Edimax GS-1008E Bedienungsanleitung

Edimax Schalten GS-1008E

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Edimax GS-1008E (9 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
GS-1008E
Quick Installaon Guide
04-2016 / v1.0
2
Product Informaon
Package Contents
Before you start using this switch, please check if there is anything missing in
the package, and contact your dealer to claim the missing item(s):
GS-1008E Switch
Quick Installaon Guide
Power Adapter
Hardware Overview
LED Status
LED Name
Light
Status
Descripon
PWR
On
Switch is on
O
Switch is o
LNK/ACT
On
Corresponding port is connected
O
Corresponding port is not connected
Flashing
Corresponding port is active and transferring
/receiving data.
Power Port
Power Indicator
LED Indicators
24 X 10/100/1000Mbps RJ-45 Ports
3
Operang Environment
This switch must be installed and operated within the limits of the specied
operang temperature 0 - 40°C (32 - 104°F) and humidity (10 - 90%
non-condensing).
- Do not place objects on top of the unit.
- Do not obstruct any vents at the sides of the unit.
- Do not posion the unit close to any heang source such as a heater,
radiator or in direct exposure to sun.
- Take care to ensure the unit does not come into contact with water.
Consider using a dehumidier to reduce humidity and prevent moisture
entering the unit.
Connecng to network devices
The RJ-45 ports on the switch support Auto-MDI/MDI-X which allows either
straig -through or cross-over type cables to connect this switch to a ht
workstaon or switch.
Connect one end of the network cable to the RJ-45 port on the side panel, and
connect the other end of the network cable to the RJ-45 port on the network
device. Follow the same procedure to connect all RJ-45 ports of the switch.
The UTP network cables must comply with EIA/TIA 568 specicaons and
Category 5 standard for data transmission. The maximum length for a UTP
cable segment between the switch and connected devices is 100 meters
(300).
Once the network cable is connected to both ends and the aached network
device is powered on, the green LNK/ACT LED should be lit.


Produktspezifikationen

Marke: Edimax
Kategorie: Schalten
Modell: GS-1008E

Brauchst du Hilfe?

Wenn Sie Hilfe mit Edimax GS-1008E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalten Edimax

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung für -Kategorien-