GE Profile JB940WBWW Bedienungsanleitung

GE Herde Profile JB940WBWW

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für GE Profile JB940WBWW (12 Seiten) in der Kategorie Herde. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

Skill Level: High Average Low

Completion Time: 1 to 3 Hours

Proper installation is the responsibility of the installer. Product failure due to improper installation

is not covered under the GE Appliance Warranty. See the Owners Manual for warranty

information.

CAUTION: Before you begin

Read these instructions carefully and

completely.

• IMPORTANT- Save these instructions for

local inspector’s use.

• IMPORTANT- Observe all governing codes

and ordinances.

Self Cleaning Free-Standing

Electric Range

Installation

Instructions EER2000, EER3000 JBP24, JBP26, JBP30, JBP35, JBP48, JBP64, JBP65,

JBP66, JBP67, JBP70, JBP78, JBP79, JBP85, JB940, JB960, JB965

• NOTE TO INSTALLER- Be sure to leave

these instructions with the consumer.

• OWNER- Keep these instructions for future

reference.

• WARNING- This appliance must be

properly grounded.

Parts Included

Tools You Will Need

Pub. No. 31-10463

229C4053P447-3 1

“If you have questions, Call 800-GE-CARES or visit our website at:

www.GEAppliances.com”

1/4”Nut

driver

Adjustable wrench

Pencil

Materials Needed

Lag Bolts Anchor Sleeves

4- Wire Cord

4’long

3 -Wire Cord

4’long

(For Concrete Floors Only)

( UL Approved 40 AMP)

Drill with

1/8” Bit

Anti-Tip Bracket and leg leveler

Safety

Glasses Tape Measure

Level 5/16” Hex Head

Nut driver

Phillips

Screwdriver

Flat-Bladed

Screwdriver

All rough-in and spacing dimensions must be met

for safe use of your range. Electricity to the range

can be disconnected at the outlet without moving

the range if the outlet is in the preferred location

(remove lower drawer).

To reduce the risk of burns or fire when reaching

over hot surface elements, cabinet storage space

above the cooktop should be avoided. If cabinet

storage space is to be provided above the

cooktop, the risk can be reduced by installing a

range hood that sticks out at least 5 beyond the”

front of the cabinets. Cabinets installed above a

cooktop must be no deeper than 13”.

Be sure your appliance is properly installed and

grounded by a qualified technician.

Make sure the cabinets and wall coverings around

the range can withstand the temperatures (up to

200 F.) generated by the range.°

WARNING: For personal safety

remove house fuse or open circuit

breaker before beginning

installation. Failure to do so could result in

serious injury or even death.

For Your Safety

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of

tipping, the appliance must be

secured by properly installed anti-tip

bracket packed with the appliance.

If you pull the range out and away from the wall

for any reason, make sure the Anti-Tip bracket

is engaged when the range is pushed back

against the wall.

WARNING

• All ranges can tip

• Injury to persons could result

• Install anti-tip bracket

packed with range

• See Installation Instructions

Installation Instructions

Pre- Installation Checklist

Preparing the Range

Open oven door and remove literature

pack, broiler pan and grid, and oven racks.

Remove packaging materials. Any

packaging materials must be removed

during installation. This will include

adhesive tape, wire ties, cardboard and

protective plastic. Failure to remove

these materials could result in damage to

the appliance once the appliance has

been turned on and surfaces have

heated.

Push the hinge locks

down toward the door

frame, to the unlocked

position. This may

require a flat blade

screwdriver.

Open the oven door as

far as it will go.

Remove Installation Instructions

from literature pack and read it

carefully before you begin. Be

sure to place all literature, Use

and Care, Installation

Instruction, etc. in a safe place

for future reference.

Close the oven door to

the broil stop position.

Place hands on both

sides of the door. As you

close the door, lift up and

away from the range.

Lift door up until the

hinges clear the slots.

DO NOT LIFT THE DOOR BY THE HANDLE!

NOTE: The oven door is very heavy. Be sure you

have a firm grip before lifting the oven door off the

hinges. Use caution once the door is removed. Do

not lay the door on its handle. This could cause

dents or scratches.

Hinge

Unlocked

Position

Hinge

Slot

Hinge

Arm

Hinge

Clears

Slot

EASY INSTA LLATION OF YOUR NEW

30" WALL OVEN

Bef ore yo u begin-R ea d thes e instr uctions complet ely and ca ref ully.

IMPORTA NT- Save these instruc tions for local inspe ctor 's use.

IMPORTA NT- OBSER VE ALL GO VERN ING CO DES AN D O RD IANC ES.

Note to Insta ller- B e sure to leave thes e instr uctions with the cons umer.

OWN ER- Kee p thes e instr uctions for fut ure re fer ence .

Note - This ap pliance mus t be prop erly grou nded (if applicable) .

Bef ore yo u begin-R ea d thes e

instruc tions c omplete ly and

care fully.

IMPORTA NT- Save these

instruc tions f or local inspe ctor 's use.

IMPORTA NT- OBSER VE ALL

GOVERN ING COD ES AND OR DIAN CES.

Note to Insta ller- B e sure to leave

thes e instr uctions with the consu mer.

OWN ER- Kee p thes e instr uctions

for fut ure re fer ence .

Note - This ap pliance mus t be

proper ly grounde d (if applica ble).

FOR YOU R SA FETY