Electrolux ETM5200SD Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Electrolux ETM5200SD (28 Seiten) in der Kategorie Kühlschrank. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
Refrigerator User manual
Top mount
Bottom mount
Single door all refrigerator
Single door all freezer
Built-in refrigerator
Built-in freezer
2
CONTENTS
3 Important safety instructions
4 General warnings
5 Top mount freezer model features
5 Bottom mount freezer model features
6 Single door all refrigerator model features
6 Single door all freezer model features
7 Built-in refrigerator model features
7 Built-in freezer model features
8 Ice & water models
9 Installing your new appliance
10 Initial start up
11 Ice & water installation
15 Electronic display controls electronic
models only
15 Controlling the temperature
15 Freezer temperature alarm
15 Door alarm
15 Child lock
16 Drinks chill timer
16 Energy efficiency
17 Electronic display controlsice & water
models only
17 Controlling the temperature
17 Freezer temperature alarm
17 Door alarm
18 Child lock
18 Drinks chill timer
18 Energy efficiency
19 Fast ice
19 Filter replacement
19 Manual (rotary) controls manual models
20 Using your appliance
20 Crisper bin
21 Door storage bins
21 Dairy compartment
21 Chiller bin
21 Bottle caddy
21 Freezer drawers
21 Freezer baskets
22 Spillsafe glass shelves
22 Slide away glass shelf
22 Deodoriser
22 Bottle twist holder
23 Twist ice & serve
23 Ice station
23 Care and maintenance
23 Changing the lightbulb
24 Cleaning the appliance
25 Troubleshooting
26 Ice & water troubleshooting
27 Warranty
WERE THINKING OF YOU
Thank you for purchasing an Electrolux appliance.
You’ve chosen a product that brings with it decades
of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So
whenever you use it, you can be safe in the knowledge
that youll get great results every time.
Welcome to Electrolux.
LEGEND
The symbols you will see in this booklet have
these meanings:
WARNING!
This symbol indicates information concerning your
personal safety
CAUTION!
This symbol indicates information on how to avoid
damaging the refrigerator
IMPORTANT!
This symbol indicates tips and information about use
of the refrigerator
ENVIRONMENT!
This symbol indicates tips and information about
economical and ecological use of the refrigerator
CONDITIONS OF USE
This appliance is designed and intended to be used in
normal domestic applications only.
RECORD MODEL AND SERIAL
NUMBER HERE:
Model:
Serial No:
3
Before you use the refrigerator, we recommend that you
read through the relevant sections of this manual, which
provides the description of your appliance and
its functions.
To avoid the risks that are always present when you use
an appliance, it is important that the appliance is installed
correctly and that you read the safety instructions carefully
to avoid misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners.
IMPORTANT!
Check for any damage or marks
If you find the refrigerator is damaged or marked, you
must report it within 7 days if you wish to claim for
damage/marks under the manufacturer’s warranty.
This does not affect your statutory rights.
INFORMATION ON DISPOSAL
FOR USERS
ENVIRONMENT!
Most of the packing materials are recyclable. Please
dispose of those materials marked with the recycle
symbol through your local recycling depot or by
placing them in appropriate collection containers.
If you wish to discard this product, please contact
your local authorities and ask for the correct method
of disposal.
Local authorities will have the latest information
regarding safe disposal of the product.
Incorrect disposal may expose the user to injury
from sharp objects, flammable gasses or cause
environmental damage.
Refrigerant gasses within the unit should only be
discharged by qualified persons. A licence may be
required by your local authorities to discharge or
reclaim the refrigerant gasses. Incorrect discharge of
gasses may expose the user to injury fromammable
gasses or cause environmental damage.
WARNING!
When you dispose of your old refrigerators or freezers
remove any doors. Children can suffocate if they get
trapped inside a discarded unit.
WARNING!
