Eizo DuraVision FDS1904 Bedienungsanleitung

Eizo Monitor DuraVision FDS1904

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Eizo DuraVision FDS1904 (57 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/57

Important

Please read this User’s Manual, and the Setup Manual (separate

volume) carefully to familiarize yourself with safe and e󰀨ective usage.

• Please refer to the Setup Manual for basic information ranging from

monitor installation to using the monitor.

• The latest User’s Manual is available for download from our web site:

www.eizoglobal.com

User’s Manual

Color LCD Monitor

Touch Panel Color LCD Monitor

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

e󰀨ort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

Notice for this monitor

This product may not be covered by warranty for uses other than those described in the Setup Manual.

The specications noted in this manual are only applicable when the following are used:

• Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to

the composition of the rubber. Check the desk surface before use.

It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more

after the monitor power has been turned on, and then adjust the monitor.

Monitors should be set to a lower brilliance to reduce changes in luminosity caused by long-term use and

maintain a stable display.

When the screen image is changed after displaying the same image for extended periods of time, an

afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for

extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer

to “Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may

appear on the LCD panel, this is not a malfunction. Percentage of e󰀨ective dots: 99.9994% or higher.

The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker,

please contact your local EIZO representative.

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do

not attempt to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation

may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead

wait until the dew condensation disappears, otherwise it may cause some damage to the monitor.

When mounting the monitor in an enclosure, always ground the monitor to avoid the e󰀨ects of static

electricity on the monitor internals and LCD panel.

(Cautions for the Use of the Touch Panel)

• During touch operation

Be careful of the following points. Otherwise, damage may occur to the monitor.

- Do not strongly press, scratch, or poke the panel.

- Do not touch the panel with hard objects such as ballpoint pens or metals.

Produktspezifikationen

Marke:	Eizo
Kategorie:	Monitor
Modell:	DuraVision FDS1904
Bildschirmdiagonale:	19 "
Bildschirmtechnologie:	LED
Anzahl der Farben des Displays:	16,78 Millionen Farben
Eingebaute Lautsprecher:	Nein
Integrierte Kamera:	Nein
Produktfarbe:	Schwarz
AC Eingangsspannung:	85 - 264 V
AC Eingangsfrequenz:	50 - 60 Hz
On-Screen-Display (OSD):	Ja
Menüsprachen:	Englisch
Betriebstemperatur:	-15 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Zertifizierung:	CB, CE, RoHS, WEEE, China RoHS, IEC60945, IEC62288/IEC61174/IEC62388, KC
Display:	LED
Stromverbrauch (max.):	64 W
Betriebsanleitung:	Ja
HD-Typ:	Nicht unterstützt
Bildschirmform:	Flach
Natives Seitenverhältnis:	5:4
Reaktionszeit:	20 ms
Kontrastverhältnis:	2000:1
Bildwinkel, horizontal:	178 °
Bildwinkel, vertikal:	178 °
Stromverbrauch (Standby):	7 W
Gewicht (ohne Ständer):	5900 g
Breite (ohne Standfuß):	429 mm
Tiefe (ohne Standfuß):	75 mm
Höhe (ohne Standfuß):	406 mm
VESA-Halterung:	Ja
3D:	Nein
DVI Anschluss:	Ja
Stromverbrauch (PowerSave):	9 W
Kabelsperre-Slot:	Nein
Anzahl VGA (D-Sub) Anschlüsse:	3
Anzahl DVI-D-Anschlüsse:	1
Seitenverhältnis:	5:4
Panel-Typ:	TN
Helligkeit (typisch):	590 cd/m²
Sichtbare Größe (horizontal):	376.3 mm
Sichtbare Größe (vertikal):	301 mm
Pixel Abstand:	0.294 x 0.294 mm
Integrierter USB-Hub:	Nein
TV Tuner integriert:	Nein
Separate H/V-Sync:	Ja
Thin Client installiert:	Nein
Sync-On-Green (SOG):	Ja
Composite-Sync:	Ja
Display-Auflösung:	1280 x 1024 Pixel