GE AHR50LL Bedienungsanleitung

GE Luftreiniger AHR50LL

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für GE AHR50LL (70 Seiten) in der Kategorie Luftreiniger. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/70

Safety Instructions . . . . . . . . . . .2, 3

Operating Instructions

About the Controls

on the Dehumidifier . . . . . . . . . . . .4

Automatic Defrost . . . . . . . . . . . . . . .5

Choosing a Location . . . . . . . . . . . . .5

How the Dehumidifier Operates . . .5

Removing Collected Water . . . . . .6

Water Level . . . . . . . . . . . . . . . . . . . .6

Care and Cleaning

Grille and Case . . . . . . . . . . . . . . . . .7

Water Bucket . . . . . . . . . . . . . . . . . . .7

Troubleshooting Tips . . . . . . . . . . .8

Consumer Support

Consumer Support . . . . . . . . . . . . .12

Warranty . . . . . . . . . . . . . . . . . . . . .11

E SNERGY TAR®labeled product

As an E SNERGY TAR®partner, GE has

determined that this product meets the

E SNERGY TAR®guidelines for energy

efficiency.

ge.com

Dehumidifiers

49-7589 12-07 JR

AHR30

AHW30

AHH40

AHR40

AHW40

AHR50

AHW50

AHR65

AHW65

Owner’s Manual

Write the model and serial numbers here:

Model #__________________________

Serial # __________________________

You can find them on a label on the back

of the dehumidifier.

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

■ Use this appliance only for its intended

purpose as described in this Owner’s

Manual.

■ This dehumidifier must be properly

installed and grounded as described

in this manual before it is used.

■ Never operate this dehumidifier in an area

that is likely to accumulate standing water.

If this condition develops, for your safety

disconnect the power supply before

stepping into the water.

■ Never unplug your dehumidifier by pulling

on the power cord. Always grip plug firmly

and pull straight out from the receptacle.

■ Replace immediately all electric service

cords that have become frayed or otherwise

damaged. A damaged power supply cord

must be replaced with a new power supply

cord obtained from the manufacturer and

not repaired. Do not use a cord that shows

cracks or abrasion damage along its length

or at either the plug or connector end.

■ If the receptacle does not match the plug,

the receptacle must be changed out by a

qualified electrician.

■ Turn the dehumidifier

OFF

and unplug it

before cleaning.

■ GE does not support any servicing of

the dehumidifier. We strongly recommend

that you do not attempt to service the

dehumidifier yourself.

■ For your safety, do not store or use

combustible materials, gasoline or other

flammable vapors or liquids in the vicinity

of this or any other appliance.

■ All dehumidifiers contain refrigerants,

which under federal law must be removed

prior to product disposal. If you are getting

rid of an old product with refrigerants,

check with the company handling disposal

about what to do.

■ Do not use outdoors.

■ This dehumidifier is intended for

indoor residential applications only.

This dehumidifier should not be used

for commercial or industrial applications.

When using this dehumidifier, always follow basic safety precautions, including the following:

SAFETY PRECAUTIONS

Do not, under any circumstances, cut or remove

the third (ground) prong from the power cord.

For personal safety, this appliance must be

properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped

with a 3-prong (grounding) plug which mates

with a standard 3-prong (grounding) wall

outlet to minimize the possibility of electric

shock hazard from this appliance.

Have the wall outlet and circuit checked by a

qualified electrician to make sure the outlet is

properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation

to have it replaced with a properly grounded

3-prong wall outlet.

The dehumidifier should always be

plugged into its own individual electrical

outlet, which has a voltage rating matching

the rating plate.

This provides the best performance and also

prevents overloading house wiring circuits,

which could cause a fire hazard from

overheated wires.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips Operating Instructions Safety InstructionsTroubleshooting Tips Care and Cleaning Safety InstructionsOperating Instructions

WARNING!