Fellowes Powershred HS-660 Bedienungsanleitung

Fellowes Aktenvernichter Powershred HS-660

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fellowes Powershred HS-660 (8 Seiten) in der Kategorie Aktenvernichter. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
Quality Office oducts Since 1917Pr
POWERSHRED
® HS-660
Please read these instructions before use.
Do not discard: keep for future reference.
Veuillez lire ces instructions avant d’utiliser l’appareil.
Ne pas jeter : conserver afin de consulter les directives
ultérieurement, en cas de besoin.
Lea estas instrucciones antes del uso.
No las deseche: consérvelas como referencia futura.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keepawayfromchildrenandpets.Keephandsawayfrom
paper entry. Always set to off or unplug when not in use.
• Keepforeignobjects–gloves,jewelry,clothing,hair,
etc.–awayfromshredderopenings.Ifobjectenterstop
opening, switch to Reverse ( ) to back out object.R
• Neveruseaerosolproducts,petroleumbasedlubricantsor
other flammable products on or near shredder. Do not use
canned air on shredder.
• Donotuseifdamagedordefective.Donotdisassemble
shredder. Do not place near or over heat source or water.
• ThisshredderhasaDisconnectPowerSwitch(C)inthedoor.Thedoor
must be closed to operate shredder. In case of emergency, open door.
This action will stop shredder immediately.
• Avoidtouchingexposedcuttingbladesundershredderhead.
• Shreddermustbepluggedintoaproperlygroundedwalloutletor
socket of the voltage and amperage designated on the label. The
grounded outlet or socket must be installed near the equipment and
easily accessible. Energy converters, transformers, or extension cords
should not be used with this product.
• Donotoperatethemachinewithoutthesafetyflapclosed(A).
Will shred: Paper only
Will not shred: Adhesive labels, continuous form paper, transparencies,
newspaper, junk mail, credit cards, CD/DVDs, staples, paper clips,
cardboard, laminates, file folders, X-rays or plastic other than noted above
Paper shred size:
High Security Micro-Cut (Din 6) 1/32 in. x 3/16 in. (0.8mm x 5.0mm)....
Maximum:
Sheets per pass ...................................................................................6*
Paper entry width 10-1/4 in. (260mm) ....................................................
* 8.5 in. x 11 in., 20lb., (75g) paper at 120V, 60 Hz, 8 Amps; heavier paper,
humidity or other than rated voltage may reduce capacity. Recommended
maximum daily usage rates: 3,000 sheets per day. 6 sheets per pass.
* In order to perform at capacity, shredder must be plugged into
a dedicated 15Amp, 120V outlet and auto oil system must
be engaged.
H. Control Panel and LEDs
1. ON/OFF
R
2. Reverse
3. Bin full
4. Door open
5. Safety Flap Open
6. Low oil
7. Auto oil complete
A. Safety Flap
B. Paper entry
C. Disconnect switch (open door)
D. Door
E. Basket - paper (inside)
F. Casters
G. See safety instructions
2
ENGLISH
Model HS-660
KEY
INDICATOR LIGHTS
CAPABILITIES
ADVANCED PRODUCT FEATURES
A
.
B.
G.
H.
F.
E.
D.
C.
R
Stops automatically
when door is
opened. Symbols
flash alternately
Stops automatically
when bin is full.
Empty bag when
bag full indicator
lights up
Stops automatically
if too much
paper is inserted.
Automatic reverse
if paper jams
Stops automatically
if safety flap is
opened. Symbols
flash alternately
Overload protection.
Machine stops to cool
down- approx. 10-15
minutes. Symbols
flash alternately
Cutting shafts are
automatically oiled Oil bottle is empty
Sleep Mode
Energy saving feature shuts down
the shredder after 1 hour of inactivity
Auto Oil™
Lubricates the cutters automatically to enhance
performance and extend shredder life
SHREDDER SET-UP
OILING SET-UP
PAPER
Ensure access
to a dedicated
15Amp, 120V
outlet
R
41 3
R
2
Open the door
1 2 34
or
5
3
BASIC SET-UP BASIC SHREDDING OPERATION
Place cutter head
into top of cabinet,
use 2 people
Plug in and make
sure door is closed Press ( ) ON to
activate When finished
shredding set to
( ) OFF
Feed paper
straight into paper
entry and release
Do nothing and
shredder will go
automatically to
sleep mode after
1 hour
Make sure safety
flap is securely
in place
•Emptywastebasketwhenbinfullindicatorlightsup.
•Shredderwon’trunifthedoorisopen,orbinneedstobeemptied.
•Maintenanceisanimportantpartofprotectingyourinvestment.Don’tforgettopurchaseouroil(3505801 3604101) and shredder bags ( ).
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
LIMPIEZA DE LOS SENSORES INFRARROJOS DE INICIO AUTOMÁTICO
Eliminates frustrating jams by preventing overloads.
Remove lid
from oil bottle Put oil tube into oil
bottle and screw
stopper on
Place oil bottle
into oil holder on
side if cabinet
Close door. Plug
into socket-outlet Oil pump starts
automatically on
first use. To stop Oil
Indicator ( ) from
blinking red, press
ON ( ) after 15
seconds
After changing oil
bottle, press Reverse
(R) until Oil Indicator
( ) no longer
blinks red
R
R
5 6 7 84321
Hook oil
bottle holder
into side of
cabinet
Remove oil bottle
holder from
cabinet
SHEET CAPACITY GAUGE
PAPER JAM
TROUBLESHOOTING and PREVENTIVE MAINTENANCE
SLEEP MODE
CLEANING AUTO-START INFARED SENSORS
Electronically measures paper thickness to prevent
paper jams:
R
Up to RED: Too many sheets have been
inserted. Automatic reverse of paper.
Up to YELLOW: Maximum sheet capacity.
Up to GREEN: Normal sheet capacity
during shredding process.
3
In sleep mode To get out of sleep
press ON ( ) insert paper
or
R
2
1
WHEN IN SLEEP MODE
Set to Off ( ) and empty bin. Replace bin and follow the below
procedures.
Stops automatically
if too much paper
is inserted.
Automatic reverse
if paper jams
23
Gently pull uncut
paper from
paper entry.
Machine runs for
a short time in
reverse. Repeat if
necessary
1
Shred One Sheet
Paper detection sensors are designed for maintenance free operation. However, on
rare occasions the sensors may become blocked by paper dust causing the motor to
run even if there is no paper present (Note: two paper detection sensors are located in the center
of the paper entry).
Turn off and
unplug shredder Locate Auto-start
infared sensor Clean any
contamination from
the paper sensors
123 4
Use thin, long-handled
brush to clean sensors.
Make sure brush is
clean and dry
TO CLEAN THE SENSORS

