Energy Sistem Linnker 5000 Bedienungsanleitung

Energy Sistem Kopfhörer Linnker 5000

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Energy Sistem Linnker 5000 (4 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
User’s Guide
1.Assemble and disassemble the ear-hook
with the Headset
(1)To assemble the ear-hook with the
Headset, push the toggle of the ear-phone
into the pin-hole of the ear-hook. To disassemble the ear-hook with the Headset, just
turn and pull out the toggle of the ear-phone from the pin-hole of the ear-hook.
(Please refer to Fig.1)
(2)Fit the ear-hook with your right or left ear. (Please refer to Fig.2, Fig3, Fig4, and
Fig.5)
Fig.1 Fig.2 Fig.3 Fig.4 Fig.5
2.Charging the battery:
(1)The Plug the travel charger into the AC outlet and then connect the charger
into the DC input of the headset. The red indicator of the
headset will light on. When the battery is full, the red
indicator will be off. Disconnect the adaptor from the headset.
When the battery is new, it is not fully charged. It takes nearly
4 hours to fully charge the battery. Afterwards, it will take
nearly 2 hours to fully charge the battery.
(2)If there is a USB charging cable included (optional), you
can charge the headset with the USB charging cable. Please
plug one end of USB charging cable to USB slot of your Fig.6
computer, another end to DC input of the headset. The following
is the same with the travel charger.
(Please refer to Fig.6.)
3.Turning the headset on or off:
(1)Press the “Button 1” for nearly 3 seconds.
You will hear two beep sounds and the blue
indicator will begin to flash. The headset is now
powered on.
(2)When the power is on, press the “Button 1”
for 3 seconds. You will hear two beep sounds
and the red indicator will flash. Now the
headset is turned off. (Please refer to Fig.7 and
Fig.8.) Fig.7 Fig.8
4.Pairing the headset:
(1)The headset must be powered off before you begin to initiate the pairing. Press
the “Button 1” till the blue and red indicators begin to flash alternatively. The
headset is now in pairing mode.
(2)Initiate the pairing process of your bluetooth mobile phone.
(Please refer to the manual of your mobile phone.)
(3)When asked the PIN code, please enter “0000” to
successfully complete the pairing process.
(4)When the pairing process is successfully completed, the blue
indicator will flash. The headset is now in standby mode.
(5)After the headset is successfully paired with your mobile
phone. In some case, you will still have to connect the headset
with your mobile phone. (Please refer to the mobile phone
manual.) (Please refer to Fig.9.) Fig.9
Note:
(1)If the headset is not in pairing mode, your mobile phone can not find the headset.
Please set the headset into pairing mode before you start to pair the headset with
your phone.
(2)If no pairing is possible over a period of time (Aprox. 1 minute), the pairing
process will be stopped. You have to repeat STEP 4 to successfully complete the
pairing.
5.Answering or ending calls:
When the headset is paired with your phone, and when there is an incoming call, you
will hear a musical ring. Then press the “Button 1” to answer the call. When there is
a call in session, you can press the “ Button 1 ” to end the call.
Note:
Because of the different design of some mobile phones, a
disconnection may automatically happen even when the
headset is powered on. In this case, the headset will not ring if
there is an incoming call. Press “Button 1” for 1 second to
re-connect the headset with the mobile phone for an incoming
call.(Please refer to Fig.10.)
Fig.10
6.Making calls:
(1) Voice-dialing:
Press the “Button 1”. After hearing a beep sound, say the name of the person you
recorded on your phone. (The availability of this function depends on the design of
the mobile phone you use. Please refer to the manual of your mobile phone for the
voice-dialing function. )
(2)Dial the phone number on you mobile phone as you normally do. The sound will
be transmitted to the headset automatically.
7.Changing the volume of the Headset:
(1) Press the “Button 2” to increase the listening volume of the headset.
(2) Press the “Button 3 ” to decrease the listening volume of the headset.
(3) You can also adjust the volume from your mobile phone. Please refer to the
manual of your mobile phone.
8.Redialing the call:
After ending the call, you can press the “Button 2” to redial the call you just ended.
(The availability of this function depends on the design of the mobile phone you use.
Please refer to the manual of your mobile phone.)
9.Mute function:
You may have to keep a call on line while talking to others. Push the “Button 2” and
the “Button 3” at the same time for one second. You will hear continuous beep
sounds. Now the headset is in “Mute function” mode. To disable the “Mute
function”, press the “Button 2 ” and the “Button 3” at the same time once again.
10.Rejecting a call
When there is a call in session, you can press the “Button 1” for three seconds to
reject a call.
Function of Buttons:
Button 1: Turning on or turning off the headset, Pairing, Answering or Ending a call,
Voice-Dialing, Rejecting a call
Button 2: Volume-up, Redial
Button 3: Volume-down
Button 2 + Button3: Mute function
Trouble-Shooting:
1.The red indicator flashes:
It indicates that headset is in low-battery. Charge the battery until the red indicator is
turned off.
2.If no connection between the headset and your phone:
Make sure that the bluetooth headset fully charged. Repeat the step 3 to complete the
pairing process. Make sure that the headset is within 10 meters of your phone and
that there are no obstructions such as walls or other electronic device between the
headset and your phone. If the steps above do not solve the problem, please refer to
the manual of your mobile phone for
more information.
Note: This headset is complied with Bluetooth Specification 1.2. However, the
interoperability of this headset and other devices is not guaranteed because of the
compatibility.
Product Care:
1.Avoid humidity, liquid or moisture as this device is not water-proof.
2.Avoid high and low temperature, especially in a car.
3.Please do not dissemble the headset.
4.Please do not use chemical, cleaning solvent or strong detergent to clean the
headset. And avoid sharp object.
5.Please do not change or modify the headset. Any change or modification will void
the warranty of the product.
6.Do not dispose the headset into a fire. This may result in an explosion.
7.Use only the attached charger when you charge the headset.

