Gigabyte GA-N3160N-D3V Bedienungsanleitung
Gigabyte
Hauptplatine
GA-N3160N-D3V
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gigabyte GA-N3160N-D3V (4 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
GA-N3160N-D3V
User's Manual
Rev. 1001
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the environment.
- 3 -
Table of Contents
GA-N3160N-D3V Motherboard Layout 4 ............................................................................
Chapter 1 Hardware Installation 5 .....................................................................................
1-1 Installation Precautions 5 ....................................................................................
1-2 ProductSpecications ...................................................................................... 6
1-3 Installing the Memory 8 .......................................................................................
1-4 Installing an Expansion Card 8 ...........................................................................
1-5 Back Panel Connectors 8 ....................................................................................
1-6 Internal Connectors 10 ........................................................................................
Chapter 2 BIOS Setup 15 ..................................................................................................
2-1 Main ............................................................................................................... 16
2-2 Advanced ....................................................................................................... 17
2-3 Security .......................................................................................................... 21
2-4 Boot ................................................................................................................ 22
2-5 Save & Exit 24 .....................................................................................................
Chapter 3 Appendix 25 ......................................................................................................
Drivers Installation 25 .....................................................................................................
Regulatory Statements 26 ..............................................................................................
Contact Us 28 ................................................................................................................
- 12 -
5) SATA3 0/1/2/3 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device.
Pin No. Deîš¿nition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
7 7
1 1
0 1
2 3
SATA3
6) F_PANEL (Front Panel Header)
Connect the power switch, reset switch, and system status indicator on the chassis to this header according
to the pin assignments below. Note the positive and negative pins before connecting the cables.
•PW (Power Switch, Red):
 Connectstothepowerswitchonthechassisfrontpanel.Youmaycongurethe
way to turn off your system using the power switch (refer to Chapter 2, "BIOS
Setup," "Chipset," for more information).
•HD (Hard Drive Activity LED, Blue):
Connects to the hard drive activity LED on the chassis front panel. The LED is
on when the hard drive is reading or writing data.
•RES (Reset Switch, Green):
Connects to the reset switch on the chassis front panel. Press the reset switch
to restart the computer if the computer freezes and fails to perform a normal
restart.
•NC (Purple): No connection.
•PLED (Power LED, Yellow):
System Status LED
S0 On
S3/S4/S5 Off
Connects to the power status indicator on the chassis
front panel. The LED is on when the system is
operating. The LED is off when the system is in S3/
S4 sleep state or powered off (S5).
The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch,
power LED, hard drive activity LED and etc. When connecting your chassis front panel module to this header,
make sure the wire assignments and the pin assignments are matched correctly.
1
2
9
10
NC
PLED-
PW-
PLED+
PW+
HD-
RES+
HD+
RES-
Power Switch
Hard Drive
Activity LED
Reset Switch
Power LED
Produktspezifikationen
| Marke: | Gigabyte |
| Kategorie: | Hauptplatine |
| Modell: | GA-N3160N-D3V |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Gigabyte GA-N3160N-D3V benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Gigabyte
7 Oktober 2024
5 Oktober 2024
24 September 2024
17 September 2024
16 September 2024
15 September 2024
13 September 2024
11 September 2024
10 September 2024
9 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine Supermicro
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
22 September 2024
22 September 2024
19 September 2024
17 September 2024