EverFocus EZ610/MVB Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EverFocus EZ610/MVB (32 Seiten) in der Kategorie Bewakingscamera. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
Installation / Operation Instructions
E
EZ
Z6
61
10
0
L
Lo
ow
w
L
Li
ig
gh
ht
t
I
In
nl
li
in
ne
e
I
IP
P6
66
6
B
Bu
ul
ll
le
et
t
C
Ca
am
me
er
ra
a
EverFocus
2
2
2
22
E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
P/N: 4605XZ0610001AR
Operation Instruction
© 2010 EverFocus Electronics Corp
Please read this manual first for correct installation and operation. This manual should be retained for
future reference. The information in this manual was current when published. The manufacturer reserves
the right to revise and improve its products. All specifications are therefore subject to change without
notice.
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in
any form or by any means without written permission of the EverFocus Electronics Corporation.
3
3
3
33
Precautions
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and
audio speakers since the electromagnetic fields generated from these devices may distort the
video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or
other damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight or may cause permanent damage to the sensor and/or
internal circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in
electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove
any dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean
the sensor and the camera lens. Please do not use complex solvents, corrosive or abrasive
agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings.
Use the camera at temperatures within -40°C ~ 50°C (-40°F~122°F) and in an IP66 complaint
environment; this device is not rated as submersible. The input power source is 12VDC/24VAC.

Produktspezifikationen

Marke: EverFocus
Kategorie: Bewakingscamera
Modell: EZ610/MVB

Brauchst du Hilfe?

Wenn Sie Hilfe mit EverFocus EZ610/MVB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewakingscamera EverFocus

Bedienungsanleitung Bewakingscamera

Neueste Bedienungsanleitung für -Kategorien-