Garmin HUD+ Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garmin HUD+ (5 Seiten) in der Kategorie Navigator. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Garmin® HUD+
Owner’s Manual
December 2013 190-01716-00_0A Printed in Taiwan
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to for current updates and supplemental information concerning the use of this product.www.garmin.com
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be
used without the express permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. iPad ®, the Apple logo,
iTunes®, and iPhone® are trademarks of Apple® Inc., registered in the U.S. and other countries. App Store SM is a service mark of Apple, Inc. Android is a
trademark of Google. Windows ® Phone is a registered trademark of Microsoft® Corporation in the United States and other countries. Other trademarks and
trade names are those of their respective owners.
Getting Started
WARNING
See the guide in the Important Safety and Product Information
product box for product warnings and other important
information.
Downloading the Application
Before you can use the device, you must download and install
the Garmin HUD app to your smartphone.
1On your compatible smartphone, open the application store
and search for Garmin HUD.
2Install the Garmin HUD app.
See the owner's manual for your smartphone or mobile
media device for more information.
Applying the Film to the Windscreen
NOTICE
Before applying the film to the windscreen, check all applicable
laws and ordinances in the area where you drive. Some laws
prohibit or restrict the application of film to the front window. It is
your responsibility to apply the film in compliance with all
applicable laws and ordinances. Garmin is not responsible for
any fines, penalties, or damages that may be incurred as a
result of any law or ordinance relating to the use of your Garmin
device.
Before applying the film, test the location with the device turned
on.
You can use the included film to reflect the display onto the
windscreen.
1Select a location to apply the film.
See the guide for Important Safety and Product Information
more information.
2Clean and dry the windscreen with a lint-free cloth.
3Pull the white tab to remove the protective layer from the
adhesive side of the film.
4Apply the film to the window, with the protective layer with
the green tab facing out.
5Use a card to scrape the bubbles out to the edge of the film.
Only remove the bubbles when the top protective layer is still
on the film.
The fewer bubbles under the film, the better the view of the
data.
6Allow the film to dry for 10 minutes.
7Pull the green tab to remove the final protective layer from
the film.
Connecting the Reflector Lens
You can use the snap-on reflector lens instead of the
windscreen film. This allows you to use the head-up display in
other vehicles or in areas where the film is not permitted.
Snap the reflector lens onto the device.
Connecting to Vehicle Power
You can charge a smartphone device using the USB port on the
vehicle power connector.
1Plug the vehicle power cable into a power outlet in your
vehicle.
2Plug the other end of the device power cable
À to the small
hole on the device.
3If necessary, plug the smartphone power cable into the USB
port Á.
Placing the Device on the Dashboard
WARNING
When placing the device in a vehicle, observe all placement
considerations listed in the Important Safety and Product
Information guide.
1Select a location for the device.
2Clean and dry the dashboard where you are placing the
device.
3Place the device on the dashboard.
4Press the base down.
The base conforms to the shape of the dashboard.
5Adjust the viewing angle as needed.
TIP: Adjusting the viewing angle can also increase the
brightness of the display.
If the bottom surface of the device slides on the dashboard due
to dust and dirt buildup, wipe it clean using a cloth dampened
only with water. Do not use soap or cleaning fluids.
Connecting the Device to Your Smartphone
Before you can use the head-up display, you must pair it with
your smartphone.
1Plug in and turn on the device.
2Bring the smartphone and the device within 33 ft. (10 m) of
each other.
3On the smartphone, enable Bluetooth
® wireless technology
and search for devices.
A list of nearby Bluetooth devices appears.
Getting Started 1


Produktspezifikationen

Marke: Garmin
Kategorie: Navigator
Modell: HUD+
Bluetooth: Ja
Gewicht: 277 g
Produktfarbe: Schwarz
Display: VFD
Abmessungen (BxTxH): 108 x 19 x 88 mm

Brauchst du Hilfe?

Wenn Sie Hilfe mit Garmin HUD+ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Navigator Garmin

Bedienungsanleitung Navigator

Neueste Bedienungsanleitung für -Kategorien-