Digitus DA-71035 Bedienungsanleitung

Digitus Schalten DA-71035

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Digitus DA-71035 (9 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
USB 3.0
External HDD Enclosure 3.5" (8,89cm)
User Manual
DA-71035
Foreword
Congratulations on your purchase of our product! We will show you a new storage concept with safety
and convenience, It is our pleasure to give you the best solution to expand your HDD`s Capacity and
enhance your data`s reliability in PC system or Mac system. Before using the product, please read this
manual carefully for further recognizing of the product.
I. System Requirement
Hardware requirement: a PC or Notebook with free USB interface
Operation system: Windows 7/Vista/XP/2000
II. Feature
• Screwless design, easy install or remove disk drive
• Suitable for 3.5” (8,89cm) SATA HDD
• Compliant with USB 3.0 to SATA interface
• Transfer rate max up to 5Gb/s
• Backwards compatibility with USB 2.0, supports High-Speed (480Mbps)
• One touch backup function
• Support Hot-Plugging, and Plug & Play compatible
• Power Supply: AC100~240V input, DC 12V/2A output
III. Package content
Before using the product, please check the contents in the package as follows.
If it is not correct, please contact the local dealers timely.
• USB 3.0 External HDD Enclosure, 3.5 inches (8,89cm)
• Power adapter 12V/2A
• Product supported CD (Multi-language User Manual)
• User Manual
• USB 3.0 connection cable
IV. Hardware Install
1. Slide the button to position, [OPEN]
2. Slide the top cover to the direction of USB socket
3. Remove the top cover
4. Connect the 3.5" (8,89cm) SATA HDD to the 22pin SATA connector at the rear of the HDD firmly
5. Push the HDD into the enclosure slowly and carefully
6. Slide the top cover to the main case
7. Slide the button to the [CLOSE] position
8. Insert the enclosure to the attached stand
9. Connect the USB 2.0 connection cable to enclosure and PC
10. Connect the power adapter to the enclosure and power source


Produktspezifikationen

Marke: Digitus
Kategorie: Schalten
Modell: DA-71035

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digitus DA-71035 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalten Digitus

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung fĂĽr -Kategorien-