EnGenius ESR-1220 Bedienungsanleitung

EnGenius Router ESR-1220

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EnGenius ESR-1220 (5 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 39 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

EnGenius Quick Start Guide ESR-1220 Wireless Broadband Router

Quick Start Guide v.1.2 ESR-1220 Wireless Broadband Router 1

Please refer to the User’s Manual in the CD-ROM for complete instructions.

he ESR-1220 Wireless Broadband Router operates seamlessly in

the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz,

11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbpswireless

standard. High output power and high sensitivity can extend range and

coverage to reduce the roaming between APs to get more stability

wireless connection. It also can reduce the expense of equipment in the

same environment. To protect your wireless connectivity, this device can

encrypt all wireless transmissions through 64/128-bit WEP data

encryption and also supports WPA2/WPA/802.1x for powerful security

authentication. The MAC addresses filter lets you select exactly which

stations should have access to your network.

Front Panel

Real Panel

Label Description

LAN Ports (1 – 4) Use an Ethernet cable to connect each port to a computer on your Local

Area Network (LAN).

WAN Port Use an Ethernet cable to connect this port to your WAN router.

DC Connector Use the power cable and connect the adapter to the power socket on the

wall, and the DC inlet into the DC connector.

Antenna Connector Connect the omni-directional antenna to the SMA connector.

Connection / Activity

LED

This LED will light up once an Ethernet cable is connected to one of the

LAN ports.

WAN LED This LED will light up once an Ethernet cable is connected to WAN

(Internet) port.

WLAN LED This LED will light up once the RF (wireless LAN) feature is enabled

Power LED This LED will light up once the power cable is connected to the DC

connector.

EnGenius Quick Start Guide ESR-1220 Wireless Broadband Router

Quick Start Guide v.1.2 ESR-1220 Wireless Broadband Router 2

Please refer to the User’s Manual in the CD-ROM for complete instructions.

Hardware Installation

1. Place the unit in an appropriate place after conducting a site survey.

2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook.

3. Plug one end of another Ethernet cable to WAN port of the device and the other end into you cable/DSL

modem (Internet)

4. Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the power socket

on the wall.

IP Address Configuration

The default IP address of the device is 192.168.1.1 In order to log into this device, you must first configure the

TCP/IP settings of your PC/Notebook.

1. In the control panel, double click Network

Connections and then double click on the

connection of your Network Interface Card (NIC).

You will then see the following screen.

2. Select Internet Protocol (TCP/IP) and then click

on the Properties button. This will allow you to

conﬁgure the TCP/IP settings of your

PC/Notebook.

3. Select Use the following IP Address radio

button and then enter the IP address (192.168.1.21) and

subnet mask (255.255.255.0). Ensure that the IP address and subnet mask are on the same subnet as the

device.

4. Click on the OK button to close this window, and once again to close LAN properties window.

Logging In

1. To configure the device through the web-browser,

enter the IP address of the device (192.168.1.1) into

the address bar of the web-browser and press Enter.

2. After connecting to the IP address, the web-browser

will display the login page. Specify admin for both the

User Name and Password and then click on the

3. Once you have logged in, you man configure the

WAN, LAN and Wireless settings. Please refer to the

user’s manual in the CD-ROM to configure these

parameters.

EnGenius Quick Start Guide ESR-1220 Wireless Broadband Router

Quick Start Guide v.1.2 ESR-1220 Wireless Broadband Router 3

Please refer to the User’s Manual in the CD-ROM for complete instructions.

Administrator Settings

1. Before you commission the device it

is necessary to change the default

user name and password. Click on

the Password link under the

Management navigation menu.

2. Specify a new user name.

3. Specify a new password and then re-

type the password in the next field for

confirmation.

4. Click on the Apply Changes to save the new user name and password. Use the new settings to log into the

device in the future.

LAN Settings

1. Click on the LAN Interface link on the

navigation drop-down menu. This feature

allows you to configure the LAN interface

using a static IP address or as a DHCP

server/client. This IP address is also used

to access the web-based interface.

2. IP Address: Enter an IP address for this

device.

3. Subnet Mask: Enter the subnet mask for

this IP address.

4. Default Gateway: Enter the IP address of

the default gateway.

5. DHCP-Static IP: If you use a Static IP

address, select Disabled from the drop-

down list.

6. DHCP Client: If you select DHCP Client,

you are not required to enter the rest of

the fields, as the IP address will be

provided to the device by the AP or DHCP

server

7. DHCP Server: If you select DHCP Server from the drop-down list. This device will act as a DHCP server and

assign IP address to it clients.

8. Click on the Apply Changes to save the changes.

Note: If you change the IP address here, you may need to adjust your PC’s network settings to access the

network again. The computers (and other devices) connected to your LAN also need to have their TCP/IP

configuration set to DHCP or Obtain an IP address automatically. Please refer to the user’s manual in the CD-

ROM to conﬁgure the advanced settings.

Produktspezifikationen

Marke:	EnGenius
Kategorie:	Router
Modell:	ESR-1220
Produktfarbe:	Weiß
Betriebstemperatur:	-10 - 50 °C
Zertifizierung:	FCC Part 15/UL, ETSI 300/328/CE
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	4
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 70 °C
Energiebedarf:	90 - 240V DC 12 V/ 1.3A
Anzeigelicht:	Ja
Abmessungen (BxTxH):	160 x 100 x 40 mm
Filterung:	Ja
MAC Adressen Filtern:	Ja
DHCP-Client:	Ja
DHCP-Server:	Ja
Modulation:	16-QAM, DQPSK, QPSK
xDSL-Verbindung:	Nein
Datenübertragungsrate:	54 Mbit/s
Luftfeuchtigkeit (außer Betrieb):	5 - 95 %
Max. Datenübertragungsrate:	0.05 Gbit/s
Datenrate:	54/48/36/24/18/12/9/6 Mbit/s
ISDN Anschluss:	Nein