Foscam FHC790 Bedienungsanleitung

Foscam Überwachungskamera FHC790

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Foscam FHC790 (2 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Foscam FHC790 Intelligent Security Camcorder Quick Start Guide
Overview
Congratulations on your purchase of the Foscam FHC790 intelligent security camcorder!
The Foscam FHC790 is an intelligent security camcorder with multiple triggering methods and multi
auto on/off modes. The camcorder comes with a built-in rechargeable battery which can
record up to 8 hours continuous video during typical use and standby for more than 3
months when vibration triggering is enabled. By plugging in the 5V DC adapter, it can achieve
192 hours of looped recording for surveillance use.*
* Actual life and performance may vary depending upon usage and settings; battery not replaceable.
Charging
The camcorder comes with an internal rechargeable battery. When using the camcorder for the
first time, or if you are using it after a long period of non-usage, remember to fully charge the battery
for at least 4 hours and resync the time by using the widget (see section “PC Software
Widget”). You can charge your camcorder using the USB port of your computer, the DC adapter, or
using a car adapter.
To charge the battery through USB port, connect the USB cable to the USB port of the
computer and the camcorder. For details, please see the status below. The camcorder will
function as a mass storage device, you will not be able to record video at this moment.
To charge the battery through a DC adapter or car adapter, connect the DC adapter or car
adapter to the camcorder. For details, please see the Status section below. Moreover, you will also be
able to record video while charging, depending on the mode you set.
Circular recording – Also known as “loop recording”. Overwrites recordings once memory card is full.
Time stamp – Inserts a time stamp onto the video.
Vibration-trigger recording – Select this to record only when vibration is detected.
Motion-trigger recording – Select this to record only when motion is detected.
Voice-trigger recording – Select this to record only when voice/talk is detected.
Auto on/off mode – Select different auto on/off scenarios.
Selectable day/night mode – Select day mode or night mode to suit your environment.
Auto gapless split file – Splits files without gaps at every 10 / 15 / 30 minutes of recording.
Orientation – Use when the camcorder is turned upside-down.
Selectable resolution – Select a resolution of 640x480(VGA) or 320x240(QVGA) video and sound.
Frame rate adjustment – Adjust or lower the frame rate to save memory space.
Configurable video quality – high / medium / low
Support max 64GB microSD (TF) card (for better performance, use a card with class 4 or
above and format the card before usage. Check the following link for more information:
(http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml)
Recording
The power button is located on the right side of the camcorder. It can turn the camcorder on
or off.
Start Recording
Press and hold the Power button until the green LED is on (approximately 2 seconds), and
then release the button. When you see the green LED flashing, the camcorder is recording.
If you see otherwise, please read the Status section below.
Stop Recording
Press and hold the Power button until the green LED is off (for approximately 2 seconds).
WARNING: Turn off the camcorder before removing the card!
Minimum System Requirements
Windows 2000, XP, Vista, 7, 8, Mac OS X (mass storage class)
Windows Media Player 9
Intel Pentium class computer
USB 2.0 port for hi-speed transfers and charging
Status
Without DC adapter
Green LED on: camcorder is booted up
Red LED on: no card, card failed, battery low, or card is full (not in circular recording)
Green LED flashing: normal recording
Green / Red LED intermittent flashing: battery low and recording
DC adapter plugged in
Red LED flashing: charging
Red LED on: no card, card failed, or card full (not in circular recording)
Orange / Green LED intermittent flashing: charging and recording
Green LED flashing: charging complete and recording
All LEDs off: charging complete and not recording
Connected to computer
Orange LED on: charging
Green LED on: charging complete
Package Contents
Please unpack your intelligent security camcorder and check that the following were included:
Foscam FHC790 intelligent security camcorder
5V DC Adapter
5V Car Adapter
USB 2.0 Cable
Quick Start Guide
Foscam FHC790 at a Glance
LED indicator
on/off
camera
USB port
surveillance mode
custom mode
On-the-GO mode
microphone
card slot
www.foscam.us
Foscam FHC790 Intelligent Security Camcorder Quick Start Guide
Mode switch
Switch between surveillance, on-the-go and custom modes. Default settings are in parentheses.
Note: For custom mode configuration, please use the PC software Widget to change
the settings. The widget can be downloaded from www.foscam.us/pc-software-widget. To
make the custom mode settings effective, please push the mode switch to the “custom
mode” position before powering up the FHC790.
Surveillance
Video Quality
Resolution
Frame Rate
Indoor Lighting
Condition
Day / Night Mode
Orientation
Time Stamp
Circular Recording
Split File Time (min)
Mic
LED On / Off
Voice-Trigger
Sensitivity
Vibration-Trigger
Sensitivity
Vibration Standby Mode
Motion-Trigger
Sensitivity
Auto On / Off
High
320x240
High
50Hz
Day mode
Normal
Enable
Enable
30
Enable
On
Disable
Disable
N/A
Disable
Disable
On-the-GO
High
640x480
High
50Hz
Day mode
Normal
Enable
Disable
15
Enable
On
Disable
Disable
N/A
Medium
Disable
Custom (default)
(High) / Medium / Low
640x480 / (320x240)
(High) / Low
(50Hz) / 60Hz
(Day mode) / Night mode / Auto
switching
(Normal) / Up-side-down
(Enable) / Disable
(Enable) / Disable
10 / (15) / 30
(Enable) / Disable
(On) / Off
High / Medium / Low / (Disable)
High / Medium / (Low) / Disable
Fast Wake Up / (Power Saving)
High / Medium / Low / (Disable)
Scheduled Recording /
Car-activate Recording /
Car-stop Recording /
Car-activate and Car-stop Re-
cording /
(Disable)
PC Software Widget
To synchronize the time and customize settings, download the PC software “Widget” from
www.foscam.us/pc-software-widget and follow the instructions in the software guide.
NOTE: If the time shown is year 2026 or beyond due to a loss of Real Time Clock,
recording time will not be shown on the video, even if timestamp is enabled. Please use
the widget to resync the time and delete files created in 2026 or beyond!
Connecting to computer
To
1
2
3
connect the camcorder to your computer, follow these instructions:
Connect the larger end of the USB cable into an available USB port on the computer.
Connect the smaller end of the cable into the USB port of the camcorder.
The camcorder will appear in My Computer as a drive.
Firmware upgrades
Foscam will from time to time release new firmware for enhancements or adding new features.
Visit www.foscam.us/firmware to check on the latest firmware for your FHC790.
Environmental Requirements
Storage temperature: 32˚ to 113˚F (0˚ to 45˚C)
Operating temperature: 32˚ to 113˚F (0˚ to 45˚C)
FCC Regulation
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause interference to radio or television reception, which can be deter-
mined by turning the equipment off and then on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1 Increase the separation between the equipment and camcorder.
2 Connect the equipment to a different outlet so that the equipment and camcorder are
on different branch circuits.
3 Consult the dealer or an experienced radio / TV technician for help.
When the FHC790 is connected to the lighter through the 5V car adapter and the auto on /off mode is selected:
Car-activated Recording: Auto-starts recording once the car is started, auto-stops recording when car is stopped.
Car-stop Recording: Auto-starts recording when car is stopped, auto-stops recording once car is started.
Car-activate and Car-stop Recording: Auto-starts recording once car is started and continues to record
even when the car is stopped. The camcorder needs to be turned off manually.
* For the longest recording time, set Video Quality to Low, Resolution to 320x240 and Frame Rate to Low. This way
the FHC790 can act as a digital voice recorder.
** If a recording is started, you cannot switch between modes.
*** If triggering is enabled, the FHC790 will record for 10 seconds after powering-up. Then it will go into standby. If there
is a trigger, it will keep recording until there are no further triggers. After that, it will record for 5 more minutes and
then standby again.
www.foscam.us
version: 1.0

Produktspezifikationen

Marke: Foscam
Kategorie: Überwachungskamera
Modell: FHC790

Brauchst du Hilfe?

Wenn Sie Hilfe mit Foscam FHC790 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Foscam

Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Foscam

Foscam FI9938P Bedienungsanleitung

6 Oktober 2024
Foscam

Foscam C2M Bedienungsanleitung

5 Oktober 2024
Foscam

Foscam R5 Bedienungsanleitung

4 Oktober 2024
Foscam

Foscam C2M-B Bedienungsanleitung

30 September 2024
Foscam

Foscam R2 Bedienungsanleitung

28 September 2024
Foscam

Foscam FI9816PB Bedienungsanleitung

28 September 2024
Foscam

Foscam V8P Bedienungsanleitung

4 September 2024
Foscam

Foscam SD4H Bedienungsanleitung

1 September 2024
Foscam

Foscam C5M Bedienungsanleitung

29 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024
Friedland

Friedland E895 Bedienungsanleitung

10 Oktober 2024