If pressurised aerosol containers bear the
wordflammable and/or a small flame
symbol, do not store them inside any
refrigerator or freezer. If you do so you
may cause an explosion.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience or
knowledge, unless they are being supervised or have
been given instruction concerning use of the appliance
by a person responsible for their safety. Children
should be supervised to ensure that they
do not play with the appliance.
Don’t use a steam cleaner. If live components come
into contact with condensing steam, they may short
circuit or cause an electric shock.
Do not use mechanical devices or other means to
accelerate the defrosting process other than those
recommended by the manufacturer.
This appliance contains insulation formed with
flammable blowing gases. Avoid safety hazards
by carefully disposing of this appliance.
R600a refrigerant warning
This appliance contains flammable R600a refrigerant.
Avoid safety hazards by carefully installing, handling,
servicing and disposing of this appliance.
Ensure that the tubing of the refrigerant circuit is
not damaged during transportation and installation.
In the event any damage accidentally occurs, keep the
appliance away from open res and any devices that
produce sparks or arcs and luminaries during normal
or abnormal operation, and unplug the appliance at
the power point. Call authorised service for necessary
action and advice.
Leaking refrigerant may ignite vent area if leak occurs.
The room for installing appliance must be at least
1m3 per 8g of refrigerant. The amount and type of
refrigerant in the appliance can be found on the rating
plate inside the appliance.
It is hazardous for anyone other than an Authorised
Service Person to service this appliance. In
Queensland Australia - the Authorized Service Person
MUST hold a Gas Work Authorisation for hydrocarbon
refrigerants, to carry out servicing or repairs which
involve the removal of covers.
Switching off your appliance
If the appliance needs to be switched off for an extended
period, the following steps should be taken to reduce the
symptoms of mould:
1. Remove all food.
2. Remove the power plug from the power point.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged open slightly
for air circulation.
4
GENERAL WARNINGS
Read the following carefully to avoid damage or injury
This symbol indicates never to do this
This symbol indicates always do this
It is important to use your refrigerator safely.
Check these safety points before using your refrigerator.
The appliance must be plugged into its own dedicated
220-240V, 50Hz AC electrical outlet.
Ensure that the electrical outlet is properly earthed. Consult
a qualified electrician if you are unsure.
If the power cord is damaged, it must be replaced by the
manufacturer, it’s service agent or similarly qualified persons
in order to avoid a hazard.
Check that the power cord can reach the power point.
Don’t plug your refrigerator into an extension cord or double
adaptor.
Unplug the appliance before cleaning or moving.
Choose a location that is not too cold – the ambient
temperature should be above 10°C.
Put the refrigerator in a dry place avoiding areas of high
moisture or humidity.
Keep ventilation openings in the appliance enclosure or in
the built-in structure clear of obstruction.
The plug to the appliance must be accessible when the unit
is in the installed position.
Never unplug the appliance by pulling on the power cord.
Always grip the plug firmly, and pull straight
out of the receptacle to prevent damaging the
power cord.
Don’t plug your refrigerator into a timer fitted to
the power point.
Do not put the refrigerator in frosty or unprotected areas, for
example in a garage or on a veranda.
Do not put the refrigerator in direct sunlight, near stoves,
fires or heaters.
Do not put the refrigerator on an uneven surface.
Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
Never store fizzy drinks in the freezer compartment.
Never try to repair the refrigerator yourself, only use a
qualified or authorised service person for repairs.
Never use electric heaters or dryers to defrost the freezer
because you can receive an electric shock.
Do not damage the refrigerant circuit.
CAUTION!
Automatic aerosol systems (such as insect control)
should not be located adjacent to the product as the
spray may cause long term damage to the external
plastics of the appliance.
Note: You must read these warnings carefully
before installing or using the refrigerator. If you need
assistance, contact your Customer Care Department.
The manufacturer will not accept liability, should these
instructions or any other safety instructions incorporated
in this book be ignored.
