Eaton 9130i2000R-XL2U Bedienungsanleitung

Eaton Unterbrechungsfreies Stromversorgungssystem 9130i2000R-XL2U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Eaton 9130i2000R-XL2U (118 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/118

Powerware Series

Eaton 9130 UPS

700–3000 VA

User's Guide

Class A EMC Statements

(Low Voltage Models over 1500 VA)

FCC Part 15

NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

ICES-003

This Class A Interference Causing Equipment meets all requirements of the Canadian Interference Causing

Equipment Regulations ICES‐003.

Cet appareil numérique de la classe A respecte toutes les exigences du Reglement sur le matériel brouilleur du

Canada.

EN 62040-2

Some configurations are classified under EN 62040-2 as “Class‐A UPS for Unrestricted Sales Distribution.” For

these configurations, the following applies:

WARNING This is a Class A‐UPS Product. In a domestic environment, this product may cause radio interference, in

which case, the user may be required to take additional measures.

VCCI Notice

Eaton, Powerware, ABM, and LanSafe are registered trademarks and ConnectUPS is a trademark of Eaton

Corporation or its subsidiaries and affiliates. National Electrical Code and NEC are registered trademarks of National

Fire Protection Association, Inc. Phillips is a registered trademark of Phillips Screw Company. All other trademarks

are property of their respective companies.

reproduced in any way without the express written approval of Eaton Corporation.

Class B EMC Statements

(Low Voltage Models up to 1500 VA and

High Voltage Models up to 3000 VA)

FCC Part 15

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

SReorient or relocate the receiving antenna.

SIncrease the separation between the equipment and the receiver.

SConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.

SConsult the dealer or an experienced radio/TV technician for help.

ICES-003

This Class B Interference Causing Equipment meets all requirements of the Canadian Interference Causing

Equipment Regulations ICES‐003.

Cet appareil numérique de la classe B respecte toutes les exigences du Reglement sur le matériel brouilleur du

Canada.

VCCI Notice

Produktspezifikationen

Marke:	Eaton
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	9130i2000R-XL2U
Display-Typ:	LCD
Breite:	438 mm
Tiefe:	600 mm
Gewicht:	29000 g
Produktfarbe:	Schwarz
Akku-/Batterietyp:	VRLA 12V/9 Ah
Höhe:	86.5 mm
Stecker:	C14-Koppler
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 90 %
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 40 °C
Geräuschpegel:	44 dB
RS-232 port:	1
Formfaktor:	Rackmount
Ausgangsleistung:	1800 W
Eingangsfrequenz:	45/65 Hz
Sicherheit:	IEC/EN 62040-1, IEC/EN 62040-2
Leistungsfaktor:	0.9
Effizienz:	94 %
Anzahl der AC-Ausgänge:	9 AC-Ausgänge
Eingangs-Betriebsspannung (min):	180 V
Eingangs-Betriebsspannung (max):	276 V
Ausgangskapazität:	2 kVA
Ausgangs-Betriebsspannung (min):	220 V
Ausgangs-Betriebsspannung (max):	240 V
AC-Steckertypen:	C13 coupler,C19 coupler
Typische Backup-Zeit bei halber Belastung:	24 min
Typische Backup-Zeit bei voller Belastung:	6 min
Stromstärke (maximal):	10 A
Rack-Kapazität:	2U
Hot-Swap-Batterie:	Ja
Crest-Faktor:	3:1