GE GPF475 Bedienungsanleitung
GE
SpĆ¼lmaschine
GPF475
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r GE GPF475 (8 Seiten) in der Kategorie SpĆ¼lmaschine. Dieser Bedienungsanleitung war fĆ¼r 49 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT ā Save these instruc-
tions for local inspectorās use.
IMPORTANT ā Observe all governing
codes and ordinances.
Note to Installer ā Be sure to leave these
instructions with the Consumer.
Note to Consumer ā Keep these instructions
with your Ownerās Manual for future
reference.
Installation
Instructions
3/4" Custom Dishwasher
Door and Access Panel Kit
GPF475 Kit
WARNING:
To prevent electric shock, disconnect
electrical power supply to dishwasher before
changing panels. Do not operate dishwasher
while changing panels or when lower access
panel assembly is removed.
TOOLS AND MATERIALS REQUIRED:
ā¢ 1/4" socket driver
ā¢ Phillips screwdriver
ā¢ Electric drill
ā¢ 1/8" and 3/16" drill bits
ā¢ Carpenters square
ā¢ Safety Glasses
The custom panels should be constructed in
the same manner as cabinet doors. Cut edges
can be seen and must be finished for the best
appearance.
The GPF475 Trim Kit provides for the installa-
tion of 3/4" thick custom door and access
panels with a typical 4" high toekick.
KIT INCLUDES:
ā¢ Door panel support
ā¢ 7, 5/8" phillips flat head screws
ā¢ 3 round head screws
ā¢ GPF100 spring kit
STOP
1 CUT 3/4" THICK CUSTOM
PANELS TO SIZE
CAUTION:
Verify door panel height before cutting the
custom panel. Measure from the bottom of the
escutcheon to the bottom of the door. Some
models require shorter door panels.
ā¢ Cut the 3/4" thick door panel to the
dimensions shown. (19-13/16" or 19-3/8"H x
23-5/8"W.)
ā¢ Rout the bottom edge of the door panel on
the appearance side, 1/2" deep and 1-9/16"
high resulting in 1/4" thickness. See
illustration.
CAUTION:
Some models require 19-3/8" panel height.
Measure before cutting the panel.
Note:
The custom wood
access panel should
evenly match the
bottom of adjacent
cabinets. Adjustments
made to the leveling
legs to obtain correct
height can affect the
vertical dimension
(height) of the access
panel.
19-13/16"
23-5/8"
3/4" Thick Panel
Appearance Side
1-9/16"
3/4"
1/2"
2 REMOVE LOWER ACCESS
PANEL ASSEMBLY
ā¢ Remove the two screws below the access
panel. Retain screws.
ā¢ Loosen the two screws located between the
door and the access panel. Do not attempt
to remove these screws. They are secured
to the access panel with washers.
ā¢ Remove the access panel assembly and
toekick from the dishwasher. Set aside.
NOTE: Do not remove the insulation behind
the access panel
or toekick.
3 MOUNT CUSTOM PANEL TO
METAL SUPPORT PANEL
A
ā¢ Place the metal door panel support on the
custom panel, with the projecting tabs
overlapping and against the bottom edge.
Center the support panel by matching the
center line to the diamond cutout.
NOTE: Do not remove tape from adhesive
strips.
ā¢ Lay the custom panel on a flat surface with
appearance side down.
ā¢ Measure and mark the center line. Use a
carpenters square to draw the center line.
C
ā¢ Remove the custom panel from the support.
ā¢ Remove tape from adhesive strips on the
metal support ā on the side that touches the
custom panel.
ā¢ Carefully, position the metal support onto the
custom panel with center line showing
through the diamond. Press the metal sup-
port against the panel.
B
1 CUT 3/4" THICK CUSTOM
PANELS TO SIZE (CONTINUED)
2
ā¢ The access panel height may be 3-3/4" to
4-1/4" max. The access panel height can vary
depending upon toekick height and adjust-
ments made to the leveling legs.
*3-3/4" min., 4-1/4" max. for typical 4" toekicks.
Adjustments may be required to match adjacent cabinet
fronts.
A*
23-5/8"
3/4" Thick Access Panel
Loosen 2 Screws
Escutcheon
Door
Panel
Access Panel
Toekick
Foam
Double Sided
Tape
Tab
Tabs
Overlap
Bottom
Edge
Metal Support
Overlaps
Top
Edge
Remove
Tape Covering
Adhesive Strips
ā¢ Drill 1/8" dia. pilot holes, 5/8" deep through
support holes.
