Garmin Quest 2 Bedienungsanleitung

Garmin Navigator Quest 2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garmin Quest 2 (2 Seiten) in der Kategorie Navigator. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

To stop or resume the current route:

1. Press the key, highlight and press . A Route MENU Route Options, OK

Options menu appears.

2. Highlight or , and press to Stop Navigation Resume Navigation OK

stop or start the active route.

To add via points (extra stops) during a route:

1. Press the key, highlight and press . A Route MENU Route Options, OK

Options menu appears.

2. Highlight , and press . An information page for your current Vias OK

route appears.

3. Use the pad to highlight the box, and press . Rocker Via Points OK

4. Highlight and press . A window appears <Select to add via point>, OK

with three options for ﬁnding your location.

5. Select one of the three options. Once you select an option, the new via

point appears on your route page.

6. To add more via points, repeat steps 4 and 5 above.

7. Highlight , and press when you are done. Your original Navigate OK

route is automatically recalculated to include the newly-added via

point(s).

To install the vehicle suction cup mount:

1. Align the ball on the end of the suction mount with the socket (hole)

on the back of the cradle. Press ﬁrmly to snap the mount and cradle

together.

2. Flip up the antenna on the back of the unit. Angle the Quest forward

and ﬁt the bottom of the Quest into the cradle. Tilt the unit back until it

snaps in place.

3. To ensure a tight grip, clean and dry your windshield before you mount

the suction cup. Flip the lever on the suction cup toward you.

4. Place the suction cup on your windshield. Flip the lever back, toward

the windshield.

5. Plug the power cable into an available receptacle.

NOTICE TO STATE OF CALIFORNIA DRIVERS: California Vehicle Code Section 26708 (a) (1) provides

that drivers in California should not use suction mounts on their windshield or side or rear windows. Other Garmin

dashboard or friction mounting options should be used. For available accessories, refer to the Garmin Web site at

www.garmin.com. Also, refer to the Owner’s Manual for instructions on using the included mounting disk with the

suction cup mount.

January 2006 1

90-00556-11 Rev. A Printed in Taiwan

Finding Places and Routing to Them

To ﬁnd a place and route to it:

1. Press the key. A Find page appears.FIND

2. Highlight an option that will help you ﬁnd your destination, such as Auto

Fuel, Food & Drink, or Lodging. Press the key. A list of places near OK

your current location appears.

3. Highlight the place you wish to visit, and press . An information OK

page appears. (If you know you will want to visit this place again, select

Save to add it to your My Locations list.)

4. Highlight Route To OK on the information page, and press . Your Quest

calculates the route. Follow the calculated route to the destination.

To ﬁnd an address and route to it:

1. Press the key, highlight , and press . FIND Addresses OK

2. A Wizard opens. Highlight the state if it appears on a button, or choose

Select State OK and ﬁnd the correct name. Press .

3. Highlight Search All Cities OK, and press . You can also highlight

Spell City, OK and press . Enter the city using the on-screen keyboard.

4. Enter the address number and street using the on-screen keyboard.

For intersections, you only need to enter street names.

5. A list of addresses appears. Highlight the desired address, and press

OK. An Address page appears.

6. To create a route to this address, highlight Route To OK, and press .

Quest™ 2 Quick Reference Guide

Use this Quick Reference Guide to learn how to perform common

operations with your Quest 2. For a more thorough and detailed

explanation of operations and features, consult the Owner’s Manual.

Keep this guide in a handy place for future reference.

Turning the Quest On

Press and hold the Power key on the front of the unit to turn it on.

Vehicle Installation

Select a suitable location for installing the unit that allows routing of

the power cord and does not interfere with vehicle operation. Refer to

the safety warnings in the Owner’s Manual. Select a location where the

Quest’s ﬂip-up antenna has an unobstructed view of the sky. For optimal

use, position the antenna parallel to the surface of the road.

Stopping & Starting Routes and Adding Via PointsInstalling the Suction Cup Mount

Suction

cup

Lever

Release

tab

Cradle

Suction

cup tab

To set a Home location:

1. Press the key, highlight , and press .MENU Route Options OK

2. Highlight and press . A Set Home Location Set Home Location, OK

menu appears.

