Eizo FORIS FS2332 Bedienungsanleitung

Eizo Monitor FORIS FS2332

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Eizo FORIS FS2332 (63 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/63

Important

Please read PRECAUTIONS, this User’s Manual, and Setup Guide

(separate volume) carefully to familiarize yourself with safe and

effective usage.

• Please refer to the Setup Guide for basic information ranging from

connection of the monitor to a PC or external device to using the

monitor.

• The latest User’s Manual is available for download from our web site:

http://www.eizo.com

2

Location of Caution Statement

CR Coin Lithium Battery contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Product specication may vary with sales areas. Conrm the specication in the manual written in language of the

region of purchase.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information condential

unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.

Although every effort has been made to ensure that this manual provides up-to-date information, please note that

EIZO monitor specications are subject to change without notice.

Noticeforthismonitor

Notice for this monitor

This product is suited to creating documents, viewing multimedia content, and other general purposes.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable for power cords and signal cables specied by us.

Use optional products manufactured or specied by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more

after the monitor power has been turned on.

In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in

lower brightness is recommended.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to

“Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on

the LCD panel, this is not malfunction. Percentage of effective dots: 99.9994% or higher.

The backlight of the LCD panel has a xed life span. When the screen becomes dark or begins to icker, please contact

your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the

interference patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If

the pressure marks remain on the panel, leave the monitor with a white or black screen. The symptom may disappear.)

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt

to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation

may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation

disappears, otherwise it may cause some damages to the monitor.

Produktspezifikationen

Marke:	Eizo
Kategorie:	Monitor
Modell:	FORIS FS2332
Touchscreen:	Nein
Bildschirmdiagonale:	23 "
Anzahl der Farben des Displays:	16,78 Millionen Farben
Eingebaute Lautsprecher:	Ja
Integrierte Kamera:	Nein
Mitgelieferte Kabel:	AC, AUX, DVI
Produktfarbe:	Schwarz
RMS-Leistung:	0.5 W
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
On-Screen-Display (OSD):	Ja
Menüsprachen:	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
Schnellstartübersicht:	Ja
Zertifizierung:	TCO Displays 5.2, EPEAT Silver (US), TÜV/Ergonomics (including ISO 13406-2), TÜV/GS, TÜV/NRTL, c-Tick, CE, CB, cTÜVus, FCC-B, Canadian ICES-003-B, TÜV/S, VCCI-B, EPA, RoHS, WEEE, CCC
Stromverbrauch (Standardbetrieb):	34 W
Betriebsanleitung:	Ja
Plug & Play:	Ja
HD-Typ:	Full HD
Natives Seitenverhältnis:	16:9
Reaktionszeit:	6 ms
Kontrastverhältnis:	1000:1
Bildwinkel, horizontal:	178 °
Bildwinkel, vertikal:	178 °
Anzahl HDMI-Anschlüsse:	2
Anzahl der Lautsprecher:	2
Stromverbrauch (Standby):	1 W
Sichtbare Größe (diagonal):	580 mm
PC Audio-Eingang:	Ja
Gewicht (ohne Ständer):	5400 g
Breite (ohne Standfuß):	549 mm
Tiefe (ohne Standfuß):	58 mm
Höhe (ohne Standfuß):	393 mm
Unterstützte Video-Modi:	1080p, 480p, 720p
Unterstützte Grafik-Auflösungen:	1920 x 1080 (HD 1080)
3D:	Nein
Panel-Montage-Schnittstelle:	100 x 100 mm
Gerätebreite (inkl. Fuß):	549 mm
Gerätetiefe (inkl. Fuß):	212 mm
Gerätehöhe (inkl. Fuß):	403 mm
Gewicht (mit Ständer):	6200 g
Neigungswinkelbereich:	20 - 5 °
Kabelsperre-Slot:	Nein
Anzahl VGA (D-Sub) Anschlüsse:	1
Anzahl DVI-D-Anschlüsse:	1
Seitenverhältnis:	16:9
Nachhaltigkeitszertifikate:	ENERGY STAR
Anzahl OSD-Sprachen:	9
Helligkeit (typisch):	250 cd/m²
Sichtbare Größe (horizontal):	509.8 mm
Sichtbare Größe (vertikal):	286.7 mm
Pixel Abstand:	0.265 x 0.265 mm
Vertikaler Scanbereich:	55 - 76 Hz
Horizontaler Scanbereich:	31 - 81 kHz
Stromeingang:	Ja
TV Tuner integriert:	Nein
Thin Client installiert:	Nein
Display-Auflösung:	1920 x 1080 Pixel