EverFocus ECMD200 Bedienungsanleitung

EverFocus Überwachungskamera ECMD200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EverFocus ECMD200 (10 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/10
Covert Color Camera in
Working PIR Motion Detector Case
Operation Instructions
Model No. ECMD200
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image or
otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introduction of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits, as well as creating unbalanced illumination beyond the capability of the camera to
compensate.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands. Touching a wet power cord with your hands or touching the power cord with wet hands
may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
1
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the
hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera
lens. Use a damp soft cloth to remove any dirt from the camera body. Please do not use complex
solvents, corrosive or abrasive agents for cleaning of any part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
This camera is suitable for indoor operation only. Use the camera at temperatures within
-10°C~50°C (14°F~122°F) and humidity between 20%~ 80%; this device is not rated as submersible.
The input power source is 12VDC. Be sure to connect the proper + / - polarity and voltage, as
incorrect polarity or too high a voltage will likely cause the camera to fail, and such damage is
not covered by the warranty. The use of properly fused or Class 2 power limited type supplies is
highly recommended.
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera plus any
wind, snow, ice or other loading, and securely attach the camera to the mounting surface using screws
and anchors which will properly support the camera. If necessary (e.g. when mounting to drop ceilings)
use a safety wire to provide additional support for the camera.
OVERVIEW
The ECMD200 is a working PIR motion detector with a hidden color camera which utilizes a
Sony 1/3” Super HAD II CCD Sensor and advanced DSP solution for excellent light
sensitivity. providing well defined color and B/W video for surveillance applications. The
PIR sensor can be connected to an alarm system, light control, recording device or other
application. The camera is concealed within the device and enables surveillance of the
monitored area without reveling the fact that the area is under camera surveillance. The two
security systems combine to give improved protection in the desired area. A stylish design
combined with low current consumption delivers an excellent combination of intrusion
detection protection, image quality, value and performance.
2
FEATURES
Camera:
Color camera with SONY 1/3” Super HAD II CCD sensor
Employs Digital Signal Processor (DSP) chip-set for high quality images
High Resolution over 600TVL
High sensitivity, low smear, high anti-blooming and high S/N ratio for high
performance video.
Built-in functions: Auto Electronic Shutter (AES), Auto Gain Control (AGC), Auto
Trace White Balance (ATW) Digital Wide Dynamic Range (DWDR), 2D Noise
Reduction (2DNR).
DC power cable and video cable and power pigtail provided
Built-in anti-aliasing function to improve perceived video image quality
PIR Motion Detector:
PIR motion sensor for intrusion protection with minimum false alarm ratio.
Adjustable sensitivity level
Adjustable relay time 2-40 sec.
Selectable 2 choices for pulse detection options
Built-in anti tamper switch
PACKAGE CONTENTS
PIR Detector with Hidden Camera Unit x 1
Mounting Bracket x 1
Operation Instructions (this document) x 1
Power adapter pigtail x 1
Screws x 2

Produktspezifikationen

Marke: EverFocus
Kategorie: Überwachungskamera
Modell: ECMD200

Brauchst du Hilfe?

Wenn Sie Hilfe mit EverFocus ECMD200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera EverFocus

EverFocus

EverFocus EZN7221 Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EBD935 Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EBD430 Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EM900FP4 Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EDN468ME Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EHD300 Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EI350 Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EQ300E Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EBH5241 Bedienungsanleitung

21 August 2024
EverFocus

EverFocus EZN1160 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024