Garmin GLO 2 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garmin GLO 2 (68 Seiten) in der Kategorie GPS-Gerät. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/68
August 2018 190-02468-91_0A Printed in Taiwan
GLO 2 GLONASS and GPS Sensor Instructions �����������������������������������������������������������2
Instructions pour le capteur GLONASS et GPS GLO 2 �������������������������������������������������7
Istruzioni del sensore GLO 2 GLONASS e GPS ���������������������������������������������������������� 13
GLO 2-GLONASS- und GPS-SensorAnweisungen �������������������������������������������������18
Instrucciones del sensor de GPS y GLONASS GLO 2 ������������������������������������������������23
Instruções do GLO 2 GLONASS e do Sensor GPS ����������������������������������������������������� 28
Instructies voor GLO 2 GLONASS en GPS-sensor �����������������������������������������������������33
Vejledning til GLO 2 GLONASS og GPS-sensor ����������������������������������������������������������38
GLO 2- GLONASS- ja GPS-antureiden ohjeet �������������������������������������������������������������42
Instruksjoner for GLO 2 GLONASS- og GPS-sensor ��������������������������������������������������� 47
GLO 2 GLONASS- och GPS-sensorinstruktioner ��������������������������������������������������������51
Instrukcja obsługi czujnika GLO 2 GLONASS i GPS ���������������������������������������������������56
Инструкция по эксплуатации датчика GLO 2 для систем ГЛОНАСС и GPS ���������� 61
2
GLO 2 GLONASS and
GPS Sensor Instructions
Installing the Battery
WARNING
This product contains a lithium-ion battery
See page 5 for important battery safety
information�
1 With your thumbnail, slide the battery
cover release tab
2 Remove the battery cover
3 Locate the metal contacts on the end
of the lithium-ion battery
4 Insert the battery so the metal
contacts on the battery align with
the metal contacts inside the battery
compartment�
5 Press the battery down into place�
6 Insert the battery cover into the
notches and press down�
The release tab locks the cover in
place�
Replacement Battery
You can purchase a replacement battery
(010-10840-00) at http://buy�garmin�com�
Charging the Battery
You can use the sensor while you are
charging it�
1 Plug the small end of the power cable
into the mini-USB connector on the
end of the sensor
2 Plug the other end of the power cable
into an appropriate source of power for
the cable type�
It takes about three hours to charge the
battery� A fully charged battery lasts about
13 hours�
NOTE: If the battery has not been charged
for a long period of time, remove the
battery, connect the cable to the device
and a power source, and then replace the
batteryThe battery will charge as usual�
3
Pairing the Sensor
1 Hold to turn on the sensor
2 Turn on the other device and enable
the Bluetooth component�
You can refer to the device’s
documentation for specic instructions
about enabling Bluetooth wireless
technology
3 Bring the sensor within 30 feet (10
meters) of the mobile device�
4 Using the mobile device, pair the
sensor with the mobile device�
The blue LED is solid blue when the
sensor is connected to the other device�
If the sensor has not established a
Bluetooth connection for several minutes,
it turns off automatically
Bluetooth LED
LED Description
Slow ashing
blue
Searching for mobile devices
Rapid ashing
blue
Pairing
Solid blue Connected to mobile device
Status LED
LED Description
Slow ashing orange Charging
Solid orange Battery charged,
power connected�
Orange off Battery charged,
power disconnected�
Rapid ashing orange Low battery
Alternating orange
and green
Faulty battery or
system error
Flashing green Searching for GPS
satellites
Solid green GPS satellite x
Acquiring Satellite Signals
1 Verify that the blue LED on the sensor
is solid blue, indicating a wireless
connection�
2 Place the sensor where it has a clear
view of the sky
Acquiring satellite signals may take a
few minutes. The Status LED ashes
green while searching for satellites and
establishing your location� The Status LED
is solid green when it has established a x
on your location�

Produktspezifikationen

Marke: Garmin
Kategorie: GPS-Gerät
Modell: GLO 2
Akku-/Batteriekapazität: 1150 mAh
Breite: 17.8 mm
Tiefe: 77.2 mm
Gewicht: 60.1 g
Mitgelieferte Kabel: USB
Produktfarbe: Schwarz
Akku-/Batterietechnologie: Lithium-Ion (Li-Ion)
Höhe: 41.9 mm
Betriebstemperatur: -20 - 60 °C
Anzahl Kanäle: - Kanäle
LED-Anzeigen: Ja
Temperaturbereich bei Lagerung: -20 - 50 °C
Schnittstelle: Bluetooth
Benutzerhandbuch: Ja
Wiederaufladbar: Ja
Betriebszeit: 13 h
WAAS Fähigkeit: Ja
GPS Genauigkeit - Position: 3 m
GPS Genauigkeit - Geschwindigkeit: 411 m/s
Updaterate: 10 Hz
Sensitivität: - dBmW

Brauchst du Hilfe?

Wenn Sie Hilfe mit Garmin GLO 2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten