Focal Polyglass 165 V30 Bedienungsanleitung

Focal Lautsprecher Polyglass 165 V30

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Focal Polyglass 165 V30 (16 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
polyglass 165 V 30
U s e r M a n u a l
Congratulations on choosing Focal automobile speakers.
Focal speakers remain high quality products, due to the multitude of advanced
materials used. Detailed research and development in the laboratory, from
dedicated engineers and technicians, played a major role in producing such high
performing products. To gain the best results from your speakers, please ensure
you follow these recommendations. If not followed correctly any fault observed,
may not be covered by the guarantee.
Français page 6
the focal only guarantee applies if is page 15
ret urned to us wi th i n 10 days o f purcha se .
Technical advances, included in the Polyglass range
• Polyglass cones woofer
• TNB aluminum / magnesium inverted dome tweeter
• Separated crossover, fully optimised with adjustable level control. High quality components
used throughout.
• Butyl surround
Included
• 2 x midbass drivers
• 2 x grilles with support
• 2 x gaskets
• 2 x tweeters with grilles
• 2 x tweeter supports
• 2 x crossovers
• Fixing screws
Due to constant technological advances, Focal reserves its right to modify specifications without notice. Images may not conform exactly to specific product.
Focal® is a trademark of Focal-JMlab® - BP 374 - 108, rue de l'Avenir - 42353 La Talaudière
cedex - France - Tel. (+33) 04 77 43 57 00 - Fax (+33) 04 77 43 57 04 - www.focal-fr.com
Important recommendations
Before attempting any installation work, it is very important to verify how much space is
available to fit the speakers into the vehicle.
Key points:
• For direct replacement of original speakers, please check there is enough space for your
new Focal speakers and grilles.
• Ensure the speaker is clean from debris and metallic particles that maybe attached
(especially after drilling)
• Use the foam gasket supplied (inside the grille), for airtight placement of the speaker into
the panel.
• Do not touch the tweeter cone.
Choice of installation and positioning the tweeter
To achieve best results for your installation, please follow these simple guidelines
• Use a variety of speakers to achieve a large bandwidth, the most central possible.
• Speakers positioned in the most forward location possible, for correct staging.
• Tweeters positioned preferably high in the doors or in the dash (if space permitting),
to obtain un-muddled high and midrange frequencies. These being directive to the
listener.
• To position the tweeters direct in-line to the listeners ears, for improved imaging.
Prefered woofer and
mid-range positions.
3 x prefered tweeter
positions
polygl a ss 165 V 30
U s e r M a n u a l 2
Cables and connections
For best results with your speakers, we recommend you include the use of Focal cables.
Alternatively, other high quality cable can be used, if sufficient section thickness is available
(minimum thickness = 1mm2). This is particularly important for long lengths of cable to
ensure a strong efficient signal is maintained. Always ensure the polarity is respected, (+ is
connected to + and - is connected to -). Maintain correct connections, from principal source
radio / amplifier (left / right / front and rear), and crossover to speakers (tweeter to tweeter, mid
to mid, woofer to woofer), is always observed.
Connections
Fitting the tweeter
There are two mounting possibilities available: surface or flush mount. The tweeter arrives
supplied in its flush-mounting pod. Very carefully, remove the grille, by gently prizing it off
(using a paper clip will help). Don’t forget to put the grille back, it has a great impact on the
tweeter frequency response.
Surface mounting: choose the angle that best suits your installation (10° or 30°) and mount
the pod firmly using the screws supplied. Feed the wire through the hole in the pod and refit
the tweeter and grille in place.
Flush mounting: cut a neat 45mm diameter hole
in the panel where you want to place the tweeter.
Then with the metal mounting strip held from
behind (ensuring the ends are pointing towards
the hole), insert the screw through the flush-mount
pod from the front and tighten the two parts
together. Feed the wire through the hole in the pod
and refit the tweeter and grille in place.
polyglass 165 V 30
U s e r M a n u a l 3
Right Output
Left Output
Woofer
Tweeter
Woofer
Tweeter
Input
Input
Grille
Unlocking tool
Tweeter
Pod
Mounting strip


Produktspezifikationen

Marke: Focal
Kategorie: Lautsprecher
Modell: Polyglass 165 V30

Brauchst du Hilfe?

Wenn Sie Hilfe mit Focal Polyglass 165 V30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Focal

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-