GE ZGU48L6DWSS Bedienungsanleitung

GE Herde ZGU48L6DWSS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für GE ZGU48L6DWSS (12 Seiten) in der Kategorie Herde. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/12
GE Monogram®
Installation
Instructions
Professional
Gas Cooktops
48" Natural Gas Models
ZGU48N4G
ZGU48N6R
ZGU48N6D
48" LP Gas Models
ZGU48L4G
ZGU48L6R
ZGU48L6D
36" Natural Gas Models
ZGU36N6
ZGU36N4R
ZGU36N4D
36" LP Gas Models
ZGU36L6
ZGU36L4R
ZGU36L4D
2
Before you begin—Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be sure to leave these instructions with the Consumer.
NOTE TO CONSUMER: Keep these instructions with your Owner’s Manual for future reference.
This appliance must be properly grounded. See “Electrical Supply”, page 6.
CAUTION
WARNING
For Monogram local service in your area,
1-800-444-1845.
For Monogram Service in Canada,
Call 1-888-880-3030.
For Monogram Parts and Accessories, call
1-800-626-2002.
If you received a damaged cooktop, you
should contact your dealer.
Proper installation is the responsibility of the
installer. Product failure due to improper
installation is not covered under the GE
Appliance Warranty. See the Owner’s Manual
for details.
CAUTION:
THESE COOKTOPS SHOULD BE
INSTALLED IN CONJUNCTION WITH A
SUITABLE OVERHEAD VENT HOOD. Due
to the high heat capacity of this unit, particu-
lar attention should be paid to the hood and
duct work installation to assure it meets local
building codes.
Standard countertop and island installations:
A 1200 CFM Hood is recommended for 48"
cooktops.
A 600 CFM hood is recommended for 36"
cooktops.
Hoods should be 24" min. deep and the same
width as the cooktop.
Island installations:
Check local building codes for the proper
method of cooktop installation. Local codes
vary. Installation, electrical connections and
grounding must comply with applicable codes.
In the absence of local codes, the cooktop
should be installed in accordance with the
National Fuel Gas Code ANSI 223.1-1990 and
National Electrical Code ANSI/NFPA 70-1990.
CAUTION:
These cooktops are extremely heavy. Due to
the weight and size of the cooktop and to
reduce the risk of personal injury or damage
to the product, TWO PEOPLE ARE
REQUIRED FOR PROPER INSTALLATION.
Contents Design Information
Models Available.................................................................................................................................. 3
Accessory Requirements ..................................................................................................................... 3
Product Dimensions and Clearances ................................................................................................. 4
Installation Options ............................................................................................................................ 5
Advance Planning ............................................................................................................................... 5
Installation Preparation
Tools & Materials Required ................................................................................................................ 6
Power Supply Locations ...................................................................................................................... 6
Installation
Step 1: Remove Packaging .................................................................................................................. 7
Step 2: Cut the Countertop Opening ................................................................................................ 7
Step 3: Install the Cooktop ................................................................................................................. 8
Step 4: Conect Cooktop to Gas .......................................................................................................... 8
Step 5: Install the Cooktop Backguard .............................................................................................. 8
Step 6: Connect Electrical .................................................................................................................. 9
Step 7: Assemble Burners, Check Ignition ........................................................................................ 9
Adjustable Low Burner Settings .......................................................................................... 10
Finalize Installation ........................................................................................................................... 10
3
Design Information
Professional Gas Cooktops
These cooktops are factory set for either
natural gas or liquid propane gas. Order the
model for your installation situation.
48" Natural Gas Models:
ZGU48N4G
4 gas burners, grill and griddle
ZGU48N6R
6 gas burners and grill
ZGU48N6D
6 gas burners and griddle
48" Liquid Propane Gas Models:
ZGU48L4G
4 gas burners, grill and griddle
ZGU48L6R
6 gas burners and grill
ZGU48L6D
6 gas burners and griddle
Models
Available
36" Natural Gas Models:
ZGU36N4D
4 gas burners and griddle
ZGU36N4R
4 gas burners and grill
ZGU36N6
6 gas burners
36" Liquid Propane Gas Models:
ZGU36L4D
4 gas burners and griddle
ZGU36L4R
4 gas burners and grill
ZGU36L6
6 gas burners
All models require the installation of a
backguard or trim. A backguard/trim should be
ordered at the same time as the cooktop. Both should
be on site at the time of installation.
48" backguards, order one:
ZXC1B48
1/2" trim backguard (required for island installations
or installations where back wall is non-combustible;
such as brick, ceramic tile, marble, etc).
ZXC12B48
12" high backguard
ZXC22B48
22" high backguard with warming shelf (2 piece)
36" backguards, order one:
ZXC1B36
1/2" trim backguard (required for island installations
or installations where back wall is non-combustible;
such as brick, ceramic tile, marble, etc).
ZXC12B36
12" high backguard
ZXC22B36
22" high backguard with warming shelf (2 piece)
Accessory
Requirements 22" High Backguard With
Warming Shelf
1/2" Trim
12" High Backguard
Installation Note:
For approved installations to non-combustible back wall materials, consult
material representative to ensure that the material has appropriate resistance
to staining and/or discoloration.

Produktspezifikationen

Marke: GE
Kategorie: Herde
Modell: ZGU48L6DWSS

Brauchst du Hilfe?

Wenn Sie Hilfe mit GE ZGU48L6DWSS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Herde GE

GE

GE Profile PLD621DWBB Bedienungsanleitung

27 Juni 2024
GE

GE Profile PLD621EWSB Bedienungsanleitung

27 Juni 2024
GE

GE GRF400SVWW Bedienungsanleitung

27 Juni 2024
GE

GE GGS500PVSS Bedienungsanleitung

27 Juni 2024
GE

GE Profile PLD621RWSS Bedienungsanleitung

27 Juni 2024
GE

GE GRF500PVES Bedienungsanleitung

27 Juni 2024
GE

GE GGF600AVSS Bedienungsanleitung

27 Juni 2024
GE

GE GRF500PVWW Bedienungsanleitung

27 Juni 2024
GE

GE GGS600AVES Bedienungsanleitung

27 Juni 2024
GE

GE GGF600AVES Bedienungsanleitung

27 Juni 2024

Bedienungsanleitung Herde

Neueste Bedienungsanleitung für -Kategorien-

Nemco

Nemco 9130A Bedienungsanleitung

18 August 2024
Meireles

Meireles MI 1600 Bedienungsanleitung

12 August 2024
BEKO

BEKO HIGG 64123 SB Bedienungsanleitung

5 August 2024
NABO

NABO KFC 6060 Bedienungsanleitung

28 Juni 2024
NABO

NABO KFI 6010 Bedienungsanleitung

28 Juni 2024
NABO

NABO KFC 3000 Bedienungsanleitung

28 Juni 2024
NABO

NABO HS 4062 Bedienungsanleitung

28 Juni 2024
AEG

AEG TI64IB10IZ Bedienungsanleitung

27 Juni 2024
BORA

BORA M Pure Bedienungsanleitung

27 Juni 2024
BORA

BORA Basic Bedienungsanleitung

27 Juni 2024