Garmin Nüvi 3540 Bedienungsanleitung

Garmin Navigator Nüvi 3540

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garmin Nüvi 3540 (87 Seiten) in der Kategorie Navigator. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/87
April 2012 190-01387-00_0C Printed in Taiwan
nüvi® 3500 series
owner's manual
© 2012 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written
consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of
this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin
.com for current updates and supplemental information concerning the use of this product.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve its
products and to make changes in the content without obligation to notify any person or organization of such changes
or improvements. Go to the Garmin Web site (www.garmin.com) for current updates and supplemental information
concerning the use and operation of this and other Garmin products.
Garmin®, the Garmin logo, nüvi®, and MapSource ® are trademarks of Garmin Ltd. or its subsidiaries, registered in the
USA and other countries. BaseCamp™, HomePort™, cityXplorer, ecoRoute, myTrends, nüMaps Guarantee,
nüMaps Lifetime, myGarmin, and trafcTrends
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks
may not be used without the express permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is
under license. Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/
or other countries. Mac®
is a trademark of Apple Computer, Inc. microSD is a trademark of SD-3C, LLC. Audible.com ®
and AudibleReady® are registred trademarks of Audible, Inc. © 1997–2011 Audible. HD Radio Technology manufactured
under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio and the HD logo are proprietary
trademarks of iBiquity Digital Corp.
.
nüvi 3500 Series Owner’s Manual iii
Table of Contents
Getting Started ����������������������������������������� 1
Connecting the Device to Vehicle Power ........... 1
About myDashboard .......................................... 2
About Sleep Mode ............................................. 4
Adjusting the Screen Brightness ....................... 4
Adjusting the Master Volume ............................. 4
About Automatic Volume ................................... 4
Status Bar Icons ................................................ 5
Satellite Signals ................................................. 5
Using the On-screen Buttons ............................ 6
Using the On-screen Keyboard ......................... 7
About Shortcuts ................................................. 7
Finding Locations ������������������������������������ 8
About Locations ................................................. 8
About Search Tools ......................................... 11
Saving a Home Location ................................. 14
Finding Recently Found Places ....................... 14
Finding Parking ................................................ 14
Setting a Simulated Location ........................... 14
Saving Locations ............................................. 15
Voice Command ������������������������������������� 17
About Voice Command .................................... 17
Navigation ���������������������������������������������� 20
Starting a Route ............................................... 20
Following an Automobile Route ....................... 20
About Exit Services ......................................... 23
Avoiding Road Features .................................. 24
About Custom Avoidances .............................. 24
Enabling Advanced Detours ............................ 25
Navigating Off Road ........................................ 26
Map Pages ���������������������������������������������� 26
Customizing the Map ....................................... 26
Viewing Turns .................................................. 28
Viewing Current Location Information ............. 30
Pedestrian Routes ........................................... 30
Hands-Free Phone Calls ����������������������� 32
About Hands-Free Calling ............................... 32
nüvi 3500 Series Owner’s Manual v
About the Trafc Icon ....................................... 57
Trafc on Your Route ....................................... 58
Trafc in Your Area .......................................... 59
Understanding Trafc Data .............................. 59
About Trafc Cameras ..................................... 59
Trafc Subscriptions ........................................ 60
Data Management ���������������������������������� 61
File Types ........................................................ 61
About Memory Cards ....................................... 62
Transferring Files from Your Computer ........... 62
Deleting Files .................................................. 63
Customizing the Device ������������������������ 63
Map and Vehicle Settings ................................ 63
Navigation Settings .......................................... 64
Display Settings ............................................... 65
Bluetooth Settings ........................................... 65
Trafc Settings ................................................. 66
Units and Time Settings................................... 67
Language and Keyboard Settings ................... 67
Proximity Alerts Settings .................................. 67
Device and Privacy Settings ............................ 68
Restoring Settings ........................................... 68
Appendix ������������������������������������������������ 68
Power Cables .................................................. 68
Caring for Your Device ..................................... 69
Changing the Fuse in the Vehicle Power
Cable ............................................................... 70
Mounting on Your Dashboard .......................... 71
Removing the Device, Cradle, and Mount ....... 71
Updating Maps ................................................ 72
Purchasing Additional Maps ............................ 72
Safety Cameras ............................................... 72
Custom Points of Interest ................................ 73
Purchasing Accessories .................................. 73
Troubleshooting .............................................. 74
Index ������������������������������������������������������� 76
nüvi 3500 Series Owner’s Manual 1
Getting Started
WARNING
See the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
1 Mount the device ( ).page 1
2 Register the device ( ).page 3
3 Check for updates.
Software updates ( ).page 3
Free map update ( ).page 3
Connecting the Device to Vehicle
Power
WARNING
This product contains a lithium-ion battery.
To prevent the possibility of personal injury or
product damage caused by battery exposure
to extreme heat, remove the device from the
vehicle when exiting or store it out of direct
sunlight.
Before you use your device on battery power,
you should charge it.
1 Plug the vehicle power cable into the
USB port on the mount .
2 Snap the mount onto the suction cup .
3 Press the suction cup to the windshield, and
ip the lever back toward the windshield.
4 Fit the bottom of your device into the mount.
5 Tilt your device back until it snaps into place.
2 nüvi 3500 Series Owner’s Manual
6 Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
7 If necessary, connect the external antenna
to the trafc receiver and secure it to the
windshield using the suction cups.
About myDashboard
Use myDashboard to register your device, check
for software and map updates, access product
manuals and support, and more.
Setting Up myDashboard
1 Connect the USB cable to the USB port on
the device.
2 Connect the USB cable to the USB port
on your computer.
3 Go to www.garmin.com/dashboard.
4 Follow the on-screen instructions.
nüvi 3500 Series Owner’s Manual 3
Registering the Device
1 From myDashboard, click .Register Now
2 Follow on-screen instructions.
Updating the Software
1 Open myDashboard ( ).page 2
2 Under Software Updates, click .Update Now
3 Follow the on-screen instructions.
nüMaps Guarantee
To receive one free map update (if available),
register your device at http://my.garmin.com
within 90 days of acquiring satellites while
driving with your device. You are not eligible for
the free map update if you register by phone or
wait longer than 90 days after the rst time you
acquire satellites while driving with your device.
For more information, go to www.garmin.com
/numaps.
