Gigabyte GA-8KNXP Bedienungsanleitung
Gigabyte
Hauptplatine
GA-8KNXP
Lesen Sie kostenlos die ๐ deutsche Bedienungsanleitung fรผr Gigabyte GA-8KNXP (112 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war fรผr 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/112
When you installing AGP card, please make sure the following notice
is fully understood and practiced. If your AGP card has "AGP 4X/8X
(1.5V) notch"(show below), please make sure your AGP card is AGP
4X/8X.
Caution: AGP 2X card is not supported by Intelยฎ 845(GE/PE) / 845(E/G) /
850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system
unable to boot up normally. Please insert an AGP Pro 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode
by adjusting the jumper. The factory default for this card is 2X(3.3V).
The GA-8KNXP / GA-8I875 Ultra (or any AGP Pro 4X/8X only) motherboards
might not function properly, if you install this card without switching the jumper
to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X(3.3V) / 4X(1.5V) mode AGP slot, but they support
2X(3.3V) only. The GA-8KNXP / GA-8I875 Ultra (or any AGP Pro 4X/8X only)
motherboards might not function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel ยฎ 845(GE/PE) /
845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.
Before you install PCI cards, please remove the Dual BIOS label from PCI
slots if there is one.
AGP 4X/8X notch
The author assumes no responsibility for any errors or
omissions that may appear in this document nor does the
author make a commitment to update the information
contained herein.
Third-party brands and names are the property of their
respective owners.
Please do not remove any labels on motherboard, this may
void the warranty of this motherboard.
Due to rapid change in technology, some of the
specifications might be out of date before publication of
this booklet.
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Trรคding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-8KNXP / GA-8I875 Ultra
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
๎๎๎๎
๎ EN 55011 Limits and methods of measurement
of radio disturbance characteristics of
industrial,scientific and medical (ISM
high frequency equipment
๎๎๎๎
๎ EN 61000-3-2*
7777
7 EN 60555-2
Disturbances in supply systems cause
by household appliances and similar
electrical equipment โHarmonicsโ
๎๎๎๎
๎ EN 55013 Limits and methods of measurement
of radio disturbance characteristics of
broadcast receivers and associated
equipment
๎๎
๎๎
๎ EN 61000-3-3* Disturbances in supply systems cause
by household appliances and similar
electrical equipment โVoltage fluctuationsโ
๎๎๎๎
๎ EN 55014 Limits and methods of measurement
of radio disturbance characteristics of
household electrical appliances,
portable tools and similar electrical
apparatus
7777
7 EN 50081-1 Generic emission standard Part 1:
Residual commercial and light industry
77
77
7 EN 50082-1 Generic immunity standard Part 1:
Residual commercial and light industry
๎๎๎๎
๎ EN 55015 Limits and methods of measurement
of radio disturbance characteristics of
fluorescent lamps and luminaries
Generic emission standard Part 2:
Industrial environment
๎๎๎๎
๎ EN 55081-2
Immunity from radio interference of
broadcast receivers and associated
equipment
Generic emission standard Part 2:
Industrial environment
๎๎
๎๎
๎ EN 55082-2
77
77
7 EN 55022 Limits and methods of measurement
of radio disturbance characteristics of
information technology equipment
lmmunity requirements for household
appliances tools and similar apparatus
๎๎
๎๎
๎ ENV 55104
Cabled distribution systems; Equipment
for receiving and/or distribution from
sound and television signals
EMC requirements for uninterruptible
power systems (UPS)
๎๎๎๎
๎ EN50091-2
๎๎
๎๎
๎ EN 55020
๎๎๎๎
๎ DIN VDE 0855
๎๎๎๎
๎ part 10
๎๎
๎๎
๎ part 12
(EC conformity marking)
7777
7 CE marking
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
Safety requirements for mains operated
electronic and related apparatus for
household and similar general use
๎๎
๎๎
๎ EN 60950
๎๎๎๎
๎ EN 60065
Safety of household and similar
electrical appliances
๎๎๎๎
๎ EN 60335
Manufacturer/Importer
Signature:
Name:
(Stamp) Date : August 20, 2003
7777
7 EN 60555-3
Timmy Huang
Timmy Huang
๎๎๎๎
๎ EN 50091-1
Safety for information technology equipment
including electrical bussiness equipment
General and Safety requirements for
uninterruptible power systems (UPS)
Produktspezifikationen
| Marke: | Gigabyte |
| Kategorie: | Hauptplatine |
| Modell: | GA-8KNXP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Gigabyte GA-8KNXP benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Gigabyte
7 Oktober 2024
5 Oktober 2024
24 September 2024
17 September 2024
16 September 2024
15 September 2024
13 September 2024
11 September 2024
10 September 2024
9 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine Supermicro
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung fรผr -Kategorien-
15 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
22 September 2024
22 September 2024
19 September 2024
17 September 2024