For Ice & Water models only
Check for water leaks at all water connection points in the
first two or three hours after installation. Re-check after 24
hours to ensure connection is watertight. If the connection
is leaking, contact a licensed plumber.
Do not use with water that is microbiologically unsafe
or with water of unknown quality without adequate
disinfection.
Never connect the appliance to a hot water supply.
Never install the water filter in an area of the wall where
there may be electrical wires and/or water supply pipes.
Never install the water filter in an area of direct sunlight.
5
TOP MOUNT FREEZER MODEL (TM)
1 Sensor (electronic models only)
2 Freezer light (electronic models only)
3 Freezer air delivery vents
4 Adjustable Spillsafe™ glass shelf
5 Twist ice & serve with ice cube trays
6 Freezer air return vents
7 Sensor (electronic models only)
8 Deodoriser
9 Fridge and freezer temperature controls
(manual control models)
10 Adjustable Spillsafe™ glass shelves
11 Spillsafe™ slide away shelf (where fitted)
12 Fridge light
13 Bottle caddy
14 Deli compartments (full width on some models)
15 Crisper humidity controls
16 Crisper bins (full width on some models)
17 Adjustable rollers
18 Freezer door bins
19 Dairy compartments
20 Egg tray
21 Adjustable door bins
22 Full width door bin
23 Bottle twist holder (where fitted)
24 Full width door bin (can bin on smaller models)
25 Stabilising foot
BOTTOM MOUNT FREEZER MODEL (BM)
17
1 Deodoriser
2 Fridge and freezer temperature controls
(manual control models)
3 Spillsafe™ slide away shelf (where fitted)
4 Bottle caddy
5 Adjustable Spillsafe™ glass shelf
6 Fridge light
7 Deli compartments (full width on some models)
8 Crisper humidity controls
9 Crisper bins (full width on some models)
10 Freezer storage tray
11 Twist & serve ice
12 Ice bin with scoop (inside freezer drawer)
13 Freezer drawers on telescopic extension slides
14 Adjustable rollers
15 Dairy compartments
16 Adjustable door bins
17 Egg tray
18 Bottle twist holder (where fitted)
19 Full width bottle bin
20 Full width bottle bin (can bin on smaller models)
21 Stabilising foot
Note: Product illustrations demonstrate various features but may not
be completely in line with current products.
Note: Product illustrations demonstrate various features but may not
be completely in line with current products.
1
1
18
19
20
21
22
23
24
25
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
15
16
17
18
19
20
21
2
3
4
5
6
7
8
9
10
11
12
13
14
6
SINGLE DOOR ALL REFRIGERATOR MODEL (AR)
1 Deodoriser
2 Fridge temperature control
3 Adjustable Spillsafe™ glass shelves
4 Spillsafe™ slide away shelf (where fitted)
5 Fridge light
6 Deli compartments
7 Bottle caddy
8 Crisper humidity control
9 Full width crisper bin
10 Adjustable rollers
11 Dairy compartments
12 Egg tray
13 Adjustable door bins
14 Bottle twist holder
15 Full width bottle bins
16 Can bin
17 Stabilising foot
1 Freezer temperature control
2 Freezer light
3 Air delivery vents
4 Adjustable Spillsafe™ glass shelves
5 Twist & serve ice
6 Freezer storage tray
7 Ice bin with scoop (inside freezer drawer)
8 Freezer drawers on telescopic extension slides
9 Stabilising foot
10 Adjustable rollers
SINGLE DOOR ALL FREEZER MODEL (AF)
Note: Product illustrations demonstrate various features but may not be
completely in line with current products.
Note: Product illustrations demonstrate various features but may not be
completely in line with current products.
