Electro-Voice Sx 250 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Electro-Voice Sx 250 (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂĽr 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
SK1 Rigging Kit
The SK1 Rigging Kit features rigging track and hardware
that allows you to suspend any Sx250 or SxA250. Its
assembly is quick and easy with the hardware already
provided on your Sx250 or SxA250.
SK1
Rigging Kit
Installation Instructions
Item 1
Item Description Qty.
1 Rigging Handle Assembly with 5” Track 1
2 Ancra Anchor Plate 1
3 Single Stud Ancra Track Fitting w/Safety Pin 2
Step 1: Remove original handle insert
Remove original handle insert by removing
the four screws shown. Keep these
screws to assemble the rigging handle insert.
Step 2: Attach Rigging Handle
Using the four screws removed in
Step 1, attach rigging handle (Item 1) to
speaker.
SK1 Rigging Kit Includes
SK1 Rigging Kit Assembly (SxA250 Shown)
Item 3
Safety Pin
Item 2
Kit can be installed at
either handle location.
(SxA250 only)
Part Number 38110-093 Rev B
U.S.A. and Canada only. For customer orders,
contact the Customer Service department at
800/392-3497 Fax: 800/955-6831
Europe, Africa and Middle East only. For customer orders,
contact the Customer Service department at
49 9421-706 0 Fax: 49 9421-706 265
For warranty information, contact the Service Repair department at:
616/695-6831 or 800/685-2606
For technical assistance, contact Technical Support at:
866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 6/2005
WARNING: Suspending any object is potentially dangerous and should only be attempted by individuals who have
a thorough knowledge of the techniques and regulations of rigging objects overhead. Electro-Voice
® strongly recommends that SxA
speakers be suspended taking into account all current national, federal, state and local regulations. It is the responsibility of the
installer to ensure that SxA speakers are safely installed in accordance with all such regulations. If SxA speakers are suspended,
Electro-Voice® strongly recommends that the system be inspected at least once a year. If any sign of weakness or damage is
detected, remedial action should be taken immediately. There are also data sheets for each EV hanging hardware part that should
also be consulted prior to suspending speakers.
Step 3: Attach Anchor Point
Remove the screws shown from the back of
the enclosure. Use these to attach the Ancra
Anchor (Item 2) to the enclosure.
Step 4: Attach Track Fittings
Attach one Ancra Track Fitting (Item 3) to the
Rigging Handle and one to the Anchor point.
SK1 Rigging Kit Assembly
MAKE SURE THE SAFETY PIN IS
PROPERLY FASTENED TO EACH TRACK
FITTING BEFORE SUSPENDING.


Produktspezifikationen

Marke: Electro-Voice
Kategorie: Lautsprecher
Modell: Sx 250

Brauchst du Hilfe?

Wenn Sie Hilfe mit Electro-Voice Sx 250 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Electro-Voice

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂĽr -Kategorien-