Epson PixiePlus Control System Bedienungsanleitung

Epson Beamer PixiePlus Control System

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Epson PixiePlus Control System (24 Seiten) in der Kategorie Beamer. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
PixiePlus™
Projector Controller for Epson®
Installation Guide
(Decora™ wall plate not included)
ELPSP10
Patent US 7,334,067
1
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is
provided for your safety. When the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING - To Reduce the Risk of Fire Or Electric Shock, Do
Not Expose This Apparatus To Rain Or Moisture. Apparatus
shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the
apparatus.
Electrical Warning
The PXE-DCM+ is a low-voltage device. Never install the
PixiePlus in an electrical back box containing high-voltage
wiring. This would cause a serious electrical danger and violate
United States national electrical codes.
I. Introduction
Preconfigured for Easy Setup
The PixiePlus (PXE-DCM+) Projector Controller for Epson®
(ELPSP10) is a single-gang AV control device configured to
provide power, source selection, and volume control of any
compatible Epson projector with RS-232. Users who wish to
control an Epson projector with the Projector Controller’s
preconfiguration may disregard the PixiePlus programming
instructions.
If it is necessary to reprogram the PixiePlus, the modular button
interface and IR device control codes may be easily reconfig-
ured. Modifying the RS-232 commands programmed to each
button requires the SP Controls Programming Wand
(PXE-PGM-TOOL, sold separately).
The PixiePlus may be configured with an Inactivity Shutdown
Timer (pg. 15) to protect bulb life, or with a Security Lock (pg.
16) to prevent unauthorized use. One PixiePlus may be used to
control multiple projectors in tandem with a parallel wired extra
emitter (sold separately).
The PixiePlus may be configured with schedule events (security
lock, auto power off, etc.) at specific times and date ranges
using the PXE-DCM-RTC Real Time Clock Module (not
included). Configuration of schedule events requires the SP
Controls Programming Wand (PXE-PGM-TOOL, sold
separately). See Programming Wand documentation for
schedule configuration instructions.
2
Mounting Screws
Learning Mode
Activation Switch
Status LED
IR Learning
Window
PixiePlus Board
Insert Modules
IR Transmitter


Produktspezifikationen

Marke: Epson
Kategorie: Beamer
Modell: PixiePlus Control System

Brauchst du Hilfe?

Wenn Sie Hilfe mit Epson PixiePlus Control System benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beamer Epson

Bedienungsanleitung Beamer

Neueste Bedienungsanleitung für -Kategorien-