Gigabyte GA-8S655FX-L Bedienungsanleitung
Gigabyte
Hauptplatine
GA-8S655FX-L
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gigabyte GA-8S655FX-L (41 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/41
SiS 964 S-ATA User’s Manual
Quick User’s Guide
Version 0 1.
Serial ATA RAID Quick User’s Guide
CONTENTS
Introduction.............................................................................................1
Step 0. What is RAID..............................................................................3
KNOW HOW......................................................................................3
PERFORMANCE HINTS AND RECOMMEND SETTING ............3
Step 1. Hardware Setup ..........................................................................5
HARD DRIVES SETUP......................................................................5
Step 2. Installing Software Drivers.........................................................8
WINDOWS 2000/XP...........................................................................8
NEW WINDOWS 2000/XP INSTALLATION.............................................. 8
EXISTING WINDOWS 2000/XP INSTALLATION ..................................... 9
CONFIRMING WINDOWS 2000/XP DRIVER INSTALLATION................ 9
Step 3. BIOS Utility Operation (for RAID only)..................................10
CREATING AN ARRAY FOR PERFORMANCE..........................11
CREATING A MIRROR ARRAY...................................................13
CREATING A JBOD ARRAY .........................................................16
CREATING A STRIPE-MIRROR ARRAY ....................................18
Step 4. SIS 964 22 RAID Utility Operation...............................................
VIEWING THE “CREATE RAID” .................................................24
CREATE A RAID SET.....................................................................26
VIEWING THE RAIDTYPE MEANING........................................33
DELETE A RAID SET .....................................................................35
RAID RECOVERY OPERATION...................................................38
Serial ATA RAID Quick User’s Guide
1
Introduction
The 964 S-ATA controller is a hybrid solution that combines two
independent SATA ports and one Ultra ATA port for support of up to two
Serial ATA (Serial ATA RAID) and two Ultra ATA (Ultra ATA RAID) drives.
Specifications are as follows:
Serial ATA Interface
Serial ATA (SATA) is the latest generation of the ATA interface. SATA hard
drives deliver blistering transfer speeds of up to 150MB/sec. Serial ATA
uses long, thin cables, making it easier to connect your drive and improving
the airflow inside your PC.
♦ Supports 150 MB/s transfers with CRC error checking
♦ Large LBA support for drives over 137 GB
♦ Data handling optimizations including tagged command queuing, elevator seek
and packet chain command
Ultra ATA Interface
♦ Standard ATA/IDE interface
♦ Supports Ultra ATA/133, Ultra ATA/100, and Ultra ATA/66 drives
♦ Supports CRC error checking for Ultra ATA drives
♦ Separate timing control for two devices attached to one ATA channel
Serial/Ultra ATA RAID Interfaces
The Serial/Ultra ATA RAID is designed to provide a cost-effective, high
performance RAID solution that adds performance and/or reliability to PC
desktops and/or servers using Serial ATA/150, Ultra ATA/133, Ultra
ATA/100, Ultra ATA/66 hard disks.
Serial/Ultra ATA RAID function supports striping (RAID 0), mirroring (RAID
1), striping + mirroring (RAID 0+1) and span (JBOD). Please note that the
function supports hard disk drives only.
With striping, identical drives can read and write data in parallel to increase
performance. Mirroring increases read performance through load balancing
and elevator sorting while creating a complete backup of your files. Span
would increase the logic hard disk space.
Serial/Ultra ATA RAID striped arrays can double the sustained data transfer
rate of Serial ATA/150 and Ultra ATA/133 drives. Serial/Ultra ATA RAID
fully supports Serial ATA/150 and Ultra ATA/133 specification of up to
150MB/sec per drive, depending on individual drive specifications.
Produktspezifikationen
| Marke: | Gigabyte |
| Kategorie: | Hauptplatine |
| Modell: | GA-8S655FX-L |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Gigabyte GA-8S655FX-L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Gigabyte
7 Oktober 2024
5 Oktober 2024
24 September 2024
17 September 2024
16 September 2024
15 September 2024
13 September 2024
11 September 2024
10 September 2024
9 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine Supermicro
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
22 September 2024
22 September 2024
19 September 2024
17 September 2024