Eizo DuraVision FDS1721T Bedienungsanleitung

Eizo Monitor DuraVision FDS1721T

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Eizo DuraVision FDS1721T (52 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/52

Important

Please read PRECAUTIONS, this User’s Manual, and the Setup Guide

(separate volume) carefully to familiarize yourself with safe and

effective usage.

• Please refer to the Setup Guide for basic information ranging from

connection of the monitor to a PC to using the monitor.

• The latest User’s Manual is available for download from our web site:

http://www.eizo.com

2

Location of Caution Statement

This product has been adjusted specically for use in the region to which it was originally shipped. If operated

outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior

arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been

made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are

subject to change without notice.

Noticeforthismonitor

Notice for this monitor

This product is suited to general purposes like creating documents, viewing multimedia content.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

• Power cords provided with the product

• Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after the

monitor power has been turned on, and then adjust the monitor.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a

stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to

“Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on

the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.

The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact

your local EIZO representative.

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt

to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may

occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until

the dew condensation disappears, otherwise it may cause some damage to the monitor.

(Cautions for the Use of the Touch Panel)

• During touch operation

Be careful of the following points. Otherwise, damage may occur to the monitor.

- Do not strongly press, scratch, or poke the panel.

- Do not touch the panel with hard objects such as ballpoint pens or metals.

Produktspezifikationen

Marke:	Eizo
Kategorie:	Monitor
Modell:	DuraVision FDS1721T
Touchscreen:	Ja
Bildschirmdiagonale:	17 Zoll
Bildschirmtechnologie:	TN
Anzahl der Farben des Displays:	16,78 Millionen Farben
Eingebaute Lautsprecher:	Ja
Integrierte Kamera:	Nein
Mitgelieferte Kabel:	AC, DVI, USB, VGA
Produktfarbe:	Schwarz
Neigungsverstellung:	Ja
RMS-Leistung:	1 W
AC Eingangsspannung:	100-240 V
AC Eingangsfrequenz:	50 - 60 Hz
Kopfhörerausgänge:	1
Menüsprachen:	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
Betriebstemperatur:	0 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 80 %
Schnellstartübersicht:	Ja
Zertifizierung:	CE, CB, cTUVus, FCC-B, Canadian ICES-003-A, TUV/S, VCCI-B, WEEE, CCC, RCM, EAC
Stromverbrauch (max.):	29 W
Bildschirmform:	Flach
Helligkeit:	200 cd/m²
Reaktionszeit:	5 ms
Kontrastverhältnis:	1000:1
Bildwinkel, horizontal:	170 °
Bildwinkel, vertikal:	160 °
Anzahl der Lautsprecher:	2
Stromverbrauch (Standby):	0.6 W
Unterstützt Windows-Betriebssysteme:	Ja
Gewicht (ohne Ständer):	4800 g
Breite (ohne Standfuß):	380 mm
Tiefe (ohne Standfuß):	58 mm
Höhe (ohne Standfuß):	353 mm
VESA-Halterung:	Ja
DVI Anschluss:	Ja
Panel-Montage-Schnittstelle:	100 x 100 mm
Stromverbrauch (PowerSave):	2.6 W
Gerätebreite (inkl. Fuß):	380 mm
Gerätetiefe (inkl. Fuß):	157 mm
Gerätehöhe (inkl. Fuß):	397.5 mm
Gewicht (mit Ständer):	7500 g
Netzteiltyp:	AC
Neigungswinkelbereich:	0 - 30 °
Art des Touchscreens:	Tisch
Anzahl VGA (D-Sub) Anschlüsse:	1
Anzahl DVI-D-Anschlüsse:	1
Nachhaltigkeitszertifikate:	RoHS
Schwermetallfrei:	Hg (Quecksilber)
Wandmontage:	Ja
Audioanschlüsse:	Ja
NVIDIA G-SYNC:	Nein
Pixel Abstand:	0.264 x 0.264 mm
AMD FreeSync:	Nein
Display, sichtbarer Bereich BxH:	337.9 x 270.3 mm
sRGB:	Ja
Anzahl der vorgeschalteten Steckplätze:	1
Separate H/V-Sync:	Ja
Touchscreen Technologie:	Akustische Oberflächenwelle
Abmessungen, metrisch (B x T x H) mit Standfuß:	380 x 157 x 397.5 mm
Display-Auflösung:	1280 x 1024 Pixel