Updating Maps
1 Open myDashboard ( ).page 2
2 Register the device ( ).page 3
3 Select an option:
Under Map Updates, click .Update Now
If a free map update is no longer
available, click .Buy Now
4 Follow the on-screen instructions.
Turning Off the Device
You can power off the device completely.
1 Hold the key Power .
NOTE: If you hold the Power key for less
than 4 seconds, the device enters sleep
mode.
4 nüvi 3500 Series Owner’s Manual
2 Select .Off
Resetting the Device
You can reset your device if it stops functioning
Hold the key for 10 seconds.Power
About Sleep Mode
Use sleep mode to conserve battery power
when your device is not in use. Sleep mode
uses very little power, and a battery charge lasts
for weeks when your device is in sleep mode.
Entering Sleep Mode
Press the key.Power
Exiting Sleep Mode
While the device is in sleep mode, press the
Power key and double-tap .
Adjusting the Screen Brightness
1 Select > > .Settings Display Brightness
2 Use the slider bar to adjust the brightness.
Adjusting the Master Volume
1 Select Volume.
2 Select an option:
Use the slider bar to adjust the volume.
Select to mute the device.
Select > and use the Audio Mixer
slider bars to adjust the volume for
navigation prompts, phone, and media.
About Automatic Volume
On devices with hands-free calling, automatic
volume allows the device to adjust the volume
level based on the background noise in the
vehicle. See page 32
Automatic volume control lowers the volume of
the device when background noise is low and
raises the volume level when background noise
increases.
nüvi 3500 Series Owner’s Manual 5
Enabling Automatic Volume
Your device can increase or decrease the
volume automatically based on the level of
background noise.
1 Select Volume Automatic Volume > > .
2 Select > .Enabled Save
Status Bar Icons
The status bar is located at the top of the main
menu. The status bar icons display information
about features on the device. You can select
some icons to change settings or view additional
information.
GPS signal status.
Bluetooth® technology status (appears
when connected to a compatible device).
Transportation mode indicator.
Current time.
Battery status.
Smartphone Link status (appears when
connected to Smartphone Link). See
page 36.
Satellite Signals
After the device is turned on, it begins acquiring
satellite signals. The device may need a clear
view of the sky to acquire satellite signals. When
at least one of the bars is green, your
device has acquired satellite signals.
6 nüvi 3500 Series Owner’s Manual
Viewing GPS Satellite Signals
For more information about GPS, go to
www.garmin.com/aboutGPS.
Hold .
Transportation Modes
Automobile mode
Pedestrian mode
Routing and navigation are calculated differently
based on your transportation mode.
For example, in Automobile mode, the estimated
time of arrival is calculated using the speed
limit of the roads on the route. Pedestrian mode
calculates time of arrival based on walking
speed.
NOTE: Pedestrian routes do not include
highways. If you have cityXplorer maps loaded
on your device, pedestrian routes may include
public transit ( ).page 31
Choosing a Transportation Mode
Select .
Battery Information
After the device is connected to power, it begins
to charge.
The icon in the status bar indicates the
status of the internal battery. To increase the
accuracy of the battery gauge, you should fully
discharge the battery and then fully charge it. Do
not unplug the device until it is fully charged.
Using the On-screen Buttons
Select to return to the main menu.
Hold to quickly return to the main menu.
Select or to see more choices.
Hold or to scroll faster.
nüvi 3500 Series Owner’s Manual 7
Select to see a menu of options for the
current screen.
Using the On-screen Keyboard
See Language and Keyboard Settings to
change the keyboard layout ( ). Select page 67
a character on the keyboard to enter a letter or
number.
Select to add a space.
Hold to delete a character.
Select to erase the entire entry.
Select to select the keyboard language
mode.
Select to enter special characters,
such as punctuation marks.
Select to change character
capitalization.
About Shortcuts
You can add shortcuts to the Where To? menu.
A shortcut can point to a location, a category, or
a search tool.
Adding a Shortcut Icon
The Where To? menu can contain up to 36
shortcut icons.
1 Select Where To? Add Shortcut> .
2 Select an item.
Removing a Shortcut
1 Select Where To Remove > >
Shortcut(s).
2 Select the shortcut to remove.
3 Select the shortcut again to conrm.
8 nüvi 3500 Series Owner’s Manual
Finding Locations
The device offers many methods for nding
locations.
By category ( )page 8
Near another location ( )page 10
By spelling the name (page 11)
By address (page 11)
Using recently found locations ( )page 14
Using coordinates ( )page 12
Using the map ( )page 13
Using saved locations ( )page 15
About Locations
The detailed maps loaded in your device contain
locations, such as restaurants, hotels, and auto
services. You can use categories to browse for
nearby businesses and attractions.
Finding a Location by Category
1 Select Where To?.
2 Select a category, or select .Categories
3 If necessary, select a subcategory.
4 Select a location.
Searching Within a Category
To narrow your search results, you can search
within some categories.
1 Select Where To?.
2 Select a category, or select .Categories
3 If necessary, select a subcategory.
4 If necessary, enter all or part of the name in
the search bar ( ).page 9
nüvi 3500 Series Owner’s Manual 9
Finding a Location Using the Search Bar
You can use the search bar to search for
locations by entering a category, brand name,
address, or city name.
1 Select Where To?.
2 Select the search bar .
3 Enter a search term.
Suggested search terms appear below the
search bar as you type.
4 Select an option:
To search for a type of business, enter
a category name, such as “movie
theaters.”
To search for a business by name, enter
all or part of the name.
To search for an address near you, enter
the street number and street name.
To search for an address in another city,
enter the street number, street name,
city, and state.
To search for a city, enter the city and
state.
To search for coordinates, enter latitude
and longitude coordinates.
5 Select an option:
To search using a suggested search
term, select the term.
To search using the text you entered,
select .
6 If necessary, select a location.
10 nüvi 3500 Series Owner’s Manual
Changing the Search Area
By default, your device nds locations closest
to your current location. You can nd a location
near another city or location.
1 Select Where To? Searching Near > .
2 Select an option.
3 If necessary, select a location.
Reporting a Closed or Missing Location
If your search results include an outdated or
incorrect location, you can report the error to
Garmin and remove the location from future
searches.
1 Search for a location ( ).page 8
2 From the search results, select a location.
3 Select .
4 Select > .Edit
5 Select or Report as Closed Report as
Missing.
