Digitus DN-651107 Bedienungsanleitung

Digitus Schalten DN-651107

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Digitus DN-651107 (7 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
Industrial 5-Port Gigabit Switch
User Manual - DN-651107
Introduction
This hardened industrial 5 port Gigabit Ethernet Switch is equipped with
wide range VAC and VDC power input. It is suitable for heavy usage
environments such as hazardous environments or central control areas
where a reliable device is critical. It is an ideal solution for Industrial
Automation, IP surveillance, traffic monitoring and a wide range of
applications. It has been rigorously tested for your security, transportation
and telco applications.
Features
ï‚Ÿ Hardened design Aluminum enclosure
103.5 x 32 x 81.5 mm (L x W x D)
ï‚Ÿ Supports 18-36VAC/12-60VDC
ï‚Ÿ Surge protection diodes on power input.
ï‚Ÿ ESD protection diodes on RJ-45 port
ï‚Ÿ Provides increased Noise Immunity
 Extended environment specification -40°C to 75°C
Installation package
This unit can be din-rail mounted or wall-mounted. Din-rail brackets and
wall-mounted brackets are included.
Package Content:
1x Main unit
1x User Manual
2x Wall Mount Bracket
1x DIN Rail Bracket
1x 4 pin Terminal Block
4x Screws
Wall mount
bracket x 2 Philips Head Screw x 4
Din Rail Bracket x 1
4 pin Terminal Block x 1
Power connection
This unit provides a 4 pin terminal block. It can be operated using 12-
56VDC/18-36VAC power source. Always make sure your input voltage is
within this supported voltage range.
To connect power: This unit supports two power inputs. Follow the printed
polarity for +V1-, +V2- and ground. Connect positive wires to V+, connect
negative wires to V-, and connect a neutral wire to the ground screw.
+V1- is for power input one connection.
+V2- is for power input two connection.
Power connecting procedure:
ï‚Ÿ STEP 1
–
Take out 4 pin terminal block located in the included
mounting kit package.
ï‚Ÿ STEP 2
–
Connect power wires to +V1- or +V2- with
corresponding polarity. Connect the grounding wire
to the ground screw.
ï‚Ÿ STEP 3
–
Plug into terminal block socket shown above.
Polarity needs to match V+ and V-.
WARNING:
Always SHUT OFF power source to connect power wire.
WARNING:
Any exceeded input voltage will not make this unit function and may
damage this unit.
+V1- +V2-


Produktspezifikationen

Marke: Digitus
Kategorie: Schalten
Modell: DN-651107

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digitus DN-651107 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalten Digitus

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung für -Kategorien-