First Alert 2602DF Bedienungsanleitung

First Alert Überwachungskamera 2602DF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für First Alert 2602DF (5 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/5
2601DF | 2602DF | 2603DF
MANUAL # M08-0505-004
MANUAL # M08-0505-004
www.FirstAlert.com
Waterproof Fire Safe
Operation & Installation Guide
21
INDEX
Proper Use of Your Safe 1 ...............................................................................................
Opening Your Safe for the First Time ................................................................3-4
Programming a Personal Passcode ........................................................................4
Safe Care & Maintenance / Consumer Affairs 5-6 .................................................
Safe Identification Record ..........................................................................................6
Ordering Replacement Entry Keys ..........................................................................7
Limited Warranty ..........................................................................................................8
Congratulations!
Your new First Alert® Waterproof Fire Safe will provide years of secure storage for
valuables and important documents. This safe has been built with the highest
manufacturing standards to ensure maximum user satisfaction. With proper care,
your First Alert® safe will provide peace of mind for many years to come.
PACKAGE CONTENTS
PROPER USE OF YOUR SAFE
First Alert® Waterproof Fire Safes protect paper records and other valuable
documents. UL testing shows that the interior temperature remains below
350°F for 30 minutes during a fire up to 1550° F. Your safe is protected by
our Lifetime After Fire Replacement Guarantee. Please see details in that
section on page 8.
Waterproof – Your new First Alert® Waterproof Fire Safe is designed
to help protect your valuables from fire and water. This product has
been validated to be waterproof when fully submerged for up to 1
hour and is not intended for long term underwater exposure.
Moisture Warning
We recommend that you place delicate items such as pictures or
intricate jewelry into an air-tight container before storing them in
your safe. Avoid placing your safe in areas of high humidity. For
optimum performance, the safe should be opened and aired out for
at least 20 minutes every two (2) weeks.
Firearms Warning
This safe is not designed to store medication, items with
combustible content, guns or other weapons.
To clean your safe, wash off with a damp cloth and dry. Never use paint thinners
or chemical solvents, as they can permanently damage the finish.
FOR YOUR PROTECTION
a Always store keys away from safe, NEVER INSIDE.
a Record all safe identification numbers on Safe Identification Record on page 6.
a Save this manual and NEVER keep it inside the safe. DO NOT DISCARD!
IMPORTANT: ALWAYS STORE SAFE FLAT
Index / Proper Use of Your Safe Proper Use of Your Safe
1
HOUR
1 First Alert® Waterproof Fire
Resistant Safe
MANUAL
1 Operation &
Installation Guide 2 Entry Keys
4 AA Batteries Always store your safe in a flat,
horizontal position so that
the contents remain protected
during a fire. Storing the unit on
the sides or ends WILL NOT
PROTECT CONTENTS during a fire.
43
Closing Your Safe
1 Close the lid, making sure that the contents do not obstruct the seal. Place the
keys in a secure place away from the safe.
2 Push the latch back and down onto the lid clasp and snap the latch into the
closed position.
3 Your safe is now locked.
PROGRAMMING A PERSONAL PASSCODE
For security reasons, it is very important that you program your own personal
passcode into the digital lock. The factory code should be changed immediately.
To program your own unique four to eight (4-8) digit passcode, follow these steps:
1 Open the safe using the key or the five (5) digit
passcode followed by the * key.
2 Lift the lid and locate the reset button cover.
3 Using a small Phillips screwdriver, remove the two
screws and cover.
4 Press the black reset button. The LED will flash
yellow.
5 Enter your new 4-8 digit passcode followed by the * key.
6 Reenter the new passcode again and press the * key.
7 If both entries match, the green LED will light up for 2 seconds indicating that
your new passcode has been successfully programmed. If both entries do not
match, the red LED will light up for 2 seconds and you will have to repeat steps
4-7.
8 Use a Phillips screwdriver to replace the two screws and cover.
Opening Your Safe for the First Time / Opening & Closing Your Safe
OPENING YOUR SAFE FOR THE FIRST TIME
Batteries and Keys
Remove four (4) batteries and two (2) Entry Keys. They are located in the packing
material. Remove them before discarding the box.
Installing Batteries
1 Locate the battery cover on the top of the lid.
2 Slide the cover off the battery compartment.
3 Properly insert batteries, noting the +/- directions. The LED on top of the lid
will blink red and green three (3) times.
4 Replace cover and close the lid.
NOTE: Clean the battery contacts in the battery compartment and on the
batteries before installing new batteries.
The pre-set factory code for your safe is:
OPENING & CLOSING YOUR SAFE
Opening Your Safe with the Keypad
1 Enter the factory pre-set code 1-2-3-4-5 followed by the * key.
2 After properly entering the entire sequence, the green light will turn on and
the locking latch will open and spring forward.
3 Lift the safe lid.
NOTE: If an incorrect code is entered in a row, the lock will automatically 3 TIMES
shut down for before it can be opened again using the correct code. 4 MINUTES
During this delay, the key can be used to open the safe. If an incorrect code is
entered, the red light will blink one time and you will hear 3 fast beeps.
Opening Your Safe with the Key
1 Insert the key into the lock and then turn counterclockwise (to the left).
2 The locking latch will open and spring forward.
3 Press and turn the key clockwise (to the right) to remove.
4 Lift the lid to open the safe.
Programming a Personal Passcode
*
21 3 4 5

Produktspezifikationen

Marke: First Alert
Kategorie: Überwachungskamera
Modell: 2602DF

Brauchst du Hilfe?

Wenn Sie Hilfe mit First Alert 2602DF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera First Alert

First Alert

First Alert DWC-400 Bedienungsanleitung

25 August 2024
First Alert

First Alert D-575 Bedienungsanleitung

25 August 2024
First Alert

First Alert DWS-472 Bedienungsanleitung

25 August 2024
First Alert

First Alert P-520 Bedienungsanleitung

24 August 2024
First Alert

First Alert DWS-471 Bedienungsanleitung

22 August 2024
First Alert

First Alert HS-4700-S Bedienungsanleitung

21 August 2024
First Alert

First Alert DWS-401 Bedienungsanleitung

20 August 2024
First Alert

First Alert DWIP-720 Bedienungsanleitung

19 August 2024
First Alert

First Alert DWB-700 Bedienungsanleitung

18 August 2024
First Alert

First Alert CMD1080P-AH Bedienungsanleitung

15 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024