This information is sent to Garmin when you
connect to Smartphone Link (see ) or page 36
when you connect your device to myDashboard
using your computer (see ).page 2
Editing Location Information
You can change the address or phone number
for a location that appears in the search results.
1 Search for a location.
2 From the search results, select a location.
3 Select .
4 Select > .Edit
5 Select or , and Address Phone Number
enter the new information.
Rating a Point of Interest
You can assign a star rating to a point of
interest.
1 Search for a location ( ).page 8
2 From the search results, select a location.
nüvi 3500 Series Owner’s Manual 11
3
Select .
4 Select the stars to rate the point of interest.
The star rating updates on your device.
About Search Tools
You can search for locations by using the on-
screen keyboard or by entering the location’s
address or coordinates.
Finding Fuel Stations and Prices
Before you can use this feature, you must
subscribe to the Fuel Price service, and your
device must be connected to a supported phone
running Smartphone Link ( ). This feature page 36
is not available in all areas.
You can nd nearby fuel stations and compare
fuel prices.
1 Select Where To? Categories Fuel > >
Prices.
2 If necessary, select > Fuel Type, select a
fuel type, and select .Save
3 Select a fuel station.
Finding an Address
NOTE: The order of the steps may change
depending on the map data loaded on your
device.
1 Select Where To? Address > .
2 Enter the address number, and select . Done
3 Enter the street name, and select .Next
4 If necessary, select to change Searching In
the city, state, or province.
5 If necessary, select the city, the state, or the
province.
6 If necessary, select the address.
12 nüvi 3500 Series Owner’s Manual
Finding a City
1 Select Where To? Categories Cities > > .
2 Select .Enter Search
3 Enter a city name, and select .
4 Select a city.
Finding an Intersection
Before you can nd an intersection, you must
add a shortcut to the intersection search tool
( ).page 7
1 Select Where To? Categories > >
Intersections.
2 Select a state or province.
NOTE: If necessary, select State or Country
to change the country, state, or province.
3 Enter the rst street name, and select .Next
4 If necessary, select the street.
5 Enter the second street name, and select
Next.
6 If necessary, select the street.
7 If necessary, select the intersection.
Finding a Location Using Coordinates
Before you can nd a location using coordinates,
you must add a shortcut to the coordinates
search tool ( ).page 7
You can nd a location using latitude and
longitude coordinates. This can be helpful when
geocaching.
1 Select Where To? Categories > >
Coordinates.
2 If necessary, select > , select the Format
correct coordinate format for the type of map
you are using, and select .Save
3 Select the latitude coordinate.
4 Enter the new coordinate, and select .Done
5 Select the longitude coordinate.
6 Enter the new coordinate, and select .Done
nüvi 3500 Series Owner’s Manual 13
7 Select .View on Map
Finding a Location by Browsing the Map
Before you can nd places included in the map
data, such as restaurants, hospitals, and fuel
stations, you must enable the map layer for
places along the road ( ).page 26
1 Select . View Map
2 Drag and zoom the map to display the area
to search.
3 If necessary, select , and select a
category icon to view only a specic
category of places.
Location markers ( or a blue dot) appear
on the map.
4 Select an option:
Select a location marker.
Select a point, such as a street,
intersection, or address location.
5 If necessary, select the location description
to view additional information.
Searching within a Category
After you have performed a search for a point
of interest, certain categories may display a
Quick Search list that displays the last four
destinations you selected.
1 Select Where To?.
2 Select a category, or select .Categories
3 If applicable, select a destination from the
Quick Search list.
4 If necessary, select the appropriate
destination.
14 nüvi 3500 Series Owner’s Manual
Saving a Home Location
You can set your home location for the location
you return to most often.
1 Select Where To? Set Home > >
Location.
2 Select Enter My Address Use My Current ,
Location Recently Found, or .
The location is saved as “Home” in the Saved
menu ( ).page 15
Going Home
Select Where To? Go Home > .
Editing Your Home Location Information
1 Select Where To? Saved Home > > .
2 Select > > . Edit
3 Enter your changes.
4 Select .Done
Finding Recently Found Places
Your device stores the last 50 locations you
have found.
1 Select Where To? Recent > .
2 Select a location.
Clearing the List of Recently Found
Places
Select Where To? Recent Clear > > >
> Yes.
Finding Parking
1 Select Where To? Categories Parking > > .
2 Select a parking location.
Setting a Simulated Location
If you are indoors or not receiving satellite
signals, you can use the GPS to set a simulated
location.
1 Select > .Settings Navigation
nüvi 3500 Series Owner’s Manual 15
2 Select .GPS Simulator
3 From the main menu, select .View Map
4 Select an area on the map.
The address of the location appears at the
bottom of the screen.
5 Select the location description.
6 Select .Set Location
Saving Locations
You can save locations so you can quickly nd
them and create routes to them.
Saving a Location
1 Search for a location ( ).page 8
2 From the search results, select a location.
3 Select .
4 Select > . Save
5 If necessary, enter a name, and select .Done
Saving Your Current Location
1 From the map, select the vehicle icon.
2 Select .Save
3 Enter a name, and select .Done
4 Select .OK
Starting a Route to a Saved Location
1 Select Where To? Saved > .
2 If necessary, select a category, or select All
Saved Places.
3 Select a location.
4 Select Go!�
Editing a Saved Location
1 Select Where To? Saved > .
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select > .Edit
16 nüvi 3500 Series Owner’s Manual
6 Select an option:
Select . Name
Select . Phone Number
To assign categories to the Favorite,
select .Categories
To save a photo with the Favorite, select
Assign Photo ( ).page 45
To change the symbol used to mark the
Favorite on a map, select Change Map
Symbol.
7 Edit the information.
8 Select .Done
Assigning Categories to a Saved
Location
You can add custom categories to organize your
saved locations.
NOTE: Categories appear in the saved locations
menu after you have saved more than 12
locations.
1 Select Where To? Saved > .
2 Select a location.
3 Select .
4 Select > > .Edit Categories
5 Enter one or more category names,
separated by commas.
6 If necessary, select a suggested category.
7 Select .Done
Sharing a Saved Location
If you save the location of a business that is not
in the map data, you can share the location with
Garmin so that it can be added to future map
updates and shared with the Garmin community.