ā¢ Install 4 flathead screws through the support
and into the panel.
CAUTION:
Do not drill pilot holes too deeply to avoid
damaging the appearance side of the panel.
E
ā¢ Remove tape from adhesive strips on the back
side of the metal support.
ā¢ Carefully, mount the panel onto the dish-
washer by tipping the protruding metal at the
top under and up against the escutcheon.
D
3 MOUNT CUSTOM PANEL TO
METAL SUPPORT PANEL
(CONTINUED)
F
ā¢ Secure the panel to the door by installing 3
round head screws into the bottom of the
metal support and into the dishwasher door.
Install center screw first, then left and right
screws.
ā¢ Press the custom panel against the
dishwasher door.
3
Drill 4 Holes,
In Locations Shown
Custom Panel
Install 3 Round
Head Screws
Produktspezifikationen
Marke: | GE |
Kategorie: | SpĆ¼lmaschine |
Modell: | GPF475 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit GE GPF475 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung SpĆ¼lmaschine GE
24 MƤrz 2024
15 MƤrz 2024
13 MƤrz 2024
10 Februar 2024
8 Dezember 2023
4 November 2022
Bedienungsanleitung SpĆ¼lmaschine
- SpĆ¼lmaschine Samsung
- SpĆ¼lmaschine Clatronic
- SpĆ¼lmaschine Sanyo
- SpĆ¼lmaschine Medion
- SpĆ¼lmaschine Hanseatic
- SpĆ¼lmaschine LG
- SpĆ¼lmaschine Bosch
- SpĆ¼lmaschine AEG
- SpĆ¼lmaschine Asko
- SpĆ¼lmaschine Siemens
- SpĆ¼lmaschine ATAG
- SpĆ¼lmaschine Bauknecht
- SpĆ¼lmaschine Concept
- SpĆ¼lmaschine Electrolux
- SpĆ¼lmaschine Fagor
- SpĆ¼lmaschine Gaggenau
- SpĆ¼lmaschine Gorenje
- SpĆ¼lmaschine Klarstein
- SpĆ¼lmaschine Koenic
- SpĆ¼lmaschine KĆ¼ppersbusch
- SpĆ¼lmaschine Miele
- SpĆ¼lmaschine Teka
- SpĆ¼lmaschine Whirlpool
- SpĆ¼lmaschine Bomann
- SpĆ¼lmaschine OK
- SpĆ¼lmaschine Russell Hobbs
- SpĆ¼lmaschine Vox
- SpĆ¼lmaschine IKEA
- SpĆ¼lmaschine Bush
- SpĆ¼lmaschine Telefunken
- SpĆ¼lmaschine Thomson
- SpĆ¼lmaschine Amica
- SpĆ¼lmaschine BEKO
- SpĆ¼lmaschine Blaupunkt
- SpĆ¼lmaschine Grundig
- SpĆ¼lmaschine Hotpoint
- SpĆ¼lmaschine Inventum
- SpĆ¼lmaschine Kenwood
- SpĆ¼lmaschine KitchenAid
- SpĆ¼lmaschine Schneider
- SpĆ¼lmaschine Sharp
- SpĆ¼lmaschine Smeg
- SpĆ¼lmaschine Tomado
- SpĆ¼lmaschine AEG-Electrolux
- SpĆ¼lmaschine Ardo
- SpĆ¼lmaschine Aspes
- SpĆ¼lmaschine Balay
- SpĆ¼lmaschine Blomberg
- SpĆ¼lmaschine Scandomestic
- SpĆ¼lmaschine Brandt
- SpĆ¼lmaschine Candy
- SpĆ¼lmaschine Comfee
- SpĆ¼lmaschine Constructa
- SpĆ¼lmaschine CorberĆ³
- SpĆ¼lmaschine Daewoo
- SpĆ¼lmaschine Elektra Bregenz
- SpĆ¼lmaschine ELIN
- SpĆ¼lmaschine Eudora
- SpĆ¼lmaschine Eurotech
- SpĆ¼lmaschine Exquisit
- SpĆ¼lmaschine Haier
- SpĆ¼lmaschine Hisense
- SpĆ¼lmaschine Hoover
