EMOS ZU220.6 Bedienungsanleitung

EMOS heater ZU220.6

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EMOS ZU220.6 (18 Seiten) in der Kategorie heater. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/18
1546137500_31-ZU220.6_00_01 148 × 210 mm ZDROJ: 1546136700_31-ZU210.12_00_01
www.emos.eu
GB LED Highbay
CZ LED Svítidlo pro vysoké stropy (Highbay)
SK LED Svietidlo pre vysoké stropy (Highbay)
PL LED High-bay
HU LED-es szerelvény High-bay világításhoz
SI LED svetilka za visoke strope (Highbay)
RS|HR|BA|ME LED držači svjetla za High-bay rasvjetu
DE LED-Hallenleuchte (Highbay)
UA Cвітлодіодний світильник для високої стелі (Highbay)
RO|MD Lampă LED pentru tavane înalte (Highbay)
LT Pramoninių šviestuvų LED šviestuvo tvirtinimas
(Highbay)
LV LED gaismekļa stiprinājums augstu griestu
apgaismojumam (Highbay)
EE LED-valgustusseade kõrgjoaga valgusti jaoks (Highbay)
BG LED осветително тяло за помещения
с високи тавани (Highbay)
ZU210.12
ZU210.9
ZU210.6
ZU215.12
ZU215.9
ZU215.6
ZU220.12
ZU220.9
ZU220.6
2
1 2
5
4a
3
4b
a
Mounting
A
Mounting
B
3
1 2
Model Voltage Frequency CCT Wattage PF Lumen Beam Angle Dimension Working
temperature Weight
ZU210.12 100–277 V 50/60 Hz 4 000 K 100 W ≥0.9 17 000 lm 120° ø 265 × 163 mm -35~+50°C 2.15 kg
ZU210.6 100–277 V 50/60 Hz 4 000 K 100 W ≥0.9 17 000 lm 60° ø 265 × 163 mm -35~+50°C 2.15 kg
ZU210.9 100–277 V 50/60 Hz 4 000 K 100 W ≥0.9 17 000 lm 90° ø 265 × 163 mm -35~+50°C 2.15 kg
ZU215.12 100–277 V 50/60 Hz 4 000 K 150 W 0.9 25 500 lm 120° ø 300 × 173 mm -35~+50°C 2.65 kg
ZU215.6 100–277 V 50/60 Hz 4 000 K 150 W ≥0.9 25 500 lm 60° ø 300 × 173 mm -35~+50°C 2.65 kg
ZU215.9 100–277 V 50/60 Hz 4 000 K 150 W ≥0.9 25 500 lm 90° ø 300 × 173 mm -35~+50°C 2.65 kg
ZU220.12 100–277 V 50/60 Hz 4 000 K 200 W 0.9 34 000 lm 120° ø 340 × 178 mm -35~+50°C 3.25 kg
ZU220.6 100–277 V 50/60 Hz 4 000 K 200 W ≥0.9 34 000 lm 60° ø 340 × 178 mm -35~+50°C 3.25 kg
ZU220.9 100–277 V 50/60 Hz 4 000 K 200 W ≥0.9 34 000 lm 90° ø 340 × 178 mm -35~+50°C 3.25 kg
Installation of Converters DALI
GB | LED Highbay
LED Highbay is designed for mounting onto a solid base or
for hanging both indoors and outdoors.
Ingress Protection IP65 – for outdoor use
Mounting
Method A: Loop
Install the loop with gasket to luminaire well in the specied
position.
Hang the luminaire well into the hook.
Wiring 1 to power supply cable: Brown-L; Blue-N; Green-G;
Wire 2 to dimmer: Purple – Dim+, Grey – Dim-.
Method B: Bracket
1. Remove four screws holding the driver.
2. Insert the bracket between the driver and the body of
the luminaire.
3. Screw the screws back to their original location.
4. Install 2 pcs M8 expanding bolts on the mounting surface
as per the hole position on our luminaire.
5. Loose the auxiliary screws on two sides of the bracket.
Rotate the luminaire to desirable degree and tighten
auxiliary screws again.
6. Wiring 1 to power supply cable: Brown-L; Blue-N; Gre-
en-G; Wiring 2 for dimming: Purple – Dim+, Grey – Dim-
Installation height 2.5 m.
L
G
N
L – brown – live wire
G – green&yellow – earth wire (ground)
N – blue – neutral wire
Dim +
Dim -
Dim+ – purple – Dimming +
Dim- – grey – Dimming –
Dimming can be realised in two ways via convertors ZU9001
and ZU9002: 0–10 V, DALI.
Installation of Converters
ZU9001 is an isolated signal converter which allows to use
0–10 V dimming.
ZU9002 is an isolated signal converter, transforming the
DALI signal to 0–10 V output. It conforms to the DALI protocol
IEC62386-101/101/207.
1. Turn the cover to left and lift outwards to take it down.
2. Insert the connector of the controller into the interface
and rotate the controller device clockwise direction.

Produktspezifikationen

Marke: EMOS
Kategorie: heater
Modell: ZU220.6

Brauchst du Hilfe?

Wenn Sie Hilfe mit EMOS ZU220.6 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung heater EMOS

Bedienungsanleitung heater

Neueste Bedienungsanleitung für -Kategorien-