1 Select Where To? Saved> .
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select .Share Place
nüvi 3500 Series Owner’s Manual 17
6 Enter one or more categories that apply to
the location, and select .Done
7 Select .Share
This information is sent to Garmin when you
connect to Smartphone Link or when you
connect your device to myGarmin using your
computer ( ).page 36
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? Saved > .
2 Select > .Delete Saved Places
3 Select the box next to the saved locations to
delete, and select .Delete
Voice Command
About Voice Command
NOTE: Voice Command is not available for
all languages and regions, and may not be
available on all models.
Voice Command allows you to use your device
by saying words and commands. The Voice
Command menu provides voice prompts and a
list of available commands.
Setting Your Wakeup Phrase
The wakeup phrase is a word or phrase you can
say to activate Voice Command. The default
wakeup phrase is Voice Command.
TIP: You can reduce the chance of accidental
Voice Command activation by using a strong
wakeup phrase.
1 Select > Apps Voice Command >
Customize Phrase.
18 nüvi 3500 Series Owner’s Manual
2 Enter a new wakeup phrase.
The device indicates the strength of the
wakeup phrase as you enter the phrase.
3 Select .Done
Activating Voice Command
Say your wakeup phrase.
The Voice Command menu appears.
Voice Command Tips
Speak in a normal voice directed at the
device.
Reduce background noise, such as voices
or the radio, to increase the accuracy of the
voice recognition.
Speak commands as they appear on the
screen.
Respond to voice prompts from the device
as needed.
Increase the length of your wakeup phrase
to reduce the chance of accidental Voice
Command activation.
Listen for two tones to conrm when the
device enters and exits Voice Command
mode.
Starting a Route Using Voice Command
You can say the names of popular, well-known
locations.
1 Say your wakeup phrase ( ). page 17
2 Say .Find Place
3 Listen for the voice prompt, and speak the
name of the location.
nüvi 3500 Series Owner’s Manual 19
A list of locations appears.
4 Say the line number.
5 Say .Navigate
Finding an Address
1 Say Voice Command.
2 Say Find Address.
3 Speak the entire address.
Muting Instructions
You can disable the voice prompts for Voice
Command without muting the device.
1 Select > Apps Voice Command > .
2 Select > .Mute Instructions Enabled
Disabling Voice Command
You can disable Voice Command, which
prevents you from accidentally activating Voice
Command while speaking.
1 Select > Apps Voice Command > .
2 Select Voice Command Disabled > .
20 nüvi 3500 Series Owner’s Manual
Navigation
Starting a Route
1 Search for a location ( ).page 9
2 Select a location.
3 Select .Go!
4 If necessary, select an option.
Select .Drive
Select Walk.
Select Public Transit to calculate a route
that combines public transit and walking.
NOTE: You must have cityXplorer maps
loaded to navigate using public transit
( ).page 31
5 If necessary, select a route.
Previewing Multiple Routes
1 Search for a location ( ).page 9
2 From the search results, select a location.
3 Select .Routes
4 Use the on-screen buttons to select a route.
5 Select .Go!
Following an Automobile Route
The route is marked with a magenta line. A
checkered ag marks your destination.
As you travel, the device guides you to the
destination with voice prompts, arrows on the
map, and directions at the top of the map. If
you depart from the original route, the device
recalculates the route and provides new
directions.
nüvi 3500 Series Owner’s Manual 21
Using the Navigation Map
1 From the main menu, select .View Map
2 If the zoom controls are hidden, select the
map to display the zoom controls.
3 Select the map to switch to browsing mode.
Map buttons appear.
4 Select an option:
To zoom in or out, select or .
To rotate the map view, select .
To switch between North Up and 3-D
views, select .
To add or remove map layers, select
.
To view specic location categories,
select and select a category icon.
To center the map on your current
location, select .
To view shortcuts for map and navigation
features, select .
Using Multi-touch Controls
You can use multi-touch controls to change
the map view while using the navigation map
( ).page 21
Drag the map to view different parts of
the map.
Double-tap the map to zoom in one level.
Pinch two ngers together on the screen
to zoom out.
Spread two ngers on the screen to
zoom in.
Drag two ngers left or right to rotate the
map.
nüvi 3500 Series Owner’s Manual 23
1
From the map, select > Set Speed
Limit.
2 Select and to set the
speed limit.
Using Suggested Routes
Before you can use this feature, you must save
at least one location and enable the travel
history feature ( ).page 68
Using the myTrends feature, your device
predicts your destination based on your travel
history, the day of the week, and the time of day.
After you have driven to a saved location several
times, the location may appear in the navigation
bar on the map, along with the estimated time of
travel, and trafc information.
Select the navigation bar to view a
suggested route to the location.
About Exit Services
While you navigate a route, you can nd gas,
food, lodging, and rest rooms near upcoming
exits.
Services are listed under tabs by category.
Gas
Food
Lodging
Restrooms
Finding Exit Services
1 From the map, select > .Exit Services
2 Use the arrows to select an upcoming exit.
3 Select an exit service tab.
4 Select a point of interest.
24 nüvi 3500 Series Owner’s Manual
Navigating to an Exit
1 From the map, select > >Exit Services
2 Select . Go!
Avoiding Road Features
1 Select > > Settings Navigation
Avoidances.
2 Select the road features to avoid on your
routes, and select .Save
Avoiding Transit Types
NOTE: Transit types are available when
cityXplorer maps are loaded ( ).page 31
1 Select > > Settings Navigation Public
Transit.
2 Select the transit type to avoid on your
routes.
3 Select .Save
About Custom Avoidances
Custom avoidances allow you to avoid specic
areas and sections of road. You can enable and
disable custom avoidances as needed.
Avoiding an Area
1 Select > > Settings Navigation Custom
Avoidances.
2 If necessary, select Add Avoidance.
3 Select Add Avoid Area.
4 Select the upper-left corner of the area to
avoid, and select .Next
5 Select the lower-right corner of the area to
avoid, and select .Next
The selected area is shaded on the map.
6 Select .Done
Avoiding a Road
1 Select > > Settings Navigation Custom
Avoidances.
nüvi 3500 Series Owner’s Manual 25
2 Select Add Avoid Road.
3 Select the starting point of the section of
road to avoid, and select .Next
4 Select the ending point of the road section,
and select .Next
5 Select .Done
Disabling a Custom Avoidance
You can disable a custom avoidance without
deleting it.
1 Select > > Settings Navigation Custom
Avoidances�
2 Select an avoidance.
3 Select > .Disable
Deleting Custom Avoidances
1 Select > > Settings Navigation Custom
Avoidances.
