Gigabyte GV-R736OC-2GD Bedienungsanleitung

Gigabyte Grafikkarte GV-R736OC-2GD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gigabyte GV-R736OC-2GD (15 Seiten) in der Kategorie Grafikkarte. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/15
AMD® Graphics Accelerator
Users Manual
Rev. 104
Copyright
© 2012 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. (“GBT”). No part of this manual may be reproduced or trans-
mitted in any form without the expressed, written permission of .GBT
Trademarks
Third-party brands and names are the properties of their respective owners.
Notice
Please do not remove any labels on this graphics card. Doing so may void the warranty of this card.
Due to rapid change in technology, some of the speci cations might be out of date before publication of this this
manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor
does the author make a commitment to update the information contained herein.
Rovi Product Notice:
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering
or disassembly is prohibited.
- 3 - Introduction
1. Introduction
1.1. Minimum System Requirements
Hardware
- Intel®Pentium®4 / CoreTM 2 or AMD AthlonTM / PhenomTM
- 1 GB or more of system memory for best performance
- Optical drive for software installation (CD-ROM or DVD-ROM drive)
Operating System
- Windows ® 8
- Windows ® 7
- Windows ®
Vista
- Windows®
XP with Service Pack 2 (SP2)
- Windows ®
XP Professional x64 Edition
- 4 -AMD Series Graphics Accelerator
2.2. Hardware Installation
Step 3.
Plug the display cable into your card; then turn on the computer and monitor. To connect a at panel display
to your graphics card, use the DVI-I connector. To connect an HDMI monitor to your graphics card, use the
HDMI connector. To connect a DisplayPort monitor to your graphics card, use the DisplayPort connector.
Step 1.
Locate the PCI Express x16 slot. If necessary, remove the metal
cover from this slot; then align your graphics card with the PCI
Express x16 slot, and press it in firmly until the card is fully
seated.
Step 2.
Replace the screw to fasten the card in place, and replace the
computer cover.
Make sure that the gold edge connector of the graphics card is
securely inserted.
After installation, remember to connect the power cable to your graphics card, or the system
will not boot. Do not touch the card when it’s operating to prevent system instability.
You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for
detailed instructions.
To Flat Panel Display To Flat Panel Display To HDMI Monitor
To D-sub Monitor
To Mini HDMI Monitor
To Mini DisplayPort Monitor To Mini DisplayPort Monitor


Produktspezifikationen

Marke: Gigabyte
Kategorie: Grafikkarte
Modell: GV-R736OC-2GD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gigabyte GV-R736OC-2GD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Grafikkarte Gigabyte

Bedienungsanleitung Grafikkarte

Neueste Bedienungsanleitung für -Kategorien-