Flymo EasiCut 610XT Bedienungsanleitung

Flymo Heckenschere EasiCut 610XT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Flymo EasiCut 610XT (10 Seiten) in der Kategorie Heckenschere. Dieser Bedienungsanleitung war fĂŒr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
EN Operator’s manual
Electric Hedge Trimmer
EasiCut 610XT 9671030-xx
Âź
Remark: “xx” stands for customer and country
variants. The basic product number is before the
hyphen.
Page 1 width 2 mm less: 208 mm
31610-85.960.01.indd 1
31610-85.960.01.indd 1
31610-85.960.01.indd 1
31610-85.960.01.indd 131610-85.960.01.indd 1 07.09.21 11:02
07.09.21 11:02
07.09.21 11:02
07.09.21 11:0207.09.21 11:02
Carton Contents
1
2
3
4
A
B
2
13
C
C
1
D
Fold-out Page width 5 mm less: 205 mm
2
31610-85.960.01.indd 2
31610-85.960.01.indd 2
31610-85.960.01.indd 2
31610-85.960.01.indd 231610-85.960.01.indd 2 07.09.21 11:02
07.09.21 11:02
07.09.21 11:02
07.09.21 11:0207.09.21 11:02
EN
1. SAFETY 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. INITIAL OPERATION 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. OPERATION 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. MAINTENANCE 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. STORAGE 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. TROUBLESHOOTING 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. DISPOSAL 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. TECHNICAL DATA 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9. SERVICE / WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Original instructions.
This product is not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the product by a per-
sonresponsible for their safety. Children should be supervised to ensure
that they do not play with the product. The use of this product by young
people under the age of 16 is not recommended.
Intended use:
The FLYMO Hedge Trimmer is intended to cut hedges, shrubs and grass
coverings in private domestic gardens and allotments.
The product is not intended for long term use.
DANGER! Risk of injury!
v Do not use the product to cut lawns / lawn edges, to chop up
material or to make compost.
Carton Contents:
1 Mains cable
2 Handguard
3 Blade cover
4 Operator’s manual
IMPORTANT!
Please check if the contents of the carton are correct BEFORE
assembling your new product.
IF ANY PARTS ARE MISSING CONTACT:
Husqvarna UK Ltd. Customer Service Department direct
Telephone: 0344 844 4558 UK 1800 882 350 ROI
Fax: 01325 302530
1. SAFETY
Important! Read the operator’s manual carefully before use and keep
for future reference.
If not used properly this product can be dangerous. The warnings and
safety instructions must be followed to ensure reasonable safety and
efficiency in using this product. The operator is responsible for following
the warnings and instructions in this manual and on the product. Never
use the product unless the guards provided by the manufacturer are in
the correct position.
Symbols on the product:
Read operator’s manual.
Wear safety glasses and ear protection.
Danger – Keep hands away from blade.
Do not let the product become wet with rain or other moisture.
Do not leave the product outdoors while it is raining.
Disconnect the mains cable if the cable becomes damaged
or cut.
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and / or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adaptor plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord
s uitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and / or battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tools may
result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and col-
lection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source and / or the battery pack
from the power tool before making any adjustments, changing acces-
sories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5) Service
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is maintained.
4
Page 2 width 2 mm less: 208 mm
31610-85.960.01.indd 4
31610-85.960.01.indd 4
31610-85.960.01.indd 4
31610-85.960.01.indd 431610-85.960.01.indd 4 07.09.21 11:02
07.09.21 11:02
07.09.21 11:02
07.09.21 11:0207.09.21 11:02


Produktspezifikationen

Marke: Flymo
Kategorie: Heckenschere
Modell: EasiCut 610XT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Flymo EasiCut 610XT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Heckenschere Flymo

Bedienungsanleitung Heckenschere

Neueste Bedienungsanleitung fĂŒr -Kategorien-