Produktspezifikationen

Marke: Fellowes
Kategorie: Aktenvernichter
Modell: Powershred HS-660

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fellowes Powershred HS-660 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Aktenvernichter Fellowes

Fellowes

Fellowes Powershred 79Ci Bedienungsanleitung

16 Oktober 2024
Fellowes

Fellowes Powershred C-525 Bedienungsanleitung

8 Oktober 2024
Fellowes

Fellowes Powershred 225i Bedienungsanleitung

5 Oktober 2024
Fellowes

Fellowes MicroShred MS-450Cs Bedienungsanleitung

29 September 2024
Fellowes

Fellowes P-35C Powershred Bedienungsanleitung

24 September 2024
Fellowes

Fellowes Powershred 1200C Bedienungsanleitung

22 September 2024
Fellowes

Fellowes DS-12CS Bedienungsanleitung

17 September 2024
Fellowes

Fellowes Intellishred PS-79Ci Bedienungsanleitung

15 September 2024
Fellowes

Fellowes Powershred HS-1010 Bedienungsanleitung

13 September 2024
Fellowes

Fellowes C-480 Bedienungsanleitung

6 September 2024

Bedienungsanleitung Aktenvernichter

Neueste Bedienungsanleitung für -Kategorien-

IDEAL

IDEAL 2601 Bedienungsanleitung

15 Oktober 2024
Hama

Hama CCD 1018L Bedienungsanleitung

14 Oktober 2024
SEM

SEM 1324C/3 Bedienungsanleitung

13 Oktober 2024
Insignia

Insignia NS-PS10CC Bedienungsanleitung

13 Oktober 2024
Tracer

Tracer TRX-503 Bedienungsanleitung

13 Oktober 2024
Tracer

Tracer TRX-119 Bedienungsanleitung

11 Oktober 2024
Rexel

Rexel V20 Bedienungsanleitung

11 Oktober 2024
Hama

Hama CC 614L Bedienungsanleitung

6 Oktober 2024
Eliet

Eliet Minor Bedienungsanleitung

19 September 2024
Atika

Atika AMF2500W Bedienungsanleitung

19 September 2024