Fusion MS-CRGBWRC Bedienungsanleitung

Lies die bedienungsanleitung für Fusion MS-CRGBWRC (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 7 Bewertungen. Hast du eine Frage zu Fusion MS-CRGBWRC oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Wireless CRGBW LED Remote Control Instructions

Important Safety Information

WARNING

Failure to follow these warnings and cautions could result in personal injury, damage to the vessel, or poor

product performance.

See the Important Safety and Product Informationguide in the stereo box for product warnings and other

important information.

This device must be installed according to these instructions.

Disconnect the vessel's power supply before beginning to install this product.

CAUTION

Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.

NOTICE

When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.

You must read all installation instructions before beginning the installation. If you experience difficulty during

the installation, contact Fusion

®

Product Support.

Supplies and Tools Needed

•2-conductor 22 AWG (0.33 mm

2

) wire to connect the remote control receiver to the power source

•6-conductor 22 AWG (0.33 mm

2

) wire (or equivalent combination of 2- to 4-conductor wire) to connect the

receiver to the LED speakers

•Cable ties or adhesive for mounting the receiver

•4 gauge (3 mm) countersunk stainless-steel screws for mounting the remote cradle (optional)

•3 mm flat screwdriver

•Wire cutters

•Drill and drill bits for mounting the remote cradle (optional)

Mounting and Connection Considerations

When selecting a location for the remote control receiver and making the wiring connections, observe these

considerations.

•The receiver housing is not weather proof, and you must install the receiver in a location that is not exposed

to the elements.

•You can connect a single receiver to up to 10 LED speakers with RGB, cool white, and warm white

functionality (5 pair). You must use an additional receiver and remote control (sold separately) to connect to

additional LED speakers.

•You cannot use a single remote control with more than one receiver.

GUID-80736249-84A1-4457-B3FC-9231AA6112DC v2January 2022

Produktspezifikationen