3. Highlight one of the options: , , Use Current Location Use Find Menu

or and then press .Use Map, OK

4. Select your destination using this option. Your Home location is set.

To go Home:

Press and hold the key. FIND

To reset the trip data or the maximum speed:

1. On the Trip Information page, use the

Rocker Trip Max pad to highlight the or

buttons. Press . OK

2. A message asking if you want to reset

the data appears (Reset Trip Data? or

Reset Maximum Speed?).

3. Highlight Yes OK, and press . The data is

reset.

Shortcuts:

• Press and hold to navigate to your Home location.FIND

• Press two times to display the Recent Finds page.FIND

• Press and hold to display the Route Options menu.MENU

• Press two times to display the Settings page.MENU

• Press and hold to display the Where Am I? page.OK

• Press to activate the backlight illumination window.POWER

• Press zoom or to page up or page down a list. IN OUT

• Press and if your Quest freezes (stops responding to button IN Power

presses).

To ﬁnd where you are:

1. Press the key. The Find page appears.FIND

2. From the Find page, highlight Where Am I? OK. , and press An

information page appears, listing your current location and nearest

major intersections.

To use TracBack:

1. Access the Where Am I? information page as described above.

2. Highlight TracBack OK, and press .

3. At the prompt, highlight Yes to TracBack to the beginning of the track,

and press .OK

4. Highlight a TracBack Preference (Follow Track, Faster Time, or

Shorter Distance OK), and press . The Quest calculates your route.

To adjust the backlight:

1. Press the key. An illumination window appears. Power

2. Press the pad left or right to dim or brighten your backlight.Rocker

3. Press .OK

To adjust the external speaker volume:

1. Adjust the volume control knob on the external speaker.

2. Press the key to test the volume level.SPEAK

To add a detour during a route:

1. Press the key, highlight and press . A Route MENU Route Options, OK

Options menu appears.

2. Highlight Detour, OK and press .

3. From the Detour Distance page, highlight the distance for which you

would like to alter your route, and press . Your original route is OK

recalculated to avoid the upcoming section of road.

To plan a route:

1. Press the key, highlight and press . A Route MENU Route Options, OK

Options menu appears.

2. Highlight Route Planner, OK and press . From the Route List page that

appears, highlight , and press . New OK

3. Highlight , and press . Select one <Select your starting location> OK

of the three options, and then select your starting location.

4. Highlight , and press . Select one of the <Select your destination> OK

three options, and then select your destination.

5. From the Route Planner window, highlight , and press . Navigate OK

Your Quest calculates the route.

Setting Your Home Location and Resetting Trip Info Finding Where You Are, Using TracBack®, and

Making Adjustments Using ShortcutsAdding Detours and Planning Routes

Trip Information Page

Produktspezifikationen

Marke:	Garmin
Kategorie:	Navigator
Modell:	Quest 2
Touchscreen:	Nein
Anzahl der Farben des Displays:	262144 Farben
Bluetooth:	Nein
Akku-/Batteriebetriebsdauer:	20 h
Breite:	114.3 mm
Tiefe:	22.9 mm
Gewicht:	155.92 g
Produktfarbe:	Grau
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	55.9 mm
Display:	LCD
Formfaktor:	Handgeführt
Marine:	Nein
Sport (Fitness, Rennen):	Nein
Outdoor(Bergwandern, Trekking):	Ja
Geocaching:	Nein
Auto:	Nein
Luftfahrt:	Nein
Geschwindigkeitsbegrenzungen:	Nein
Auswahl zur Routeeinstellung:	Ja
Basemap:	Ja
Fahrrad:	Ja
Motorrad:	Ja
Rechner:	Nein
Anzahl Routen:	50
Zahl von Zwischenstationen:	500
Fahrstreckenvermeidung:	Ja
MP3-Spieler:	Nein
UKW-Transmitter:	Nein
Bildbetrachter:	Nein
Anzeigegröße (HxV):	2.2 x 1.5 Zoll
Auto-Umleitung:	Ja
Fotonavigation:	Nein
Weltreisenuhr:	Nein
FM-Traffic-kompatibel:	Nein
Display-Auflösung:	240 x 160 Pixel