1
11
12
13
14
15
16
17
1
2
3
4
5
6
7
8
10
9
2
3
4
5
6
7
3
8
9
10
7
BUILT-IN REFRIGERATOR
1 Deodoriser
2 Fridge temperature control
3 Adjustable Spillsafe™ glass shelves
4 Slideable deli compartment
5 Fridge light
6 Bottle caddy
7 Crisper humidity control
8 Full width crisper bin
9 Dairy compartments
10 Egg tray
11 Half width door bins
12 Bottle restrainers
13 Full width bottle bins
14 Can bin
1 Freezer temperature control
2 Freezer light
3 Air delivery vents
4 Adjustable Spillsafe™ glass shelves
5 Twist ice & serve with ice cube trays
6 Freezer baskets with clear fascia
BUILT-IN FREEZER
Note: Product illustrations demonstrate various features but may not be
completely in line with current products.
Note: Product illustrations demonstrate various features but may not be completely in
line with current products.
1
9
10
11
12
13
14
1
2
3
4
5
4
6
2
3
4
3
5
6
3
7
8
8
BOTTOM MOUNT ICE & WATER MODEL
1 LED light
2 Electronic controls
3 Spillsafe™ slide away shelf (where fitted)
4 Adjustable Spillsafe™ glass shelf
5 LED fridge light
6 Deli compartments
7 Crisper humidity controls
8 Crisper bins
9 Deodoriser
10 Freezer storage tray
11 Ice maker assembly
12 Ice bin with scoop (inside freezer drawer)
13 Freezer drawers on telescopic extension slides
14 Adjustable rollers
15 Dairy compartments
16 Adjustable door bins
17 Egg tray
18 Bottle twist holder (where fitted)
19 Full width bottle bin
20 Full width bottle bin (can bin on smaller models)
21 Stabilising foot
Note: EBE5160 shown. Product illustrations demonstrate various
features but may not be completely in line with current products.
1
15
16
17
18
19
20
21
2
3
4
5
6
7
9
8
10
11
12
13
14
11
WARNING!
Connect to potable water supply only
The external waterlter kit
An external waterlter and connection kit has been
supplied for use with your Ice & Water refrigerator.
The external filter design allows more space within the
refrigerator and provides double the life of previous lters
reducing the cost of replacement.
The filter is designed to significantly reduce chlorine, taste,
odour, heavy metals, turbidity (cloudiness) and scale
build up. The included plastic water tube allows quick
connection to the filter and is designed for high durability
and kink resistance.
This filter is designed only to be used with a potable
water supply. It should not be used on water that is micro
biologically unsafe or with water of unknown quality. The
filter should be replaced every 12 months. The service life
of the filter may be reduced in water supplies that contain
an excess of particles or other impurities. Reduced flow
rate is an indication that a new filter is required. Failure to
replace the filter when required can affect the function of
the ice maker. Service calls caused by a failure to replace
the filter are not covered by warranty.
Contents of installation kit
DATE FITTED___/___/___
1 x water filter with push fit connections
2 x mounting brackets and screws
4 + 1 metres of water tubing
1 x 1/2” tap fitting
2 x circlips
ICE & WATER INSTALLATION
Please read before beginning installation
The water connection to your ice and water product can
be self-installed. It is recommended that you seek advice
from a licensed plumber (if necessary) before commencing
the installation.
CAUTION!
Your warranty may be voided by an incorrect
installation
Water supply and plumbing
A drinkable water supply to suit a 1/2tap fitting is
required adjacent to the refrigerator. It is recommended
that a licensed plumber install a new water supply outlet
nearer to the appliance should the tubing supplied not be
long enough. It is not recommended that the tubing be
extended as this could adversely affect theow of water to
the ice maker or water dispenser.
The water dispenser and automatic ice maker require a
drinkable water supply with a pressure range of between
206kPa and 689kPa (30PSI and 100PSI). If the water
supply is above 100psi, a pressure limiting valve should
be installed.
It is recommended that a Noise Reduction Valve also
be fitted in the water supply line. This will reduce water
hammer and its effects from quick action house hold taps
and fast acting valves on appliances. The refrigerator water
valve is pre-fitted with a push-fit connector for inserting the
water tube. Where the tap connection is other than 1/2”
adapters can be purchased from plumbing supply stores
or good hardware stores.