2 Select an option:
To delete all custom avoidances, select
.
To delete one custom avoidance, select
the avoidance, and select > .Delete
Enabling Advanced Detours
Select > > Settings Navigation Advanced
Detours.
Taking a Detour Around Specied Areas
You can take a detour for a specied distance
along your route or detour around specic roads.
This is useful if you encounter construction
zones, closed roads, or poor road conditions.
1 Select a destination, and select Go!
( ).page 8
2 From the map, select > Detour
3 Select , Next �5mi on Route Next 2mi on
Route Next 5mi on Route Detour by , , or
Road(s) on Route.
26 nüvi 3500 Series Owner’s Manual
4 If necessary, select a road to detour around.
Navigating Off Road
If you are not following roadways as you
navigate, you can use Off Road mode.
1 Select > .Settings Navigation
2 Select > > Calculation Mode Off Road
Save.
The route will be calculated as a straight line
to the location.
Map Pages
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the
map, such as icons for points of interest and
road conditions.
1 From the map, select .
2 Select .Map Layers
3 Select which layers you want to include on
the map, and select .Save
Viewing the Trip Log
Your device keeps a trip log, which is a record of
the path you have traveled.
1 Select > Settings Map and Vehicle Map >
Layers.
2 Select the Trip Log check box.
Changing the Map Data Field
1 From the map, select the data eld in the
lower left-hand corner.
2 Select a type of data to display.
3 Select .Save
28 nüvi 3500 Series Owner’s Manual
Viewing Turns
Viewing a List of Turns
When you are navigating a route, you can view
all of the turns and maneuvers for your entire
route and the distance between turns.
1 Select the text bar on the top of the map.
2 Select a turn.
The details for the turn appear. If available,
an image of the junction appears for junction
on major roadways.

1 While navigating an automobile route, select
the navigation bar at the top of the map.
2 Select > .Map
Viewing the Next Turn
While navigating an automobile route, a preview
of the next turn, lane change, or other maneuver
appears in the upper-left corner of the map.
The preview includes the distance to the turn or
maneuver and the lane in which you should be
traveling, if available.
From the map, select to view the next
turn on the map.
Viewing Junctions
While navigating an automobile route, you can
view the junctions on major roadways. When
nüvi 3500 Series Owner’s Manual 29
you approach a junction in a route, the image of
that junction appears briey, if available.
From the map, select to view the
junction, if available.
Viewing Trafc Alerts
While you navigate an automobile route, a trafc
alert may appear.
Select the alert to view more information.
Viewing Trip Information
The trip information page displays your present
speed and provides statistics about your trip.
TIP: If you make frequent stops, leave the
device turned on so it can accurately measure
elapsed time during the trip.
From the map, select > Trip Computer.

1 From the map, select > Trip Computer.
2 Select > .Reset Field(s)
3 Select an option:
When not navigating a route, select
Select All to reset every data eld,
except the speedometer, on the page.
Select Reset Trip Data to reset the
information on the trip computer.
30 nüvi 3500 Series Owner’s Manual
Select to reset the Reset Max� Speed
maximum speed.
Select Reset Trip B to reset the
odometer.
Viewing Current Location
Information
You can use the Where Am I? page to view
information about your current location. This
feature is helpful if you need to tell emergency
personnel your location.
From the map, select > Where Am I?.
Finding Nearby Services
You can use the Where Am I? page to nd
nearby services, such as hospitals or police
stations.
1 From the map, select > Where Am I?.
2 Select a category.
Getting Directions to Your Current
Location
If you need to tell another person how to get to
your current location, your device can give you a
list of directions.
Select > Apps Where Am I? > >
Directions to Me.
Pedestrian Routes
Following a Pedestrian Route
In Pedestrian mode, your route is displayed on a
two-dimensional map.
If you have cityXplorer maps installed,
the device calculates a route that uses a
combination of public transit options, such as
riding a bus or subway, and walking.
NOTE: cityXplorer maps are not included with
the device. Go to http://my.garmin.com to
purchase cityXplorer maps.
nüvi 3500 Series Owners Manual 31
NOTE: You can change the types of public
transit and limit the distance spent walking
during a pedestrian route ( ).page 64
Using the Pedestrian Navigation Map
See for more map functions.page 21
Select to switch between sections of the
route.
Select
to view the route itinerary.
About Map Icons
When you are navigating in Pedestrian
mode, indicates your approximate
position and your direction of travel on the
map.
The circle around indicates the accuracy
of your position on the map. A smaller
circle means the displayed position is more
accurate.
The yellow icons indicate the transportation
method used in each section of the route.
For example, when you see , board a bus
at that point in the route.
The black dots on the map show public
transit stops along your route.
Enabling Transit Types
NOTE: Transit types are available when
cityXplorer maps are loaded ( ).page 30
1 Select > > Settings Navigation Public
Transit.
32 nüvi 3500 Series Owners Manual
2 Select the transit type to include in your
routes, and select .Save
Hands-Free Phone Calls
About Hands-Free Calling
Using Bluetooth
®
wireless technology, your
device can connect to your mobile phone to
become a hands-free device. To determine
whether your mobile phone with Bluetooth
technology is compatible with your device, go to
www.garmin.com/bluetooth.
Your phone may not support all of the hands-
free phone features your device provides.
Enabling Bluetooth Wireless Technology
1 Select > .Settings Bluetooth
2 Select .Bluetooth
Pairing Your Phone
Before you can use hands-free calling, you must
pair your device with a compatible mobile phone.
Pairing your phone with your device allows your
phone and device to recognize each other and
connect quickly.
1 Place your phone and your device within 33
ft. (10 m) of each other.
2 On your device, enable Bluetooth wireless
technology ( ).page 32
3 Select an option:
Select .Add Phone
If you have already paired a different
phone, select > > Settings Bluetooth
Phone > .
4 On your phone, enable Bluetooth wireless
technology.
5 On your device, select .OK
A list of nearby Bluetooth devices appears.
nüvi 3500 Series Owners Manual 33
6 Select your phone from the list, and select
OK.
7 If necessary, on your phone, conrm that the
device is allowed to connect.
8 If necessary, enter the device Bluetooth PIN
( ) into your phone. 1234
Disconnecting Your Phone
1 Select > .Settings Bluetooth
2 Select > > .Phone None Save
Your phone is disconnected from your device but
remains paired with your device.
