DPA D:fine 4067 Bedienungsanleitung

DPA Mikrofon D:fine 4067

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für DPA D:fine 4067 (7 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
w w w . d p a m i c r o p h o n e s . c o m
Headset Microphones Manual
d:fineTM Omnidirectional
d:fineTM Directional
d:fineTM 4065
d:fineTM 4066
d:fineTM 4067
d:fineTM 4088
d:fineTM 66
d:fineTM 88
w w w . d p a m i c r o p h o n e s . c o m / d f i n e
Omnidirectional characteristics
• The microphone is sensitive to sound from all directions.
• The sound remains more or less the same regardless of
the distance between the sound source and the microphone.
• The positioning of microphones with omnidirectional
characteristics is less critical than with directional.
• An omnidirectional microphone is generally not very
sensitive to wind, breathing and handling noises.
Directional characteristics
• Rejects background noise and creates higher separation.
• The microphone is most sensitive to sound on the side of the chevron.
• The positioning of mics with directional characteristics is essential
as the low frequency level will change according to the distance to the mouth.
Choose a distance which yields the desired amount of bass.
• Care should be taken to protect against wind and pop noise e.g. by using
a windsceen.
Introduction
All the d:fineTM Headset Microphones provide a uniquely natural and open sound.
Ultra-lightweight and adjustable, d:fineTM Headset Mics ensure a secure and
comfortable fit in live performance environments. To ensure optimal performance
of your d:fine Headset Mic, please follow the simple instructions below.
Placement of microphone
For discreet placement, you can bend the microphone boom slightly so that the cap-
sule is as close to the cheek as possible. Do not hold the capsule while bending; bend
the wire boom, making a smooth
curve with your thumb to best fit
the profile of the face.
Mount a directional mic 2 – 3
cm (1 in) from the corner of the
mouth to ensure optimal sound
quality compared to an omnidi-
rectional mic that can be placed
further away from the mouth.
Adjusting the d:fine
TM
4065
4065 is pre-formed but may require adjustment in order to get a tight, fixed position to the back of
the neck. Adjust the steel tube carefully at the curves.
A protection grid is mounted over the microphone head. If clogged with dirt or make-up,
gently remove it and clean it with distilled water.
Adjusting the d:fineTM 4066, 4067, and 4088
The size of the headset mount can easily be adjusted. Change the standard bend by carefully expand-
ing the distance between the earhooks.
To change sides, simply click the boom out of the clips and switch it over to the other side.
The remaining two clips are not used. The soft cable must not be attached into the clips.
Adjusting the d:fine Omnidirectional, d:fine Directional, d


Produktspezifikationen

Marke: DPA
Kategorie: Mikrofon
Modell: D:fine 4067

Brauchst du Hilfe?

Wenn Sie Hilfe mit DPA D:fine 4067 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon DPA

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-