Water filter
Locate the waterlter as close as possible to the water
supply tap in a vertical position where possible. Thelter
will need to be replaced every 12 months to prevent
excessltered micro-organism build-up, and thus ensure
continuous purified water and ice supply for you and
your family. Replacement water filters are available from
Electrolux Home Products Spare Parts Centres and can
be posted to you for your convenience (refer to back page
for contact details).
CAUTION!
If the appliance is not connected to a water supply
ensure that the ice maker is switched off (refer to
STEP 1 overleaf). If you don’t do this a loud buzzing
noise will be heard intermittently. The new hose-sets
supplied with the appliance must be used and old
hose-sets should not be reused. Do not use with
water that is microbiologically unsafe or with water of
unknown quality without adequate disinfection.
Never connect the appliance to a hot water supply.
Never install the water filer in an area of the wall
where there may be electrical wires and / or water
supply pipes.
12
Never install the water filter in an area of direct sunlight.
Check for water leaks at all water connection points in
the first 2 to 3 hours after installation, and correct it in
case of any water leak. Recheck after 24 hours; if leak still
occurs, it is recommended to contact a licensed plumber
for advice.
Water is to be connected as per diagram below.
sink
brackets
mains
water inlet
kitchen
cupboard
filter
Step 1.
Ensure that the ice maker and water dispenser are
switched OFF
Step 2.
Disconnect refrigerator from power supply.
ICE & WATER INSTALLATION
Step 3.
Connect tap fitting to water supply tap. Tap must be
close to the refrigerator.
Step 4.
Install brackets for filter close to tap. Plan to leave as
much tubing as possible behind the refrigerator to enable
it to be moved easily for cleaning or service.
CAUTION!
Do not screw the brackets into the refrigerator as this
may void your warranty and permanently damage the
refrigerator.
Step 5.
Write date on filter. The filter will need to be replaced
every 12 months.
date tted 1
Step 6.
Extend the collar and clip a circlip around the collar at
both ends of the filter.
13
Step 7.
Fit filter to brackets with water flow arrow pointing up.
water
flow
direction
Step 8.
Push shorter tube into tap fitting past insertion mark.
Step 9.
Push other end into filter INLET.
Step 10.
Connect remaining tube length into filter OUTLET.
Step 11.
Connect other end of remaining tube length to inlet on
bottom right hand side of refrigerator.
inlet location
ICE & WATER INSTALLATION
Step 12.
Turn on water and check all joints and tubes for leaks.
Step 13.
Reconnect the power.
Step 14.
Move the refrigerator back into place being careful not to
kink or split the tubing.
14
Step 15.
Using a large container run the water dispenser to clear
air from lines. This may take a few minutes. Purge and
dispense a minimum of 2 litres of water. Initial water may
be black in colour. This is residual carbon dust from the
filter and is non-toxic. If the water is slow to shut off or
the dispenser is dripping, air may still be in the lines.
Either purge more water through the system to remove
this air or allow some time for the air to be removed over
subsequent dispensing.
Step 16.
Switch ON Ice Maker.
Step 17.
After 24 hours remove ice bin and dispose of first few
batches of ice to ensure that impurities have been flushed
from the system.
ICE & WATER INSTALLATION
Tips and Useful Information
Ensure that taps are turned off when replacing and fitting
filters. Remember to turn the taps back on when filter
fitting is complete.
Always fit filter as per manufacturers instructions, paying
special attention to water flow direction.
If you need to replace water tube, only use approved
water quality piping that meets the pressure requirements.
Do not allow the water tubing to become kinked
or trapped under the refrigerator when moving the
refrigerator back into position.
Make sure your refrigerator is level to avoid uneven ice
cubes.