Produktspezifikationen

Marke: Energy Sistem
Kategorie: Kopfhörer
Modell: Linnker 5000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Energy Sistem Linnker 5000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Kopfhörer Energy Sistem

Energy Sistem

Energy Sistem Freestyle Bedienungsanleitung

29 August 2024
Energy Sistem

Energy Sistem Sport 1+ Dark Bedienungsanleitung

29 August 2024
Energy Sistem

Energy Sistem Headset Office 3 Bedienungsanleitung

11 August 2024
Energy Sistem

Energy Sistem Headphones BT Urban 2 Radio Bedienungsanleitung

9 August 2024
Energy Sistem

Energy Sistem Office 2 Bedienungsanleitung

6 August 2024
Energy Sistem

Energy Sistem Office 2+ Bedienungsanleitung

5 August 2024
Energy Sistem

Energy Sistem Headphones 2 Bluetooth Bedienungsanleitung

5 August 2024
Energy Sistem

Energy Sistem Headphones BT Travel 6 ANC Bedienungsanleitung

27 Juli 2024
Energy Sistem

Energy Sistem Urban 3 Mic Bedienungsanleitung

25 Juli 2024
Energy Sistem

Energy Sistem Linnker 5000 Bedienungsanleitung

22 Juli 2024

Bedienungsanleitung Kopfhörer

Neueste Bedienungsanleitung für -Kategorien-

AKG

AKG K920 AFC Bedienungsanleitung

16 Oktober 2024
GoGEN

GoGEN HBTM 41WR Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis HPBT2102BK Bedienungsanleitung

15 Oktober 2024
AKG

AKG Y600NC Bedienungsanleitung

15 Oktober 2024
Vakoss

Vakoss MH954 Bedienungsanleitung

14 Oktober 2024
Skullcandy

Skullcandy Cassette Bedienungsanleitung

14 Oktober 2024
Audio-Technica

Audio-Technica ATH-ANC29 Bedienungsanleitung

14 Oktober 2024
Daewoo

Daewoo AVS1421 Bedienungsanleitung

14 Oktober 2024
Vakoss

Vakoss MH942 Bedienungsanleitung

14 Oktober 2024
Philips

Philips SHB7150 Bedienungsanleitung

13 Oktober 2024