Gigaset C360 Bedienungsanleitung

Gigaset Schnurlose DECT-Telefone C360

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gigaset C360 (9 Seiten) in der Kategorie Schnurlose DECT-Telefone. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/9

Athens A260 (C360) / India / A31008-M1801-Z701-1-7619 / Athen_en_A260_C360.fm / 10.11.2008

Gigaset C360

Safety precautions

11.12. 11:56

INT MENU

1 Charge status of the

battery pack

2 Internal number

of the handset

3Display keys

4Message key

5 Handsfree key

6 Control key

7 Talk key

8Directory key

9 End call and

On/Off key

10 Ringtone on/off (press

and hold in idle status)

11 Key lock on/off

(press and hold)

12 Recall key

- Confer (flash)

- Dialling pause

(press and hold)

13 Microphone

14 Alarm clock key

Base station

Display keys:

Pressing the keys launches whichever function

that appears above them in the display.

Display

icon

Function when pressed

INT Call all registered handsets.

MENU Open main/submenu

(see Menu tree, page 9).

“ Go back one menu level.

UScroll up/down or adjust volume

with u.

T Move cursor to left/right with u.

˜Backspace deletes one character at

a time.

OK Confirm menu function or save

entry.

Registration/Paging

key (page 6/page 6

Handset for C36H

WRead the user guide and the safety precautions

carefully before use. Explain their contents to your

children, and the potential hazards associated

with using the telephone.

Only use the mains unit supplied.

Fit only the approved rechargeable battery

pack! Never use a conventional (non-recharge-

able) battery pack as this could damage your

health and cause injury. Use the battery pack as

directed in this user guide (page 2).

The operation of medical appliances may be

affected. Be aware of the technical conditions

within the particular environment (e.g. doctor's

practice).

Do not hold the rear of the handset to your ear

when it is ringing or when the handsfree func-

tion is activated. This can cause severe, perma-

nent hearing damage.

The handset may cause an unpleasant hum-

ming noise in hearing aids.

Do not install the phone in a bathroom or

shower room. The handset and base station

are not splashproof.

Do not use the telephone in environments

subject to explosion hazard (e.g. auto paint

shops).

If you give your Gigaset to someone else,

make sure you also give them the user guide.

Athens A260 (C360) / India / A31008-M1801-Z701-1-7619 / Athen_en_A260_C360.fm / 10.11.2008

Emergency numbers cannot be dialled if the key lock

(page 1) is activated!

Not all of the functions described in this user guide are

available in all countries.

Setting up the telephone for use

Step 1: Connecting the base station

First connect the mains unit (230 V) to power

cord 1 and then connect the phone jack to phone

cord 2, as shown above. Place the cords in the cord

recesses. The two cords must be plugged in at all

times.

◆Only use the mains unit supplied.

◆If you ever purchase another phone cord from

a store, ensure that the phone conductors are

correctly connected: 3-4 connection of the tele-

phone conductors.

Step 2: Setting up the handset

Fitting the battery pack

◆Insert the plug into the socket as shown in the

enlarged view.

◆Insert the battery pack.

◆Place the cords in the cord routing.

Closing the battery cover

Insert the cover into the top end of the battery

compartment and press down until it clicks into

place.

Opening the battery cover

Place your fingernail between the cover and the

housing and pull the cover upwards.

All electrical and electronic equipment should

not be disposed of separately from general

household waste using the sites designated by

local authorities.

The appropriate disposal and separate collec-

tion of used equipment serve to prevent poten-

tial harm to the environment and to health.

They are a precondition for the re-use and recy-

cling of used electrical and electronic equip-

ment.

For further information on disposing of your

used equipment, please contact your local

authority, your refuse collection service or the

dealer you purchased the product from.

Note:

The display is protected by a plastic film.

Please remove the protective film!

◆Place the battery leads in the cable guides so

that the battery cover cannot catch on the leads

and damage them when it is closed.

◆Use only the rechargeable battery pack rec-

ommended by Gigaset Communications GmbH *

(page 8), i.e. never use a conventional (non-

rechargeable) battery pack as this may cause sig-

nificant damage to health and property. For

example, the outer casing of the battery pack

could be destroyed or the battery pack could

explode. The phone could also malfunction or be

damaged as a result of using batteries that are not

of the recommended type.

◆Only use the battery charger supplied.

◆Only place the handset in the charging cradle

that is intended for it.

* Gigaset Communications GmbH is a trademark

licensee of Siemens AG.

Athens A260 (C360) / India / A31008-M1801-Z701-1-7619 / Athen_en_A260_C360.fm / 10.11.2008

Step 3: Registering the handset to

the base station and charging the

battery pack

Precondition: The handset is not already regis-

tered to a base station.