After installation, run the water dispenser for a few
minutes to remove carbon dust and to ensure that all air
bubbles have been purged from the tubing. Dripping may
occur if air bubbles remain in the tube.
Replace filter at suggested intervals to avoid water/ice
reduction and irregularities in taste.
Remove and clean ice bin once a month, discarding
unused ice cubes. This will ensure fresh, clean ice and
smooth operation of your ice maker.
Clean and empty the dispenser drip tray regularly to avoid
overflow.
As the water cut off is not instant, leave glass under
dispenser briefly until water has stoppedowing to
avoid spills.
If you have not used the dispenser for some time:
Discard the first seven or eight cups of water
Discard any ice that the ice maker produces in the
first 24 hours (contaminants could have settled in
the water pipes).
15
The electronic display panel consists of an LCD display
with black backlighting and 6 touch buttons. When the
power is first turned on, the display with backlighting will
come on.
If no buttons have been pressed and the fridge door is
closed the backlighting will turn off after 30 seconds.
fridge
alarm
res e t
drinks
chill
freezer
fast
fre e ze
ec o/
vacation
NOTE: If no buttons have been pressed for
approximately 60 seconds, there may be a delay of up
to 2 seconds before the display reacts. This is normal
and is to prevent accidental changes to settings.
Controlling the temperature
We recommend that when you start your refrigerator for
the first time, the temperature for the refrigerator is set to
C and the freezer to -18°C. If you want to change the
temperature, follow the instructions below. Make only
small adjustments and wait 24 hours to see if its correct.
Checking the softness of ice cream is a good indication if
your freezer is the right temperature, while checking the
temperature of water kept in the refrigerator is a good way
of checking the temperature of the food compartment.
NOTE: When you set a temperature, you set an
average temperature for the whole refrigerator cabinet.
Temperatures inside each compartment may vary,
depending on how much food you store and where you
place it. High or low room temperature may also affect
the actual temperature inside the refrigerator.
Changing the freezer temperature
freezer
Press the freezer button to make the
freezer colder in 1°C steps. Once the
maximum of -2C is reached, the display
will return to -14°C with the next press of the button. The
bar graph gets smaller with colder freezer settings.
Changing the refrigerator temperature
fridge
Press the fridge button to make the
refrigerator colder in 1°C steps. OnceC
is reached, the display will return to 7°C
with the next button press. The bar graph gets smaller with
colder refrigerator settings.
Fast freeze function
fast
freeze
Use the fast freeze function when you add
a large amount of food to the freezer
compartment. This freezes the food quickly
but does not affect the temperature in the refrigerator
compartment. To use this function, press the fast freeze
button once. An animated icon will light up. The fast freeze
function will now operate for 90 minutes. If you want to turn
the fast freeze function off before 90 minutes have passed,
simply press the fast freeze button again. The icon will
disappear and the freezer will return to normal operation.
Freezer temperature alarm
alarm
reset
If the alarm sounds for no apparent reason,
check whether anything is keeping the
door open. If the freezer becomes too
warm due to the freezer door being left open or warm food
being placed too close to the temperature sensor, a buzzer
will sound.
The icon adjacent to the alarm reset button, the freezer
set temperature and bar graph will allash, until the
alarm reset button is pressed. Once pressed, the alarm
disable icon adjacent to the alarm button will illuminate
for 50 minutes, or until the temperature drops to an
acceptable level.
Make sure nothing is holding the freezer door open and
move any warm food away from the temperature sensor. If
the freezer is still too warm after 50 minutes, the alarm will
sound again, indicating that something may be wrong with
the refrigerator.
NOTE: The freezer temperature alarm can be reset
for 12 hours by pressing the alarm reset button
continuously for 10 seconds.
Door alarm
If the fridge door is left open for more than two minutes,
the alarm will buzz and an arrow pointing to an open
door will flash, along with the temperature setting and bar
graph. If you want to leave the door open while you load
the refrigerator, you can turn the alarm off for 8 minutes by
pressing the alarm reset button.
