Elica Leone ELN136S2 Bedienungsanleitung

Elica Dunstabzugshaube Leone ELN136S2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Elica Leone ELN136S2 (31 Seiten) in der Kategorie Dunstabzugshaube. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/31
Use, Care, and
Installation Guide
Guide
d’utilisation,
d’entretien et
d’installation
GuĂ­a de
instalaciĂłn, uso y
mantenimiento
READ AND SAVE THESE
INSTRUCTIONS
LISEZ CES
INSTRUCTIONS ET
CONSERVEZ-LES
LEA Y CONSERVE
ESTAS INSTRUCCIONES
LIB0152213
Printed in Mexico
10/18
Models: KIT0154387
4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
Tools needed
• Drill
• 1¼” (3 cm) drill bit
• ³⁄₁₆” (0.5 cm) drill bit
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdriver
Parts needed
• 6 - 9 AWG wires, one each of the following colors: black,
white, red, blue, gray, and green or green/yellow (ground)
The length of the conduit and AWG wires is NOTE:
determined by the distance between the in-line blower
motor and range hood terminal boxes.
• 11 - UL listed wire connectors
Parts supplied
Remove parts from packages. Check that all parts are
included.
Strain relief connector 2
4.2x8 mm screws 6
6-wire blower connector 1
4x1.8 mm flat washers 4
Rectangular bracket - Motor cover
2
Bracket- Connector support
1
6.3x60 mm screws 4
9-wire blower connector 1
Strain Reliefs
Ø Ø 12 mm 15.9 mm
1
6x13.5 mm
2
Torx 20 adapter 1
Torx 10 adapter 1
Strap 2.5x95 mm
2
7
3 For or EVV648S1, EVV636S1 range hood models
you have to remove the spacer and the dip trays before
removing the internal motor blower.
A
BA. Drip trays screws
B. Drip trays
AB
A. Spacer screws
B. Spacer
4 Remove the range hood internal motor blower.
B
A
A. Blower
B. Blower screws
5 Install the rectangular brackets (included in kit) with
screws (4)4.2x8 mm.
6 Install the spacer, dip trays and grease lters.
B
A
A. Rectangular brackets
B. Screws
B. For dual Blower Motor Models (ECL136S4, ECL142S4,
ECL148S4, ELI142S2, ELI136S2, ETR134S1, EAR140S4,
EAR146S4, EAR134S4, ELN136S2, ELN142S2, ELN148S1)
1 Remove the lters, the mounting screws and lock washers.
A
B
A. Screw with locker
washer
B. Mounting Hole
2 For ELN136S2, ELN142S2, ELI136S2, ELI142S2,
EAR134S4 range hood models you have to remove
the blower mounting screws from the top of the hood
housing.
A. Blower screws
A


Produktspezifikationen

Marke: Elica
Kategorie: Dunstabzugshaube
Modell: Leone ELN136S2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Elica Leone ELN136S2 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Dunstabzugshaube Elica

Bedienungsanleitung Dunstabzugshaube

Neueste Bedienungsanleitung fĂźr -Kategorien-