Tips After Pairing the Devices
After the initial pairing, the two devices can
connect automatically each time you turn
them on.
When your phone is connected to your
device, you are ready to make phone calls.
When you turn on the device, it tries to
connect to the last phone to which it was
connected.
You might need to set your mobile phone to
connect to the device automatically when the
device is turned on.
Placing a Call
Dialing a Number
1 Select > . Phone Dial
2 Enter the number.
3 Select .Dial
Calling a Contact in Your Phone Book
Your phone book is loaded from your phone to
the device each time your phone and the device
connect. It may take a few minutes for the phone
book to be available. Some phones do not
support this feature.
1
Select > .Phone Phone Book
nüvi 3500 Series Owners Manual 35
Saving a Home Phone Number
TIP: After you save a home number, you can
edit the home number by editing “Home” in your
list of saved locations ( ).page 15
Select > Phone > , Set Home Number
enter your phone number, and select .Done
Calling Home
Before you can call home using the Call Home
button, you must enter a phone number for your
home location.
Select > > Saved Home > . Call
Using the Apps
Using Help
Select > to view information Apps Help
about using the device.
Searching Help Topics
Select > > .Apps Help
About Smartphone Link
Smartphone Link is a phone application that
allows your device to download live data using
your phone data connection. Your device
transfers data from Smartphone Link using
Bluetooth wireless technology.
Connecting to Smartphone Link provides access
to Garmin Live Services. Garmin Live Services
provides free and subscription-based plans to
view live data on your device, such as trafc
data, weather, and fuel prices.
36 nüvi 3500 Series Owners Manual
Saved locations and recently found locations are
synchronized with your phone each time your
device connects to Smartphone Link.
Downloading Smartphone Link
Smartphone Link supports phones running
Android
operating system version 2.1 or newer.
Download Smartphone Link from the application
market on your supported phone. See your
phone owner's manual for information on
downloading and installing applications.
Connecting to Smartphone Link
Before you can connect to Smartphone Link,
you must download and install the Smartphone
Link application on your phone.
1 Start Smartphone Link on your phone.
2 From your device, select > Settings
Bluetooth Bluetooth, and select the check
box.
3 From your phone, select Bluetooth
Settings.
4 From your phone, enable Bluetooth wireless
technology, and scan for nearby Bluetooth
devices.
See your phone owner's manual for more
information.
5 From your phone, select your device from
the list of nearby devices.
6 Follow the on-screen instructions on your
phone and on your device to conrm the
pairing request.
appears in the status bar on your device
when Smartphone Link is connected.
nüvi 3500 Series Owners Manual 37
Sending a Location from Your Phone to
Your Device
Smartphone Link is registered as a navigation
application on your phone.
1 From your phone, select the button to start
navigating to a location (see the owner's
manual for your phone).
2 Select Smartphone Link from the application
menu.
The next time you connect your device to your
phone, the location is transferred to the recently
found items on your device.
Disabling Calls While Connected to
Smartphone Link
While the device is connected to the phone and
receiving Garmin Live Services, you can disable
hands-free calling.
1 Select > .Apps Smartphone Link
2 Select your phone.
3 Clear the check box.Hands-Free Calling
About Garmin Live Services
NOTE: Smartphone Link supports phones
running Android operating system version 2.1
or newer.
Before you can use Garmin Live Services, your
device must be connected to a supported phone
running Smartphone Link ( ). page 36
Connecting to Smartphone Link provides access
to Garmin Live Services. Garmin Live Services
provide free and subscription-based plans to
view live data on your device, such as trafc
data, weather and fuel prices.
Some Garmin Live Services, like Weather, are
available as separate apps on your device.
Other Garmin Live Services, like Live Trafc,
enhance the existing navigation features on your
device. Features that require access to Garmin
Live Services display the Smartphone Link
38 nüvi 3500 Series Owners Manual
symbol and appear only when the device is
connected to Smartphone Link.
Subscribing to Garmin Live Services
You must subscribe to Garmin Live Services
using the Smartphone Link app on your phone.
1 Start the Smartphone Link app on your
phone ( ).page 36
2 Select .Garmin Live Services
A list of services and subscription prices
appears.
3 Select a service.
4 Select the price.
5 Select .Subscribe
6 Follow the on-screen instructions.
About ecoRoute
In some areas, before you can use ecoRoute
features, you must purchase an unlock code or
an ecoRoute HD accessory. Go to www.garmin
.com/ecoroute for more information.
The ecoRoute
feature calculates the fuel
economy and the fuel price of navigating to a
destination, and offers tools for improving fuel
efciency.
The data provided by the ecoRoute feature is an
estimate only. The data is not actually read from
the vehicle, unless you are using the ecoRoute
HD accessory.
To receive more-accurate fuel reports for your
specic vehicle and driving habits, calibrate the
fuel economy ( ).page 39
ecoRoute HD Accessory
When connected to the ecoRoute HD accessory,
your device can receive real-time vehicle
information, such as error messages, RPM, and
battery voltage. Your device includes data read
from the vehicle by the ecoRoute HD accessory
when calculating ecoRoute data.
nüvi 3500 Series Owners Manual 39
Go to www.garmin.com/ecoroute for
compatibility and purchasing information.
Setting Up the Vehicle Prole
The rst time you use the ecoRoute features,
you must enter vehicle information.
1 Select > Apps ecoRoute
.
2 Enter fuel and mileage information.
Changing the Fuel Price
1 Select > Apps ecoRoute
> .At the Pump
2 Enter the current price of fuel, and select
Next.
3 Select Yes.
Calibrating the Fuel Economy
You can calibrate the fuel economy to receive
more-accurate fuel reports for your specic
vehicle and driving habits. You should calibrate
when you ll up your fuel tank.
1 Select > Apps ecoRoute
> .At the Pump
2 Enter the current fuel price.
3 Enter the amount of fuel the vehicle has
used since the last time the fuel tank was
lled.
4 Enter the distance you have travelled since
the last time the fuel tank was lled.
5 Select . Next
The device calculates the average vehicle
fuel economy.
6 Select .Save
About the ecoChallenge
ecoChallenge helps you maximize the vehicle
fuel economy by scoring your driving habits. The
higher your ecoChallenge scores, the more fuel
you have saved. The ecoChallenge collects data
and calculates a score whenever your device is
moving and in Automobile transportation mode.
