Zeilen
Ladestandsanzeige (voll):	Ja
Warnanzeige bei geringem Ladestand:	Ja
Klingeltontyp:	MP3
Farbe der Hintergrundbeleuchtung:	Bernstein
Drahtlose Verbindung:	Ja
Uhr mit Kalender:	Ja
Anrufblockierung:	Ja
Anruftimer:	Ja
Seniorentelefon:	Nein
Dialerposition:	Mobilteil
Anruferlisten:	30
Umfang der Wahlwiederholungsliste:	20
Navigation Taste:	Ja
Multi-Function Hörer:	6
Maximum Innenabstand:	50 m
Maximum Außenabstand:	300 m
Beleuchtete Tasten:	Ja
Aufnahmezeit:	45 min
Abmessungen Basis:	118 x 136 x 45 mm
Downloadbare Klingeltöne:	Nein
LED auf Basisstation:	Ja
Kontakte über das Mobilteil hinzufügen:	Ja
Durchwahl:	Ja
Anzahl der SMS-Mailboxen:	4
Display-Auflösung:	128 x 160 Pixel