FLIR Summit DBV54DL Bedienungsanleitung

FLIR Sicherheitskamera Summit DBV54DL

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für FLIR Summit DBV54DL (2 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Product Information
User Manuals Quick Start Guides
Specification Sheets
Video Tutorials & DemosLatest News
1 x Flat-head Screwdriver
Contents
700+ TVL VARIFOCAL
OUTDOOR IR DOME CAMERA
MODEL: DBV54DL
QUICK START GUIDE
English Version 1.0
www.digimerge.com
IT’S ALL ON THE WEB!
www.digimerge.com
VISIT
Digimerge Technologies Inc.
Copyright © 2013
As our products are subject to continuous improvement, Digimerge
reserves the right to modify product design, specifications and prices,
without notice and without incurring any obligation. E&OE
1 x Weatherproof IR Dome
Camera with Varifocal Lens
1 x Hex Allen Key
Features
Safety Precautions
• Use an appropriate low voltage power cable to prevent
fire or electrical shock.
• Make sure to install the camera in an area that can
support the camera weight.
• There are no user serviceable parts inside the camera.
Please do not disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning
material. Please use a soft cloth to clean the lens cover.
2 x Rubber Weatherproofing Plugs
4 x Mounting Screws
• 1/3” Sony EXview™ II 960H with Effio DSP / 700+ TVL
• Superior Low Light Sensitivity
• Advanced Digital Noise Reduction
• Smart IR Night Vision (100ft/30m)*
• 2.8–12mm Varifocal Auto Iris Lens
• External Zoom / Focus Adjustment
• IP66 Weatherproof Rating**
• 3-Axis Design for Wall/Ceiling Mounting
• Vandal Resistant
* IR Illumination range under ideal conditions. Objects at or beyond
this range may be partially or completely obscured, depending on the
camera application.
** Not recommended for submersion in water.
Flat-head Screwdriver
Image Sensor 1/3” Sony EXview HAD™ II 960H
Video Format NTSC
Effective Pixels H: 976 V: 494
Horizontal Resolution 700+ TVL
Scan System 2:1 Interlace
Sync System Internal
S / N Ratio > 48dB
Iris AES
AES Shutter Speed 1/60 ~ 1/100,000 sec.
Min. Illumination 0.1 LUX (IR Off)
0 LUX (IR LEDs On)
Video Output Composite 1.0Vpp @ 75ohm
Lens Focal Length / Type 2.8–12mm / VarifocalF1.4
FOV (Diagonal) 33–104°
Termination Video: BNC Female
IR Range / Qty. 100ft / 30m; 36 IR LED’s
Power Requirement 12V DC ± 10%
Power Consumption 450mA MAX with IR LED
Operating Temp. Range 14° ~ 122°F / –10° ~ 50°C
Environmental Rating IP66
Dimensions Diameter: 4.8” (121mm)
Height: 3.4” (86mm)
Weight (including stand) 1.4lbs / 0.6kg
Dimensions
Camera Specifications
121mm / 4.8”
86mm / 3.4”
Camera Base
To install the camera:
1. Use the included Allen key to loosen the dome cover
from the camera base.
2. Rotate the camera base counterclockwise to separate
it from the ball camera and dome cover.
3. Feed the BNC / power cable through the camera
base.
4. Connect the video and power cable as described in
the next section ‘Setting up the Camera’.
5. Mount the camera base to the wall or ceiling using the
included screws.
6. Position the dome cover over the camera and screw it
clockwise halfway onto the camera base.
7. Move the ball camera to the desired position. While
holding the ball camera firmly in place, screw the
dome cover the rest of the way to secure it to the
camera base. Holding the camera prevents it from
moving while installing the dome cover.
8. Use the included Allen key to tighten the dome
cover.
Zoom
Focus
Installing the Camera
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the camera(s) and
cables to the DVR.
Setting up the Camera
1. Connect the BNC connector of the camera
to the video cable.
2. DC Power— : Connect a Power Adapter
12V DC Power Adapter (not included) to
the camera. Plug the Power Adapter into a
local power outlet.
• DC Power— (not included): Power Pigtail
Connect a Power Pigtail to the camera.
Connect the terminating wires of the cable
directly to the DC power source.
NOTE: For pigtail connection with 12V DC, make sure to
check polarity specifications on the power adapter.
3. Use the included flat-head screwdriver
to adjust the ZOOM and FOCUS control
screws as required.
4. Insert rubber weatherproofing plugs
(2x) firmly into the ZOOM and FOCUS
screw-holes to ensure a weatherproof
seal.
Ensure that both the
ZOOM and FOCUS
screw-holes are covered.
Weatherproofing
Plugs
WARNING - A REGULATED UL / CSA APPROVED 12V DC power
supply is REQUIRED for use with this camera. Use of a non-regulated,
non-conforming power supply can damage this product and voids the
warranty.

Produktspezifikationen

Marke: FLIR
Kategorie: Sicherheitskamera
Modell: Summit DBV54DL

Brauchst du Hilfe?

Wenn Sie Hilfe mit FLIR Summit DBV54DL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sicherheitskamera FLIR

FLIR

FLIR M625CS Bedienungsanleitung

26 Mai 2024
FLIR

FLIR DNV14UX2 Bedienungsanleitung

25 Mai 2024
FLIR

FLIR FC-332 ID Bedienungsanleitung

22 Mai 2024
FLIR

FLIR SyncroIP DNE12TL22 Bedienungsanleitung

17 Mai 2024
FLIR

FLIR N133BD Bedienungsanleitung

16 Mai 2024
FLIR

FLIR AX8 Bedienungsanleitung

5 Mai 2024
FLIR

FLIR FC-645 Bedienungsanleitung

27 April 2024
FLIR

FLIR F-612E Bedienungsanleitung

25 April 2024
FLIR

FLIR MPX C233BC Bedienungsanleitung

13 April 2024
FLIR

FLIR PT-124 Bedienungsanleitung

9 April 2024

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung für -Kategorien-

Speco Technologies

Speco Technologies O2PTZ34D5W Bedienungsanleitung

14 August 2024
ZKTeco

ZKTeco BL-34F26L Bedienungsanleitung

11 August 2024
Moxa

Moxa VPort 26 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 36 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L54160N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort P06 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPORT P06-1MP-M12-CAM80 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-DO-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 26A-1MP Bedienungsanleitung

27 Juni 2024