Registering the handset to the Gigaset C360 base

station occurs automatically. Place the handset in

the charging cradle of the base station with its dis-

play facing forward. You will hear a confirmation

tone. Leave the handset in the base station until it

is registered.

Automatic registration can take up to 5 minutes.

While this is happening, Registering flashes in the

screen. The handset is assigned the lowest unas-

signed internal number (1–4). If several handsets

are registered to the base station, the internal

number is shown in the top left of the display after

registration, e.g. 2. If the internal numbers 1 to 4

have already been assigned (four handsets have

already been registered), handset number four is

de-registered and overwritten.

Charging the battery pack

To charge the battery pack, leave the handset in

the base station for approx. 13 hours. The battery

pack is now fully charged. The charge status of the

battery pack is correctly displayed only after unin-

terrupted charging/discharging. Therefore you

should not interrupt the charging procedure.

Charging is electronically controlled to prevent the

battery pack from overcharging. The battery pack

heats up during charging. This is normal and not

dangerous. After a time its charge capacity will

decrease for technical reasons.

You must set the date and time to ensure that the

times of calls are logged correctly (see Menu tree,

page 9).

Once the phone is registered and the time set, the

idle display looks as shown on page 1.

Making calls

Making external calls and ending a call

External calls are calls using the public telephone

network.

~ (Enter the phone number) ¢c.

The number is dialled. (Or you can first press and

hold c [dial tone] and then enter the number.)

During the call you can adjust the earpiece volume

using u.

End the call/cancel dialling:

Press the end call key a.

Answering a call

An incoming call is indicated by ringing, by a flash-

ing handsfree key d and a display on the screen.

You can answer the call by:

◆Pressing the talk key c.

◆Press the handsfree key d.

When Auto Answer is activated (see Menu tree,

page 9), simply remove the handset from the base

station/charging cradle.

Displaying the caller's phone number

When you get a call, the caller's phone number will

be displayed on your handset; or the caller's name

will be displayed if it is stored in the directory or if

CNIP has been requested.

Requirements:

1 You have asked your network provider for the

caller's phone number (CLIP) or name (CNIP) to

be displayed on your handset screen.

2 The caller has asked the network provider for

his phone number to be identified (CLI).

® appears in the display if you have not

requested Calling Line Identification, Withheld

appears if the caller has withheld CLI, and Unavail-

able if CLI has not been requested by the caller.

Handsfree talking

Once you have entered the phone number you can

immediately call in handsfree mode by pressing d

(the d key lights up continuously). During a call

you can switch between earpiece and handsfree

mode by pressing d. Set the handsfree volume

with u.

Produktspezifikationen

Marke:	Gigaset
Kategorie:	Schnurlose DECT-Telefone
Modell:	C360

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gigaset C360 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Schnurlose DECT-Telefone Gigaset

Gigaset AL170A Bedienungsanleitung

7 Juli 2024

Gigaset A185 Bedienungsanleitung

6 Juli 2024

Gigaset A125 Bedienungsanleitung

6 Juli 2024

Gigaset CE575A Bedienungsanleitung

6 Juli 2024

Gigaset A39H Bedienungsanleitung

6 Juli 2024

Gigaset A1000 Bedienungsanleitung

6 Juli 2024

Gigaset A520A Bedienungsanleitung

5 Juli 2024

Gigaset A690IP Bedienungsanleitung

5 Juli 2024

Gigaset Gigaset C530A IP Bedienungsanleitung

4 Juli 2024

Gigaset CL750H Sculpture Bedienungsanleitung

4 Juli 2024

Bedienungsanleitung Schnurlose DECT-Telefone

Neueste Bedienungsanleitung für -Kategorien-

Tiptel 205 PLUS Bedienungsanleitung

5 Oktober 2024

KPN Atlanta 100 HS+BS Bedienungsanleitung

5 Oktober 2024

Motorola CD4012 Bedienungsanleitung

5 Oktober 2024

Tiptel 240 Bedienungsanleitung

18 September 2024

Premier Maxima 500 Bedienungsanleitung

16 September 2024

Premier Moonlight 200 Bedienungsanleitung

16 September 2024

Alcatel F380-S Draadloze DECT telefoons Bedienungsanleitung

10 September 2024

Alcatel Origin Draadloze DECT telefoons Bedienungsanleitung

10 September 2024

Alcatel F530 Draadloze DECT telefoons Bedienungsanleitung

9 September 2024

Alcatel Vision Draadloze DECT telefoons Bedienungsanleitung

9 September 2024