Electro Harmonix Clockworks Bedienungsanleitung

Electro Harmonix Hi-Fi-Anlage Clockworks

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Electro Harmonix Clockworks (4 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war fĂĽr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
CLOCKWORKS
Rhythm Generator / Synthesizer
Congratulations on your purchase of the Electro-Harmonix CLOCKWORKS!
The CLOCKWORKS is perfect as a master clock for sequencers and drum
machines as well as for triggering electronic percussion, classic EHX drum
synths such as the Crash Pad or any other electronic device that can be
triggered by pulses. Best of all, it is a faithful reissue of the much sought-
after classic first released by Electro-Harmonix in 1980.
CLOCKWORKS does not create sound on its own but instead generates
pulses to trigger other devices. The pulse trigger can set the tempo for a
drum machine or sequencer such as an EHX 8 Step. CLOCKWORKS’ pulses
might directly play a device by triggering a sound or note in the external
device. The great thing about the CLOCKWORKS is you have four separate
clock channels so you can connect four devices which will all play
rhythmically with each other.
The CLOCKWORKS may look complicated but what it does is actually pretty
simple: it takes a master clock and divides down its frequency by a whole
number between 1 and 8, outputting a pulse at the new frequency created
by the divider. There are 4 clock dividers or channels, each driven from the
same master clock, so creating polyrhythms is fun and easy! Each channel
has its own clock divider control, output level control and output jack. The
master clock can be generated internally by the CLOCKWORKS or may come
from an outside source. Although the CLOCKWORKS looks very much like a
digital product, it is actually fully analog, not that there is anything wrong
with digital products.
WARNING:
Your CLOCKWORKS comes equipped with an Electro-Harmonix
18V -5 power supply. The CLOCKWORKS requires up to 300mA at DC 00mA
18VDC with a center POSITIVE plug. The CLOCKWORKS does not take
batteries. Using the wrong adapter ower supply may damage your unit and /p
void the warranty.
- CONTROLS, INDICATORS & I/O-
The following descriptions detail all of the sliders, switches, LEDs (lights) and
I/O jacks on the CLOCKWORKS:
CH 1-4 DIVISOR Sliders & LEDS
Each channel has its own independent DIVISOR slider control. Set a given
channel’s clock divider by moving the center of its DIVISOR slider to the
number you wish to divide by. For example, if you want Channel 2 to divide
the master clock by 3, set the CH 2 DIVISOR to 3, centering the slider on the
mark for 3.
Above each DIVISOR slider is an LED. The LED blinks each time the channel
sends out its clock pulse.
CH 1-4 LEVEL Sliders
Each channel has its own independent output LEVEL control. The LEVEL
slider sets a given channel’s output pulse amplitude or level. The maximum
output pulse level is 10Vpp. The pulse waveform ranges from 0V to +10V, it
does not go below 0V. As you bring the LEVEL sliders down, the amplitude
decreases to 0V.
HOW TO SET THE LEVEL CONTROL:
Start with the LEVEL control at its bottom position. Move the LEVEL control
upwards while listening to or watching the slave device to which the channel
is connected. At lower LEVEL settings the slave device might not be triggered
at all or by only every other pulse from the Clockworks. Push the LEVEL
control up until each pulse from the Clockworks triggers the slave. Once you
reach this position, push LEVEL up a little bit more and then stop. The LEVEL
control is now set.
OUT 1 - OUT 4 Output Jacks
Each clock divider channel has its own independent output jack. CH 1
connects to OUT 1, CH 2 to OUT 2, etc. The level of the pulse at each output
jack is controlled by its channel’s LEVEL slider. These jacks are mono/TS ¼”
jacks; insert any standard patch or instrument cable into the jacks.
CLOCK TEMPO Slider
The TEMPO slider located in the CLOCK section of the Clockworks adjusts the
master tempo or speed of the internal clock generator. When the CLOCK
toggle switch is set to INT (for internal), the TEMPO slider sets the tempo
that all four clock channels follow. TEMPO slider range: in BPM: 50BPM –
2,400BPM; in Hz: 0.85Hz - 40Hz.
CLOCK LEVEL Slider
The LEVEL slider located in the CLOCK section of the Clockworks adjusts the
output level of the internal master clock sent to the CLOCK IN/OUT jack. The
maximum output pulse is 14Vpp. The pulse waveform ranges from 0V to
+14V, it does not go below 0V. As you bring the LEVEL slider down, the
amplitude decreases to 0V. See the section on the previous page entitled
HOW TO SET THE LEVEL CONTROL for help setting the CLOCK LEVEL
control.
CLOCK INT/EXT Switch
The CLOCK switch determines the source for the master clock sent to the
four individual channels. When set to INT, the master clock is generated
internally by the Clockworks (and set by the TEMPO slider). The internal
clock is also sent out the CLOCK IN/OUT jack when set to INT.
When the CLOCK switch is set to EXT (for external), the internal clock is shut
off and the Clockworks connects the external clock present at the CLOCK
IN/OUT jack to the four clock divider channels. If no clock is connected to
the CLOCK IN/OUT jack, the Clockworks TEMPO LED does not blink, it
remains in a static state. When set to EXT, the CLOCK LEVEL slider is
inactive. The CLOCK TEMPO slider adjusts the amplitude of the external
clock. We recommend you set TEMPO anywhere between its maximum and
middle slider positions when using external clock. The acceptable input
amplitude range for the external clock signal is 4Vpp to 15Vpp for a clock
that swings positive only or +/-2 Vpp to +/-7.5 Vpp for a bi-polar clock. The
maximum acceptable external clock frequency that yields full pulse amplitude
out of all four channels is 65 Hz. The output pulses drop in amplitude as the
clock frequency rises above 65 Hz.
CLOCK LED
The LED above the TEMPO slider blinks at the same rate as the master clock
signal whether the clock is generated internally or externally.
CLOCK IN/OUT Jack
When set to INT mode, the CLOCK IN/OUT jack is an output, the internally
generated clock pulses will be output from this jack. When set to EXT mode,
CLOCK IN/OUT is an input, connect your externally generated clock to this
jack.
18V Power Jack
Insert the output plug from the supplied 18VDC/500mA AC Adapter that
came with your Clockworks into the 18V power jack located at the front of
your Clockworks. The Clockworks’ power jack is center positive, requiring
18VDC with a minimum current rating of 300mA. The Clockworks can be
powered from a voltage as low as 15VDC but the maximum output pulse
amplitude will decrease and the maximum divisor, at the slider s lowest ’
position, may increase to 9 or 10. We do not recommend powering the
Clockworks with voltages below 15VDC which may yield unpredictable
results.