- SpĆ¼lmaschine Hotpoint-Ariston
- SpĆ¼lmaschine Ignis
- SpĆ¼lmaschine Bartscher
- SpĆ¼lmaschine Indesit
- SpĆ¼lmaschine Juno
- SpĆ¼lmaschine Juno-Electrolux
- SpĆ¼lmaschine Baumatic
- SpĆ¼lmaschine Kelvinator
- SpĆ¼lmaschine Bertazzoni
- SpĆ¼lmaschine Luxor
- SpĆ¼lmaschine Maytag
- SpĆ¼lmaschine Midea
- SpĆ¼lmaschine Caple
- SpĆ¼lmaschine NABO
- SpĆ¼lmaschine Neff
- SpĆ¼lmaschine Nordmende
- SpĆ¼lmaschine Privileg
- SpĆ¼lmaschine Progress
- SpĆ¼lmaschine Rex
- SpĆ¼lmaschine ETNA
- SpĆ¼lmaschine ScholtĆØs
- SpĆ¼lmaschine Frigidaire
- SpĆ¼lmaschine SIBIR
- SpĆ¼lmaschine Svan
- SpĆ¼lmaschine Techwood
- SpĆ¼lmaschine Hoonved
- SpĆ¼lmaschine Thor
- SpĆ¼lmaschine V-ZUG
- SpĆ¼lmaschine Vestel
- SpĆ¼lmaschine Vestfrost
- SpĆ¼lmaschine Junker
- SpĆ¼lmaschine Zanker
- SpĆ¼lmaschine Kaiser
- SpĆ¼lmaschine Zanussi
- SpĆ¼lmaschine KKT Kolbe
- SpĆ¼lmaschine Leonard
- SpĆ¼lmaschine MACH
- SpĆ¼lmaschine Oranier
- SpĆ¼lmaschine Pelgrim
- SpĆ¼lmaschine Philco
- SpĆ¼lmaschine Respekta
- SpĆ¼lmaschine RosiĆØres
- SpĆ¼lmaschine Therma
- SpĆ¼lmaschine Thermador
- SpĆ¼lmaschine Winterhalter
- SpĆ¼lmaschine Zoppas
- SpĆ¼lmaschine ArƧelik
- SpĆ¼lmaschine Continental Edison
- SpĆ¼lmaschine Hyundai
- SpĆ¼lmaschine Kernau
- SpĆ¼lmaschine Tesla
- SpĆ¼lmaschine DeLonghi
- SpĆ¼lmaschine Frilec
- SpĆ¼lmaschine Novy
- SpĆ¼lmaschine Cylinda
- SpĆ¼lmaschine De Dietrich
- SpĆ¼lmaschine Hansa
- SpĆ¼lmaschine UPO
- SpĆ¼lmaschine Meiko
- SpĆ¼lmaschine Dacor
- SpĆ¼lmaschine Westinghouse
- SpĆ¼lmaschine Amana
- SpĆ¼lmaschine Gram
- SpĆ¼lmaschine Omega
- SpĆ¼lmaschine Profilo
- SpĆ¼lmaschine Lamona
- SpĆ¼lmaschine Meireles
- SpĆ¼lmaschine New Pol
- SpĆ¼lmaschine Crosley
- SpĆ¼lmaschine Danby
- SpĆ¼lmaschine Viking
- SpĆ¼lmaschine Vedette
- SpĆ¼lmaschine Ariston Thermo
- SpĆ¼lmaschine Signature
- SpĆ¼lmaschine Bellini
- SpĆ¼lmaschine Swan
- SpĆ¼lmaschine AYA
- SpĆ¼lmaschine Fisher & Paykel
- SpĆ¼lmaschine CDA
- SpĆ¼lmaschine General Electric
- SpĆ¼lmaschine Flavel
- SpĆ¼lmaschine Seiki
- SpĆ¼lmaschine Hobart
- SpĆ¼lmaschine Defy
- SpĆ¼lmaschine Electra
- SpĆ¼lmaschine Jocel
- SpĆ¼lmaschine Kenmore
- SpĆ¼lmaschine BLANCO
- SpĆ¼lmaschine Avanti
- SpĆ¼lmaschine Kunft
- SpĆ¼lmaschine Becken
- SpĆ¼lmaschine JennAir
- SpĆ¼lmaschine Winia
- SpĆ¼lmaschine Godrej
- SpĆ¼lmaschine Equator
- SpĆ¼lmaschine Cookology
- SpĆ¼lmaschine ARC
- SpĆ¼lmaschine Bar Maid
- SpĆ¼lmaschine Jackson
- SpĆ¼lmaschine Euro Appliances
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
21 August 2024
19 August 2024
18 April 2024
17 April 2024
17 April 2024
17 April 2024
17 April 2024
17 April 2024
17 April 2024
16 April 2024