40 nüvi 3500 Series Owners Manual
Viewing ecoChallenge Scores
View your current score in the
ecoChallenge icon on the map.
Select to view detailed scores.
About the ecoChallenge Score
Current: Displays the score for your current
driving activity.
Overall: Displays an average of the speed,
acceleration, and braking score.
Speed: Displays your score for driving your
vehicle at the optimal speed for conserving
fuel (45–60 mph for most vehicles).
Acceleration: Displays your score for smooth
and gradual acceleration. You lose points for
rapid acceleration.
Braking: Displays your score for smooth and
gradual braking. You lose points for hard
braking.
Removing the ecoChallenge Score From the
Map
Select > > > > . Settings Hide Save
Resetting the ecoChallenge Scores
Select > > .Reset
Viewing Fuel Economy Information
You can view your fuel consumption, your total
fuel cost, and your average fuel economy.
1 Select > > .Apps ecoRoute Fuel Economy
2 Select a section of the graph to zoom in.
Mileage Reports
Mileage reports provide the distance, the time,
the average fuel economy, and the fuel cost of
navigating to a destination.
A mileage report is created for every route that
you drive. If you stop a route on the device, a
mileage report is created for the distance you
traveled.
nüvi 3500 Series Owners Manual 41
Viewing a Mileage Report
You can view saved mileage reports on the
device.
TIP: You can access mileage reports in the
Reports folder on the device drive/volume
( ).page 62
1 Select > Apps ecoRoute
> Mileage
Report.
2 Select a report.
Resetting ecoRoute Information
1 Select > Apps ecoRoute
> Vehicle
Prole.
2 Select > . Reset
Viewing myGarmin Messages
Before you can use this feature, your device
must be connected to a supported phone
running Smartphone Link ( ). This feature page 36
is not available in all areas.
You can view messages from myGarmin, such
as notications for software and map updates.
1 Select > .Apps myGarmin
If you have unread messages, the number of
unread messages appears on the myGarmin
icon.
2 Select a message subject.
The full message appears.
Viewing the Weather Forecast
Before you can use this feature, your device
must be connected to a supported phone
running Smartphone Link ( ). This feature page 36
is not available in all areas.
1 Select > .Apps Weather
The forecast for your current location
appears.
2 Select a day.
The detailed forecast for that day appears.
42 nüvi 3500 Series Owners Manual
Viewing Weather Near a Different City
1 Select > > Apps Weather Current
Location.
2 Select an option:
To view weather for a favorite city, select
a city in the list.
To add a favorite city, select , Add City
and enter a city name.
Viewing the Weather Radar
You can view an animated, color-coded radar
map of current weather conditions, as well as
a weather icon on the map. The weather icon
changes to show weather in the vicinity, such as
rain, snow, and thunderstorms.
1 Select > .Apps Weather
2 If necessary, select a city.
3 Select > .Weather Radar
Viewing Weather Alerts
While you are traveling with your device,
weather alerts may appear on the map. You
can also view a map of weather alerts near your
current location or near a selected city.
1 Select > .Apps Weather
2 If necessary, select a city.
3 Select > Weather Alerts.
Checking Road Conditions
1 Select > .Apps Weather
2 If necessary, select a city.
3 Select > .Road Conditions
About Audiobooks
The device can play audiobooks from Audible
.com. This feature requires a subscription to
Audible.com. Go to www.audible.com/garmin to
activate a free 30-day trial subscription.
nüvi 3500 Series Owners Manual 43
Loading Audiobooks onto Your Device
Before you can load audiobooks onto your
device, you must subscribe to Audible.com.
Go to www.audible.com/garmin for more
information.
1 Connect your device to your computer
( ).page 2
2 On your computer, log in to your Audible.com
account.
3 Follow the instructions from Audible.com.
Playing an Audiobook
1 Select > .Apps Audible
2 Select .Browse
3 Select , , , or Titles Authors Narrators
Bookmarks.
4 Select a book.
5 Select an option to control playback:
To add a bookmark, select .
To pause playback, select .
To resume playback, select .
To move quickly forward or backward in
the book, use the slider bar at the top of
the page.
To go to the next chapter, select .
To go to the previous chapter, select
.
To fast forward, hold .
To rewind, hold .
Adding a Bookmark
When you play an audiobook, the player
automatically resumes the audiobook from
the point where you last stopped. You can
add a bookmark to mark a certain spot in the
audiobook.
While playing an audiobook, select > Add
Bookmark.
44 nüvi 3500 Series Owners Manual
Resuming Playback from a Bookmark
1 While playing an audiobook, select .
2 Select a bookmark.
Renaming a Bookmark
By default, the device names a bookmark
using the time stamp of the bookmark. You can
rename a bookmark.
1 While playing an audiobook, select >
> .Rename Bookmarks
2 Select a bookmark.
3 Enter a name, and select .Done
Deleting a Bookmark
1 While playing an audiobook, select >
> .Delete Bookmarks
2 Select a bookmark.
Planning a Trip
You can use the trip planner to create and save
a trip with multiple destinations.
1 Select > Apps Trip Planner.
2 Select .
3 Select .Select Start Location
4 Search for a location ( ).page 8
5 Select .Select
6 To add additional locations, select .
7 Select .Next
8 Enter a name, and select .Done
Editing a Trip Itinerary
1 Select > Apps Trip Planner.
2 Select a saved trip.
3 Select an option:
To change the arrival or departure time,
select a location in the trip.
nüvi 3500 Series Owners Manual 45
To record how long you will stay at a
location, select a location in the trip, and
select . Duration
To change the transportation mode or
route preference for a trip leg, select a
leg, and select Transportation Mode.
To view the trip on the map, select .Map
Navigating to a Saved Trip
1 Select > Apps Trip Planner.
2 Select a saved trip.
3 Select .Go!
4 If prompted, select a route ( ).page 20
Editing a Saved Trip
1 Select > Apps Trip Planner.
2 Select a saved trip.
3 Select .
4 Select an option:
Select Rename Trip.
Select to add and Edit Destinations
delete locations, or to change the order
of locations.
Select Delete Trip.
Select to arrange the Optimize Order
stops on your trip in the most-efcient
order.
Viewing Pictures
You can view pictures that you have stored in
the device or on a memory card. See page 61
for more information about loading pictures on
the device.