Produktspezifikationen

Marke: Electro Harmonix
Kategorie: Hi-Fi-Anlage
Modell: Clockworks

Brauchst du Hilfe?

Wenn Sie Hilfe mit Electro Harmonix Clockworks benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Hi-Fi-Anlage Electro Harmonix

Electro Harmonix

Electro Harmonix Pico POG Bedienungsanleitung

25 August 2024
Electro Harmonix

Electro Harmonix White Finger Bedienungsanleitung

18 August 2024
Electro Harmonix

Electro Harmonix Nano POG Bedienungsanleitung

11 August 2024
Electro Harmonix

Electro Harmonix Tone Corset Bedienungsanleitung

7 August 2024
Electro Harmonix

Electro Harmonix Bass Preacher Bedienungsanleitung

6 August 2024
Electro Harmonix

Electro Harmonix Soul Preacher Bedienungsanleitung

8 Februar 2024
Electro Harmonix

Electro Harmonix POG 2 Bedienungsanleitung

15 September 2023
Electro Harmonix

Electro Harmonix Platform Bedienungsanleitung

2 Juli 2023
Electro Harmonix

Electro Harmonix Clockworks Bedienungsanleitung

2 Juli 2023
Electro Harmonix

Electro Harmonix Micro POG Bedienungsanleitung

12 Juni 2023

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Lenco

Lenco MC-129 MP3 Bedienungsanleitung

16 Oktober 2024
Akai

Akai EIE Pro Bedienungsanleitung

14 Oktober 2024
Sennheiser

Sennheiser SZI 1029 Bedienungsanleitung

7 Oktober 2024
Yamaha

Yamaha MusicCast SRT-1500 Bedienungsanleitung

7 Oktober 2024
Kicker

Kicker 46HDTPH Bedienungsanleitung

7 Oktober 2024
Vtech

Vtech V-Kids Bedienungsanleitung

5 Oktober 2024
Hitachi

Hitachi AX-M10E Bedienungsanleitung

5 Oktober 2024
IDance

IDance XD8N Bedienungsanleitung

5 Oktober 2024
LD Systems

LD Systems DAVE 18 G3 Bedienungsanleitung

4 Oktober 2024
Pyle Pro

Pyle Pro PWMA1216BM Bedienungsanleitung

4 Oktober 2024