Child Lock
fridge
freezer
Press and hold the freezer and
fridge buttons together to activate
the child lock. This will disable the
display to prevent accidental
changes to settings. To turn the child lock off, press and
hold the freezer and fridge buttons together.
ELECTRONIC DISPLAY CONTROLS – ELECTRONIC MODELS
reset
drinks
freeze
eco/
17
ELECTRONIC DISPLAY CONTROLS – ICE & WATER MODELS
The electronic display panel consists of an LCD display
with white backlighting. When the power is first turned on,
the display, with backlighting, will activate.
If no buttons have been pressed and the fridge door is
closed the backlighting will turn off after 30 seconds.
Controlling the temperature
We recommend that when you start your refrigerator for
the first time, the temperature for the refrigerator is set to
C and the freezer to -1C. If you want to change the
temperature, follow the instructions below. Make only
small adjustments and wait 24 hours to see if its correct.
Checking the softness of ice cream is a good indication
if your freezer is the right temperature, while feeling the
coldness of water kept in the refrigerator is a good way
of checking the temperature of the food compartment.
NOTE: When you set a temperature, you set an
average temperature for the whole refrigerator cabinet.
Temperatures inside each compartment may vary,
depending on how much food you store and where you
place it. High or low room temperature may also affect
the actual temperature inside the refrigerator.
If no button has been pressed for some time there
may be a delay of up to 2 seconds before the display
responds, this is normal and is a part of the display
design to reduce the chance of accidental changes.
Changing the freezer temperature
Press the Select button until the freezer compartment
is illuminated on the refrigerator icon. Use the arrows to
the left and right of the display to select a higher or lower
temperature in 1˚c steps. Once the maximum of -23 ˚c is
reached, the display will return to -14 ˚c with the next press
of the button.
Changing the refrigerator temperature
Press the Select button until the food compartment is
illuminated on the refrigerator icon. Use the arrows to
the left and right of the display to select a higher or lower
temperature in 1˚c steps. Oncec is reached, the display
will return to 7˚c with the next press of the button.
Boost function
Use the boost function when you add a large amount
of food to the fridge compartment. To use this function,
press the Modes button until Boost is illuminated. Boost
function chills the food quickly but does not affect the
temperature in the freezer compartment.
The boost function will operate for 90 minutes before
automatically returning to normal operation. If you want
to turn the boost off before 90 minutes have passed,
simply press the Modes button again until the Boost
icon disappears and the refrigerator will return to
normal operation.
Freezer temperature alarm
If the alarm sounds for no apparent reason, check whether
anything is keeping the door open. If the freezer becomes
too warm due to the freezer door being left open or warm
food being placed too close to the temperature sensor, a
buzzer will sound.
If the freezer temperature alarm sounds, press any button
to disable the alarm.
Make sure nothing is holding the freezer door open and
move any warm food away from the temperature sensor. If
the freezer is still too warm after 50 minutes, the alarm will
sound again, indicating that something may be wrong with
the refrigerator.
NOTE: The freezer temperature alarm can be reset for
12 hours by holding the alarm reset button continuously
for 10 seconds.
Door alarm
If the fridge or freezer door is left open for more than two
minutes, the alarm will buzz and an arrow pointing to an
open door will ash, along with the temperature setting
and bar graph. If you want to leave the door open while
you load the refrigerator, you can turn the alarm off for 8
minutes by pressing any button.
If the fridge door is left open for more than 30 minutes, the
light will automatically turn off to save energy. To turn the
light back on simply close and reopen the door again.


Produktspezifikationen

Marke: Electrolux
Kategorie: Kühlschrank
Modell: ETM5200SD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Electrolux ETM5200SD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kühlschrank Electrolux

Bedienungsanleitung Kühlschrank

Neueste Bedienungsanleitung für -Kategorien-