1 Select > . Apps Picture Viewer
2 Use the arrows to scroll through the images.
3 Select a picture.
46 nüvi 3500 Series Owners Manual
Viewing a Slideshow
1 Select > .Apps Picture Viewer
2 Select .
3 While a slideshow is playing, select the
screen to stop the slideshow.
Setting a Picture as Wallpaper
1 Select > .Apps Picture Viewer
2 Select a picture.
3 Select > Set as Wallpaper.
4 Use the on-screen buttons to adjust the
wallpaper.
5 Select .Save
Deleting Pictures
1 Select > . Apps Picture Viewer
2 Select a picture.
3 Select > >Delete Yes.
Viewing Previous Routes and
Destinations
Before you can use this feature, you must
enable the travel history feature ( ).page 66
You can view your previous routes and places
you have stopped on the map.
Select > .Apps Where I’ve Been
Using the World Clock
1 Select > .Apps World Clock
2 If necessary, select a city, enter a city name,
and select . Done
Viewing the World Map
Select > > . Apps World Clock
Nighttime hours appear in the shaded area
of the map.
nüvi 3500 Series Owners Manual 47
Using the Media Player
On some models, the media player can play
MP3 music les. You can load music les
into the Music folder on your device or onto a
memory card.
See to add les to your device.page 62
1 Select > .Apps Media Player
2 Select an option:
To play a song, select .
To adjust the volume, select .
To toggle between songs, select
and .
To shufe songs, select .
To view the current playlist, select the
title of the playing song.
To repeat the playlist, select .
To repeat a song, select .
Browsing Music Files
You can browse to nd other songs you have
loaded on the device.
1 Select > .Apps Media Player
2 Select .Browse
3 Select an option.
Creating a Playlist
You can create playlists, which allows you to
quickly queue a list of songs for playback.
1 Select > .Apps Media Player
2 Select > > .Browse Playlists New Playlist
3 Enter a name, and select .Done
4 Select , , , or All Songs Albums Artists
Genres.
5 If necessary, select an album, artist, or
genre.
6 Select the check box next to each item to
add to the playlist, and select .Save
48 nüvi 3500 Series Owners Manual
editing a Playlist
You can edit the songs or the order of songs in a
playlist, or you can delete a playlist.
1 Select > > > Apps Media Player Browse
Playlists.
2 Select a playlist.
3 Select . Edit Playlist
4 Select , , Add Song Remove Song Reorder
Songs Rename Playlist Delete , , or
Playlist.
5 Follow the on-screen prompts.
Playing a Video
On some devices, you can play video.
Before you can play a video, you must load a
compatible video le onto your device ( ).page 62
1 Select > .Apps Video Player
2 Select a video.
3
Select the screen to view the playback
controls.
Supported Video Formats
The video player supports these video le
formats.
AVI le containing h.264 video and AAC
audio.
MP4 le containing h.264 video and AAC
audio.
ASF le containing WMV video and WMA
audio.
Setting an Alarm
1 Select > .Apps Alarm Clock
2 Set a time.
3 Select the check box.Alarm On
nüvi 3500 Series Owners Manual 49
Finding Parking
Before you can use this feature, you must
subscribe to the Dynamic Parking service, and
your device must be connected to a supported
phone running Smartphone Link ( ). This page 36
feature is not available in all areas.
You can nd detailed parking information, in
cluding parking availability in nearby garages,
and pricing information.
1 Select > .Apps Parking
2 Select a parking location.
Finding Your Last Parking Spot
When you remove your device from the vehicle
mount while the device is on, your current
location is saved as a parking spot.
Select > .Apps Last Spot
Saving a Parking Spot
1 Select > .Apps Last Spot
2 Select > .Save
3 If necessary, enter a name.
Using the Calculator
Select > .Apps Calculator
Converting Units
1 Select > . Apps Unit Converter
2 If necessary, select the button next to
Convert, select a measurement category,
and select .Save
3 If necessary, select a unit button, select a
unit of measurement, and select .Save
4 Select the eld below the unit you want to
convert.
5 Enter the number, and select .Done
nüvi 3500 Series Owners Manual 51
2 Select a category and subcategories.
3 If necessary, select , enter a keyword,
and select .Done
4 Select a word or a phrase.
5 Select to listen to the translation.
Using a Bilingual Dictionary
1 Select > > Apps Language Guide Bilingual
Dictionaries.
2 Select a dictionary.
3 If necessary, select , enter a word, and
select .Done
4 Select a word.
5 Select to listen to the translation.
About Tracker
noTiCeS
Use caution when sharing your location
information with others.
Before you can use this feature, your device
must be connected to a supported smartphone
running Smartphone Link ( ). This feature page 36
is not available in all areas.
Tracker allows you to report your location, follow
others, and allow others to follow your location.
Tracker is available on select Garmin GPS
devices and as an application for select mobile
phones.
Setting Up Tracker
1 Select > Apps Tracker Get Started > .
2 Follow the on-screen instructions.
52 nüvi 3500 Series Owners Manual
Changing Your Nickname
The rst time you power on your device, you are
prompted to enter the nickname that identies
you when you use Tracker.
1 Select > Apps Tracker Prole > > .
2 Beside , select .Nickname Edit
3 Enter a nickname, and select .Done
Viewing Your Tracker ID
Your Tracker ID identies your device uniquely
to other Tracker users. Other users can use your
Tracker ID to invite you as a follower.
Select > Apps Tracker > > .Prole
About Followers
You can invite another person to follow your
location for a specied period of time. When that
time expires, the follower can no longer view
your location.
You can invite a follower using an email address
or a Tracker ID. If you invite a follower using
an email address, that person must follow you
using the Garmin website. If you invite a follower
using a Tracker ID, that person can follow you
using Tracker.
Following Others
Before you can follow someone using your
device, that person must invite you to follow him
or her using your Tracker ID.
1 Select > Apps Tracker View > .
2 Select a person.
The location of the selected person appears on
the map.
Viewing Followers
You can view a list of users who are currently
following you.
Select > Apps Tracker > .View


Produktspezifikationen

Marke: Garmin
Kategorie: Navigator
Modell: Nüvi 3540

Brauchst du Hilfe?

Wenn Sie Hilfe mit Garmin Nüvi 3540 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Navigator Garmin

Bedienungsanleitung Navigator

Neueste Bedienungsanleitung für -Kategorien-