Garmin HUD Bedienungsanleitung

Garmin Navigator HUD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garmin HUD (6 Seiten) in der Kategorie Navigator. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such

changes or improvements. Go to for current updates and supplemental information concerning the use of this product.www.garmin.com

Garmin®, the Garmin logo, and StreetPilot ® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks

may not be used without the express permission of Garmin.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. iPad ® and iPhone ® are

trademarks of Apple® Inc., registered in the U.S. and other countries. Android™ is a trademark of Google Inc. Windows ® is a registered trademark of

Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of their respective owners.

Getting Started

WARNING

See the guide in the Important Safety and Product Information

product box for product warnings and other important

information.

Applying the Film to the Windscreen

NOTICE

Before applying the film to the windscreen, check all applicable

laws and ordinances in the area where you drive. Some laws

prohibit or restrict the application of film to the front window. It is

your responsibility to apply the film in compliance with all

applicable laws and ordinances. Garmin is not responsible for

any fines, penalties, or damages that may be incurred as a

result of any law or ordinance relating to the use of your Garmin

device.

Before applying the film, test the location with the device turned

on. You cannot move the film after it is applied and has dried.

Do not apply the film to a dry surface. If you apply the film to a

dry surface and try to remove the bubbles, the film will be

ruined.

You can use the included film to reflect the display onto the

windscreen.

1Select a location to apply the film.

See the guide for Important Safety and Product Information

more information.

2Clean and dry the windscreen with a lint-free cloth.

3Spray clean water on the windscreen.

The water enables the film to attach to the window.

4Pull the white tab to remove the protective layer from the

adhesive side of the film.

5Apply the film to the window, with the protective layer with

the green tab facing out.

6If necessary, move the film to the ideal viewing location while

the windscreen is still wet.

7Use a card to scrape the bubbles out to the edge of the film.

Only remove the bubbles when the top protective layer is still

on the film.

The fewer bubbles under the film, the better the view of the

data.

8Pull the green tab to remove the final protective layer from

the film.

Connecting the Reflector Lens

You can use the snap-on reflector lens instead of the

windscreen film. This allows you to use the head-up display in

other vehicles or in areas where the film is not permitted.

Snap the reflector lens onto the device.

Connecting to Vehicle Power

You can charge a smartphone device using the USB port on the

vehicle power connector.

1Plug the vehicle power cable into a power outlet in your

vehicle.

2Plug the other end of the device power cable

À to the small

hole on the device.

3If necessary, plug the smartphone power cable into the USB

port Á.

Placing the Device on the Dashboard

WARNING

When placing the device in a vehicle, observe all placement

considerations listed in the Important Safety and Product

Information guide.

1Select a location for the device.

2Clean and dry the dashboard where you are placing the

device.

3Place the device on the dashboard.

4Press the base down.

The base conforms to the shape of the dashboard.

5Adjust the viewing angle as needed.

TIP: Adjusting the viewing angle can also increase the

brightness of the display.

If the bottom surface of the device slides on the dashboard due

to dust and dirt buildup, wipe it clean using a cloth dampened

only with water. Do not use soap or cleaning fluids.

Connecting the Device to Your Smartphone

Before you can use the head-up display, you must connect it to

your smartphone.

1Plug in the device and ensure it is turned on.

2Bring the smartphone and the device within 33 ft. (10 m) of

each other.

3On the smartphone, enable Bluetooth

® wireless technology

and search for devices.

A list of nearby Bluetooth devices appears.

4Select the Garmin HUD in the list.

Getting Started 1

Produktspezifikationen

Marke:	Garmin
Kategorie:	Navigator
Modell:	HUD
Breite:	108 mm
Tiefe:	88 mm
Gewicht:	277 g
Produktfarbe:	Schwarz
Höhe:	19 mm
Display:	VFD
Betriebsanleitung:	Ja
Kompatible Betriebssysteme:	iOS, Android, Windows Phone 8
Eingangsspannung:	5 V
Eingangsstrom:	2.1 A
Handy-Gerätetyp:	Handy/Smartphone